Guangzhou Yuanxing Industrial Co., Ltd.
| Payment Terms | T/T, Western Union,paypal |
| Supply Ability | 600 set per month |
| Delivery Time | 5-7 working days |
| Packaging Details | 45*45*45cm |
| Product Name | 8 pot brake kit |
| Color | Sliver |
| Caliper Material | Aluminum |
| Fitted Disc | 362mm |
| Application | Auto Part |
| Disc Material | Grey cast iron HT250 |
| Bell Type | Floating |
| Bell Bracket Material | Aluminum 6061 |
| Brand Name | Jekit |
| Model Number | GT8 |
| Place of Origin | China |
View Detail Information
Explore similar products
Cast Iron 405mm Disc 8 Pot Brakes Red Caliper GT8 For Toyota LC200
380mm Disc 8 Pot Brakes Black Aluminum Caliper Full Floating Bell
20in Wheel 8 Pot Brakes Auto With Full Floating Bell Bracket Aluminum 6061
Jekit Drilled Brake Disc 405mm 6061 Big Brake Kit Caliper With Bell Bracket
Product Specification
| Payment Terms | T/T, Western Union,paypal | Supply Ability | 600 set per month |
| Delivery Time | 5-7 working days | Packaging Details | 45*45*45cm |
| Product Name | 8 pot brake kit | Color | Sliver |
| Caliper Material | Aluminum | Fitted Disc | 362mm |
| Application | Auto Part | Disc Material | Grey cast iron HT250 |
| Bell Type | Floating | Bell Bracket Material | Aluminum 6061 |
| Brand Name | Jekit | Model Number | GT8 |
| Place of Origin | China | ||
| High Light | 362mm Cast Iron Front Disc Brake ，HT250 Brake Conversion Kit ，HT250 Front Disc Brake Conversion Kit | ||
Jekit Big Brake Kit White Caliper 8 Pot 362mm Disc Full Floating Bell
We produces high-tech brake calipers for the original equipment of high-end models in various categories.
Aluminum fixed brake calipers adopt single structure or two-piece structure to ensure extreme light weight and best performance. The number of pistons ranges from 2 to 6, and in some cases up to 8, depending on the size.
We pays special attention to the design of brake calipers, which aims to perfectly integrate performance and comfort.
Jekit and the system method used ensure the comfort of the product, which requires an in-depth understanding of all elements involved in braking
How to choose brake kit
The improvement of braking performance, good ventilation and heat dissipation and beautiful appearance are also needed by most car owners
Under the condition of cost control, the brake with better performance than the original factory can be installed in the existing wheel hub size (ig
Four pistons are not necessarily worse than six pistons
The model of the caliper depends on the model and the output power of the brake master cylinder
After determining the brand, try to choose new brakes. After the old ones enter the market for a certain period, new products will replace them
Professional installation of brake discs and brake pads
To prevent problems, the brake disc / brake pad change should only be carried out by trained personnel. Fundamentally, the following must be observed:
Brake discs
Only change them for the complete axle, if necessary observe the direction of run.
Centre properly and mount with the specified torque in the correct order. Important: Test the axial run-out.
With the replacement of the brake disc, also use new brake pads or other authorized brake pads (ECE R90 approval).
Wheel hub
Contact surface must be bare (no rust or dirt it may be present).
Do not apply any grease or similar products. A thin layer of oilspray can be applied for an easier dismantling.
Contact surface and centring may not be damaged.
Contact surface must be level (hub imbalances cause axial run-out!).
Brake pads
Use our brake pads or other authorized pads.
Select the appropriate pads according to the vehicle type / year of make.
Run-in the brakes in a professional manner, avoiding violent braking.
Brake calliper
Check the protective caps for damage and replace if necessary. Check the pistons and guide elements for damages and proper function, and replace if necessary.
Ensure the smooth running of the new pads in the calliper slot.
Wheel suspension
Wishbone suspension arms and stabilizer rubber bushings may not be worn out, if necessary replace.
Check the shock absorbers and replace if necessary.
Check the front axle settings according to manufacturer's specifications and adjust if necessary.
Wheel bearings
Check the clearance and adjust or secure accordingly if necessary.
Steering parts
Check the steering clearance and adjust if necessary.
Check the steering track rods and steering dampers for damages and proper function, and replace if necessary.
Wheels / tires
Check for unbalance and balance if necessary.
Testing of the vertical and lateral run-out, axial and radial run of the rim, and maintaining of the specifications.
Full set brake system
| 2pcs brake caliper |
| 2pcs brake disc |
| 2pcs brake hose |
| 2pcs aluminum center bell |
| 2pcs aluminum bracket |
| 2pcs brake hose |
| 4 pcs brake pads |
Company Details
Business Type:
Manufacturer,Trading Company,Seller
Year Established:
2017
Total Annual:
1000000-5000000
Employee Number:
50~100
Ecer Certification：
Active Member
Guangzhou Yuanxing Industrial Co.Ltd was established in 2017 and is located in Room 302, building 5, No. 7, Laowu street, Dongping village, Yongping street, Baiyun District, Guangzhou ,China. The location is very excellent and the transportation is convenient. We have very rich industry experience a... Guangzhou Yuanxing Industrial Co.Ltd was established in 2017 and is located in Room 302, building 5, No. 7, Laowu street, Dongping village, Yongping street, Baiyun District, Guangzhou ,China. The location is very excellent and the transportation is convenient. We have very rich industry experience a...
Get in touch with us
Leave a Message, we will call you back quickly!