Guangdong Youhui Technology Co., Ltd.
| Delivery Time | 15 work days |
| Packaging Details | Each lamp in a cylinder .Then in a professional plywood box. |
| Product name | IR Lamp holder |
| Type | SC05 |
| Applicable | Twin tube medium wave infrared heater lamp |
| Material | Ceramic + aluminum |
| Color | Ceramic white + silver |
| Sizeplace of shipment | China,Guangdong |
| Brand Name | UVIR |
| Model Number | SC05 M-W |
| Certification | CE |
| Place of Origin | China |
View Detail Information
Explore similar products
18mm IR Lamp Holder Stainless Steel Clip Clamp For Infrared Heating
GJ0003L Twin Tube IR Lamp Holder 15x33mm Ceramic aluminum Material
10mm IR Lamp Holder , UVIR Stainless Steel Clips Clamps CE approval
white base Stainless Steel Lamp Holder for Medium wave IR lamps 10mm
Product Specification
| Delivery Time | 15 work days | Packaging Details | Each lamp in a cylinder .Then in a professional plywood box. |
| Product name | IR Lamp holder | Type | SC05 |
| Applicable | Twin tube medium wave infrared heater lamp | Material | Ceramic + aluminum |
| Color | Ceramic white + silver | Sizeplace of shipment | China,Guangdong |
| Brand Name | UVIR | Model Number | SC05 M-W |
| Certification | CE | Place of Origin | China |
| High Light | Aluminum IR Lamp Holder ，Ceramic IR Lamp Holder ，ISO9001 ceramic heat lamp holder | ||
Type SC05 lamp clips/IR lamp holder Clamps for medium wave twin lamps
Why choose us
1.Implement strict quality system according to ISO9001.
2. All product are tested one by one before delivery out from our factory.
3. Punctual delivery time, samples order delivery within 5 working days, bulk order delivery within 25 days.
4. Dependable after sales service
5. ODM and OEM service.
6. Low MOQ limitation
7. 7*24service, any of your questions will be replied within 24 hours.
Product information
| Product name | IR lamp holder for medium wave twin tube |
| Type | SC05 lamp clip |
| Color | Ceramic white + silver |
| Material | Ceramic + aluminum |
| Application area | Infrared Heat Lamp |
| MOQ | 100pcs. |
CLAMPS FOR MEDIUM WAVE TWIN LAMPS
| Twin Tube Cross- Section | a | b | c | d | e | M | UVIR NO. |
| 10 | 23 | 25 | 20 | 10 | M5 x 20 | GJ0002L |
| 15 | 33 | 30 | 25 | 15 | M5 x 25 | GJ0003L |
| 8 | 18 | 25 | 25 | 10 | M5 x 20 | GJ0001L |
Product Details
Operating Instructions
The infrared twin-tube emitter is suited for horizontal operation only. Special IR emitters for vertical installation positions are specially manufactured and marked as such.
To install our IR emitters, usually one mounting and one spring clamp, and if necessary, one or several central supports all manufactured by HNI are to be used.The IR twin-tube emitter must be secured in position of a stable support(steel support plate: > 1.5 mm).
The IR emitter(s) must be assembled in the following order:
1. Drill mounting holes with Φ9.2 mm for clamp.Spring in the support (mounting plate)at distance L.
2.Screw the clamp spring in place with ceramic washers (1) on the mounting plate (4).
3.Press the IR emitter into position in the retaining spring clip. The emitter must point at all the surface to be heated. The gold reflector should be pointing towards the support plate.
4.Tighten the fastening nuts (2) on the knurled nut (3).
Pulling the lead wire must not cause any tension on the press seal. Bending radius of lead wire: > 30 mm
Mounting dimensions:
L = Overall length of emitter LG:2x35 mm (two-sided connection) or
L = Overall length of emitter LG:35 mm -20 mm (one- sided connection)
If the following overall emitter lengths are exceeded for LG, a central support is necessary:
Tube dimensions:23 x 11, LG >1 500 mm and tube dimensions 34x14, LG > 2000 mm
After installation, the quartz glass tube of the IR emitter must be cleaned on the side without gold plating. For this purpose, please use the cleaning cloth included in our delivery or a clean linen cloth (without textile finishing agents) soaked in methylated spirit (such as rubbing alcohol) to remove any impurities/soiling or fingerprints from the surface.
Other Product
Size & Fit Issues
The sizes are illustrated with specific measurements in the detailed specifi- cations,please check the specifications before you place orders. If you find the size of products do not fit you,you can directly contact us.
FAQ
Q1. Can I have a sample order?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 5-7 days, about 30 days for mass production.
Q3. Do you have any MOQ limit?
A: Usually MOQ is 100pcs for each model.
Q4. How do you ship the goods?
A: We usually ship by DHL, UPS, FedEx or TNT for sample. Airline and sea shipping for large quantity
Q5. How to proceed an order?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Exporter,Seller,Other
Year Established:
2003
Total Annual:
100-200
Employee Number:
30~50
Ecer Certification：
Verified Supplier
After Sales Service Package tracking Technical support 24 hours working time Discount for reorder Replacements for quality problems Confidentiality of customer information OEM Service We can advise the customer choosing the right... After Sales Service Package tracking Technical support 24 hours working time Discount for reorder Replacements for quality problems Confidentiality of customer information OEM Service We can advise the customer choosing the right...
Get in touch with us
Leave a Message, we will call you back quickly!