Guangzhou Shice Equipment Co., Ltd.
| Payment Terms | T/T, Western Union, MoneyGram, L/C |
| Supply Ability | 999 pieces per month |
| Delivery Time | in 15 work days |
| Packaging Details | Wooden Carton |
| Name | Torque Balance Test Apparatus |
| Standard | IEC60884, VDE0620, IEC60598, IEC60065 Fig11 |
| weight | 2.5N*1, 1N*1 |
| Plug | UL plug*1, European plug*1,all-purpose plug*1 |
| The distance from the contact surface and the Axis of the surface | 8mm |
| Arm of force | 0-200mm |
| Brand Name | SHC |
| Model Number | SC-CRLS |
| Certification | CNAS、TUV、ITS、CSA、BV、SGS (cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60884 Fig13 Lateral Strain Resistance Checking Device
IEC60884 Fig28 Plug Socket Tester Insulating Sleeves Abrasion Test Apparatus
BS1363 Fig8 Plug Pin Deflection Test Apparatus For Resilient Plug
EU Standard Plug Socket Tester EN50075 Gauge And Apparatus
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram, L/C | Supply Ability | 999 pieces per month |
| Delivery Time | in 15 work days | Packaging Details | Wooden Carton |
| Name | Torque Balance Test Apparatus | Standard | IEC60884, VDE0620, IEC60598, IEC60065 Fig11 |
| weight | 2.5N*1, 1N*1 | Plug | UL plug*1, European plug*1,all-purpose plug*1 |
| The distance from the contact surface and the Axis of the surface | 8mm | Arm of force | 0-200mm |
| Brand Name | SHC | Model Number | SC-CRLS |
| Certification | CNAS、TUV、ITS、CSA、BV、SGS (cost additional) | Place of Origin | China |
| High Light | IEC60884 Plug Socket Tester ，200mm Plug Socket Tester ，Torque Balance Test Apparatus | ||
IEC60065 Figure 11 Socket Outlet Torque Balance Test Apparatus
Technical parameters:
| weight | 2.5N*1, 1N*1 |
| Plug | UL plug*1, European plug*1,all-purpose plug*1 |
| Conforms to standard | IEC60884,VDE0620,IEC60598,IEC60065Fig11 |
| Arm of force | 0-200mm |
| The distance from the contact surface and the Axis of the surface | 8mm |
Product information:
The plug torque tester conforms to the standard of IEC60065 figure 11.
It is used for checking whether the mechanical stress which occurs when the Direct Plug-in Equipment with plug pin normally insert into the socket is in the required range.
A device provided with pins intended to be introduced into fixed socket-outlets shall not impose undue strain on these socket-outlets.
The balancing arm of the test apparatus pivots about a horizontal axis through the centre lines of the contact tubes of the socket-outlet at a distance of 8 mm behind the engagement face of the socket-outlet.
With the device not in engagement, the balancing arm is in equilibrium, the engagement face of the socket-outlet being in the vertical position.
After the device has been engaged, the torque to be applied to the socket-outlet to maintain its engagement face in the vertical plane is determined by the position of a weight on the balancing arm.
The torque shall not exceed 0.25 Nm.
Structure
1 – balance weight
2 – measuring bubble
3 – level bubble
4 – measuring weight
5 – height regulation screw
6 – support rod
Testing steps
Remove the 4 - measuring weight, adjust the 1 – balance weight position, keep the balance arm in horizontal position. And make the balance arm keep a distance about 1mm to the 6 - support rod.
Install the test sample on device, tighten the screw. Now the balance arm up.
Hang the 4 - measuring weight on balance arm. Adjust the position of 4 - measuring weight, record the position where make the balance arm level, air bubble of 2 – measuring bubble in center position, balance arm keep 1mm distance to 6 - support rod. Say the position located at 10.3cm.
Torque measurement
(1) The appropriate weight is hung on the lower scale.
(2) Move the weight slowly until the balance arm is in a horizontal state.
Torque of the sample applied to the socket: Scale value X weight
For example:Torque:0.12mX2.5N=0.3Nm
Company Details
Business Type:
Manufacturer
Year Established:
2016
Total Annual:
1000000-3000000
Employee Number:
>100
Ecer Certification：
Active Member
Guangzhou Shice Equipment Co., Ltd. (hereinafter referred to as Guangzhou Shice) is the one professional focus on IEC testing equipments, IP waterproof testing equipments, electronic testing products and other testing products. Guangzhou Shice is professionally dedicated in providing laboratory test... Guangzhou Shice Equipment Co., Ltd. (hereinafter referred to as Guangzhou Shice) is the one professional focus on IEC testing equipments, IP waterproof testing equipments, electronic testing products and other testing products. Guangzhou Shice is professionally dedicated in providing laboratory test...
Get in touch with us
Leave a Message, we will call you back quickly!