Automatically changed PET packaging strapping machine Single Or Twin Strap

Product Specification

High strength Automatically changed PET Flake As Raw Material Single Or Twin Strap Production Line

1. Introduction of Product
Our PET strap production line, which has broken through the traditional craft route,
takes 100% bottle slices for raw materials without any other complement, adopts
the advance technology to produce all kinds of polyester straps directly in
a economical cost. 
 
2. Quick Detail:
PET Strap Production Line consists of LDAS,calender ,extrusion tool,chilled-water storage,stretcher,Tension setting machine winding machine and other machine
 
 
3. Description:

1) PET raw materials do not need dry and water treatment separately. There is
an automatic circulation on preheating and drying, which saves lots of
equipment investment and reduces the production cost by 30%
2) Uses the recycling bottle slices as raw materials directly, which reduces the
course of raw material-making 
3) With the multi-purpose machine, it can produce PET straps in different
specifications directly and doesn't need to change the mould head
4) The products has the same transparency as made from new polyester slices,
but the tensile strength and shock resistance are stronger
5) Low energy consumption, high production capability
6) Easy to operate, saves manpower: 2 people for one production line on 
average.
(pet strap production line,plastic strap production line,polyester strap production

line,pet strap machine,pet strap machinery,polyester strap machinery,plastic strap

4. Applications:
PET Strap Production Line is made of polyethylene glycol terephthalate and other material which is a new kind of eco-friendly packing material that take the place of Steel Strip. Through the development of new material , the cost of it goes down rapidly. Now PET Strap Production Line is used a lot in the steel industry, chemical fiber industry, aluminum industry, paper brick, ceramics, screw industry, the tobacco industry, electronics industry, textile industry and wood industry, etc. it is the new  high strength  Straps and widly used around the world which take the place of Steel Strip.      
 
5. Specifications:

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
6. Competitive Advantage:

1) Raw material is dried via the CSG series drying system which is made by our company, its minus fourty degree centigrade dew point make the moisture content of the raw material no more than 40PPM possible, what’s more, it is useful for the solid phase condensation and increase sticks to the raw material;

2) After the dry system, raw material adopts the closed cycle expulsion system, no contact with the air outside, to assure the dry effect of the raw material;

3)The extruder adopts the PET special screw, the screw’s unique separation and mixing ability enable the material even plasticizing; Dosing and steady extrusion assure even length and width of the strap.

4) The mould is self designed, different standards are made to the mold; Leakage of the material is eliminated after the improvement of the melt exchanger.

5) Static casting machine replaces the early water trough to cool the facility, casting piece is cooled under the certain constant temperature, which improves the molecular longitudinal orientation, and increases the end product longitudinal strength;

6) Calefactive anneal treatment is made after the shape of the strap, to remove the stress left after the strech, this stabilizes the molecular orientation, alleviates the phenomenon/matter of depositing metamorphism;
    7) Fetching adopts double-stage winder, easy to operate.
 
7. Service:
 
1. Oversea installation guide.
2. Oversea test running
3. Ovsersea worker training
4. Technical support
5. Spare parts supply
6. Technical operation support
7. Formula and processing support
 
8. Option
This set of equipment is mainly composed of automatic feeding machine, drying machine (or dehumidification drying device), extruder, filters, die, sink, tractor unit, oven, stretching, heat setting, winding machines and other equipment.

9. Commercial Terms
1. Payment: 30% by T/T as advance payment, balance(70%) by T/T before shipment
2. Lead Time: 60 days after receiving the advance payment
3. Transportation: container, simple package ( PE film, salver)
4.Warranty period: From the day of the use of the machine in the buyer’s factory:
   (1) The mechanical Parts: 12 months
   (2) The electrical Parts: 6 months
5. Installations and Commissioning
   (1) Up to date commissioning has been made before shipment
   (2) Overseas Commissioning and charges
   one or two technicians will be sent to the buyer to guide the installation and commissioning of the            equipment if the customer requests.
   Customers pay the charge of our technicians.
   (1) Round-trip Airplane Ticket
   (2) Charges of transportation, accommodation and communication
   (3) The allowance for the technicians is USD 80 per day for one person.
   (4) An interpreter is needed.
6. Spare parts:
    Spare parts for one year are needed for the customers, and we suggest that customers should buy       the spare parts. (Fittings list will be provided.)
7. English manual, Figuration drawing, and footing drawings are provided.