Sinotectronics Inc.
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 50000~100000pcs/Month |
| Delivery Time | 5-8 work days |
| Packaging Details | carton |
| Touch Point | 10 |
| Operating System | Android/ Linux/ Windows |
| Touch Technology | Pcap (projected capacitive) |
| Controller | ILI2511 |
| Channel | TX: 23 RX: 37 |
| Operating Temperature | -20~80 ℃ |
| Storage Temperature | -30~80 ℃ |
| USB Cable Length | 1 m |
| Brand Name | Master Touch |
| Model Number | MST-GG-TPB-10.1-ILI |
| Place of Origin | Suzhou, Jiangsu, China |
View Detail Information
Explore similar products
ODM 43 Inch USB Anti Reflective ITO GG Touch Panel With Thick Tempered Glass
TX23 RX31 10.4 Inch MST Capacitive GG Touch Panel 85% Transparency
10 Points GG RX78 TX44 Channel 32 Inch Touch Panel Black AG Surface
ILITEK IC GG 23.8 Inch ITO PCAP Touch Screen For Medical Field
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 50000~100000pcs/Month |
| Delivery Time | 5-8 work days | Packaging Details | carton |
| Touch Point | 10 | Operating System | Android/ Linux/ Windows |
| Touch Technology | Pcap (projected capacitive) | Controller | ILI2511 |
| Channel | TX: 23 RX: 37 | Operating Temperature | -20~80 ℃ |
| Storage Temperature | -30~80 ℃ | USB Cable Length | 1 m |
| Brand Name | Master Touch | Model Number | MST-GG-TPB-10.1-ILI |
| Place of Origin | Suzhou, Jiangsu, China | ||
| High Light | 10.1in ITO GG Touch Panel ，GG Touch Panel TX23 ，10.1 Inch Touch Panel RX37 Channel | ||
10.1 Inch Master Touch Windows/ Android/ Linux System ITO GG Touch Panel
1. Product Description
MST G + G Capacitive Touch Panel is made of a surface tempered glass and a ensor glass with Pcap technology. Capacitive touch panel works through body's current induction .When finger is on or close to touch panel surface,due to body electric field, the user and touch panel surface forms one coupling capacitance. For high frequency current, capacitance is direct conductor, then fingers suck a small current from the contact point, through amplifying and accurately calculating this current signal, the controller works out the touch point position.
2. Basic Features
| Item | Feature | Remarks |
| Controller | ILI2511 | - |
| Channel | TX: 23 RX: 37 | - |
| Power | 5V | USB: 4.7V ~ 6.0V, Typical:5V |
| Communication | USB | USB: 2.0 Full Speed |
| Number of Touch point | 10 | - |
| O.S. | Windows/ Android/ Linux | plug and play |
| Power Consumption | 1.Active Mode: Max.120mA @ USB Input 5V 2.Idle Mode: 90mA @ USB Input 5V 3.Sleep Mode: less than 1mA @ USB Input 5V | |
| Item | Specification | Unit |
| Viewing Area | 217.98(L)×136.6(W) | mm |
| Cover Lense O.D. | 254.96 (L)×173.6(W) |
4. Optical Characteristics
| Item | Specification | |
| Transparency | Viewing Area | ≧85% |
| Item | Specification | Unit | ||
| Stacked structure | Cover | 2.8 | mm | |
| LOCA | 0.2 | mm | ||
| ITO | 0.7 |
mm
| ||
| Sensor Glass | ||||
| ITO | ||||
| Sensor Dimension | OD Size | X | 227.5 | mm |
| Y | 149 | mm | ||
6. Drawing
7. Details
8. Cosmetic Inspection
The following standard only applies to the visual areas. If the TP function is good, the non-visual appearance may negotiate to relax the standard. W=Width L=length D=Diameter GT=Glass thickness. If soft cloth which dips in alcohol can wipe besmirch, it does not apply to this appearance standards.
Inspection methods and conditions:
1)Inspection environment: Temperature:20-22 ℃; Humidity: 65 + 10% RH;
2)Inspector qualifications: The appearance of product must be inspect by a good eyesight inspector.
3) Inspection methods: The distance between inspector and product should be 30±2cm and putting a lamp 12 to 20 watts of cold white fluorescent lamp in the observation station of product.
Pay attention to the following matters when inspection:
A.Inspectors must wear a fingerstall.
B.Put the product in front of inspector, hands hold the edge of products carefully and can’t make it bended.
C.Inspectors shouldn’t stare at a certain point but continue covered watching.
D.According to the following standards judge whether products conform to the requirement. If found other defect, from perspective of appearance consider whether customers accept this defect in end product.
9. FAQ
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2017
Total Annual:
>5
Employee Number:
50~100
Ecer Certification：
Active Member
Sinotectronics Inc., locates in Suzhou, Jiangsu Province, China, is a leading touch solution provider and interactive product developer. Sinotectronics business including: BTP (Big Touch Platform), provides various touch solutions including capacitive Micro Copper Wire Touch Foil, ITO ... Sinotectronics Inc., locates in Suzhou, Jiangsu Province, China, is a leading touch solution provider and interactive product developer. Sinotectronics business including: BTP (Big Touch Platform), provides various touch solutions including capacitive Micro Copper Wire Touch Foil, ITO ...
Get in touch with us
Leave a Message, we will call you back quickly!