Sinotectronics Inc.
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 50000~100000pcs/Month |
| Delivery Time | 5-8 work days |
| Packaging Details | carton |
| Touch Point | 10 |
| Operating System | Android/ Linux/ Windows |
| Touch Technology | Pcap (projected capacitive) |
| Controller | ILI2511 |
| Channel | TX: 23 RX: 31 |
| Operating Temperature | -20~80 ℃ |
| Storage Temperature | -30~80 ℃ |
| USB Cable Length | 1 m |
| Communication | USB |
| Brand Name | Master Touch |
| Model Number | MST-GG-TPB-10.4-ILI |
| Place of Origin | Suzhou, Jiangsu, China |
View Detail Information
Explore similar products
ODM 43 Inch USB Anti Reflective ITO GG Touch Panel With Thick Tempered Glass
10.1 Inch Windows Android Linux ITO GG Touch Panel TX23 RX37 Channel
10 Points GG RX78 TX44 Channel 32 Inch Touch Panel Black AG Surface
ILITEK IC GG 23.8 Inch ITO PCAP Touch Screen For Medical Field
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 50000~100000pcs/Month |
| Delivery Time | 5-8 work days | Packaging Details | carton |
| Touch Point | 10 | Operating System | Android/ Linux/ Windows |
| Touch Technology | Pcap (projected capacitive) | Controller | ILI2511 |
| Channel | TX: 23 RX: 31 | Operating Temperature | -20~80 ℃ |
| Storage Temperature | -30~80 ℃ | USB Cable Length | 1 m |
| Communication | USB | Brand Name | Master Touch |
| Model Number | MST-GG-TPB-10.4-ILI | Place of Origin | Suzhou, Jiangsu, China |
| High Light | GG Touch Panel 85% Transparency ，TX23 GG Touch Panel ，RX31 10.4 inch touch screen Panel | ||
10.4 Inch 10 Touch Points MST Capacitive GG Touch Panel with 85% Transparency
1. Product Description
MST G + G Capacitive Touch Panel is made of a surface tempered glass and a ensor glass with Pcap technology. Capacitive touch panel works through body's current induction .When finger is on or close to touch panel surface,due to body electric field, the user and touch panel surface forms one coupling capacitance. For high frequency current, capacitance is direct conductor, then fingers suck a small current from the contact point, through amplifying and accurately calculating this current signal, the controller works out the touch point position.
2. Basic Features
| Item | Feature | Remarks |
| Controller | ILI2511 | - |
| Channel | TX: 23 RX: 31 | - |
| Power | 5V | USB: 4.7V ~ 6.0V, Typical:5V |
| Communication | USB | USB: 2.0 Full Speed |
| Number of Touch point | 10 | - |
| O.S. | Windows/ Android/ Linux | plug and play |
| Power Consumption | 1.Active Mode: Max.120mA @ USB Input 5V 2.Idle Mode: 90mA @ USB Input 5V 3.Sleep Mode: less than 1mA @ USB Input 5V | |
| Item | Specification | Unit |
| Viewing Area | 211(L)×158.4(W) | mm |
| Cover Lense O.D. | 259.2(L)×206.4(W) |
4. Optical Characteristics
| Item | Specification | |
| Transparency | Viewing Area | ≧85% |
| Item | Specification | Unit | ||
| Stacked structure | Cover | 1.1 | mm | |
| LOCA | 0.2 | mm | ||
| ITO | 0.7 |
mm
| ||
| Sensor Glass | ||||
| ITO | ||||
| Sensor Dimension | OD Size | X | 228 | mm |
| Y | 173.43 | mm | ||
6. Drawing
7. Details
8. Related Test
| Item | Specification | Result | |
| Cover lens | Ball Drop | 200g ± 2g 35cm | One drop test on each of the 5 selected points, No damage |
| Hardness | Pencil: 6H Pressure: 1N/45° | Hardness ≧ 6H | |
| Warpage | By Gauge | Warpage 0.1% ≦ Length * | |
| FPC/COF | Bending | Bending range0-180° 30times Electrical Function ok | - |
9. Reliablility Test
| Reliability test report | ||||
| Objects | □Raw material □New production process □Abnormal item □New product □Finished product □Sample □Experiment procedure and method □Others □Production line program | |||
| Purpose: to verify the applicability of the experimental product when being stored,transported and used under the extreme environmental conditions. | ||||
| Experiment requirements:
| ||||
| No. | Items | Test condition | Criterion | |
| 1 | High temperature and humidity test | 1. Temperature: 60℃ 2. Humidity: 90%RH 3. Time: finished product 120H | Appearance test refer tostandard OK Function detection OK | |
| 2 | Temperature Switching impact test | 1.High temperature 2.Low temperature 3. 30 times in cycle | Appearance test refer tostandard OK Function detection OK | |
| 3 | Salt spray test | 1.Concentration: 5% NaCl solution 2.Temperature: 35℃ 3.Time: finished product 48H | Appearance test refer tostandard OK Function detection OK | |
| 4 | High temperature storage test | 1.Temperature: 80℃ 2.Time: 120H | Appearance test refer tostandard OK Function detection OK | |
| 5 | Low temperature storage test | 1.Temperature: -30℃ 2.Time: 120H | Appearance test refer tostandard OK Function detection OK | |
| 6 | Red ink test | 1. Room temperature 2. Time: 8H | 1. No ink infiltration 2. All functions are good | |
| 7 | Hand sweat test | 1. Sweat PH=4.7 2. Time: 48H | Appearance test refer tostandard OK Function detection OK | |
| 8 | Static electricity test | 1. Air discharge: 8KV 2. Contact discharge: 6KV 3.Times: 10 times for each point | Appearance test refer tostandard OK Function detection OK | |
10. FAQ
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2017
Total Annual:
>5
Employee Number:
50~100
Ecer Certification：
Active Member
Sinotectronics Inc., locates in Suzhou, Jiangsu Province, China, is a leading touch solution provider and interactive product developer. Sinotectronics business including: BTP (Big Touch Platform), provides various touch solutions including capacitive Micro Copper Wire Touch Foil, ITO ... Sinotectronics Inc., locates in Suzhou, Jiangsu Province, China, is a leading touch solution provider and interactive product developer. Sinotectronics business including: BTP (Big Touch Platform), provides various touch solutions including capacitive Micro Copper Wire Touch Foil, ITO ...
Get in touch with us
Leave a Message, we will call you back quickly!