Sinotectronics Inc.
| Payment Terms | L/C, T/T, Western Union |
| Supply Ability | 50000~100000 pieces/Month |
| Delivery Time | 5-8 days |
| Packaging Details | carton |
| LCD Model | DV150X0M-N10 |
| Size | 15 inch |
| Touch IC | EETI80W46 |
| Resolution | 1024(RGB)×768 [XGA] 85PPI |
| Luminance | 350 (Typ.) |
| TFT thickness | 10mm |
| TP thickness | 4.3mm |
| Total thickness | 15.3mm |
| Brand Name | Master Touch |
| Model Number | MST-TMS-15-DV |
| Place of Origin | Suzhou, Jiangsu, China |
View Detail Information
Explore similar products
15 Inch TFT LCD Frame Bonding Touch Screen Module Simply Use
Sticking Capacitive Touch Screen Module 19 Inch Master Touch Frame
Oral Adhesive Sticking LVDS Interface Touch Screen Display 17 Inch
Controllable Bonding Area OCA Full Lamination Touch Screen Module
Product Specification
| Payment Terms | L/C, T/T, Western Union | Supply Ability | 50000~100000 pieces/Month |
| Delivery Time | 5-8 days | Packaging Details | carton |
| LCD Model | DV150X0M-N10 | Size | 15 inch |
| Touch IC | EETI80W46 | Resolution | 1024(RGB)×768 [XGA] 85PPI |
| Luminance | 350 (Typ.) | TFT thickness | 10mm |
| TP thickness | 4.3mm | Total thickness | 15.3mm |
| Brand Name | Master Touch | Model Number | MST-TMS-15-DV |
| Place of Origin | Suzhou, Jiangsu, China | ||
| High Light | 15 Inch Touch Panel Assembly ，60Hz Touch Panel Assembly ，1024*768px Multi Touch Panel | ||
Master Touch Multi Touch 15 Inch USB Interface Tape Bonding Touch Panel Assembly
1. Product Description
Master Touch 15 inch Touch Panel+LCM (Tape Bonding) is the lamination of touch panel and the LCD module. That is, simply use glue to laminate the touch screen and the four sides of the LCD screen, so there will be an air layer between them. The TP assembly attached by the frame bonding technology is thick, and the dust and water vapor are easy to enter the gap between the touch panel and the display. In addition, this type of lamination will make light reflection on screen obvious, so the display effect is much worse than that of optical bonding. But the advantage is that the lamination is simpler, the process is more mature, the yield is more stable, and the cost is lower.
2. Genaral Specification
2.1 LCD
| Model | DV150X0M-N10 |
| Size | 15 inch |
| Resolution | 1024(RGB)×768 [XGA] 85PPI |
| Luminance | 350 (Typ.) |
| Contrast | 1000 : 1 (Typ.) |
| Viewing Angles | 89/89/89/89 (Typ.)(CR≥10) |
| Signal System | LVDS (1 ch, 8-bit) , terminal , 20 pins |
| Operating frequency | 60Hz |
| Driving Voltage | 3.3 V (Typ.) |
| TFT thickness | 10mm |
2.2 Touch Panel
| Outline Dimension | 326.5*253.5 | mm |
| View Area | 305.13*229.1 (15 inch) | mm |
| TP thickness | 4.3 | mm |
| Total | 15.3 | mm |
| Touch IC | EETI80W46 | -- |
| Number of touchpoint | 10 | points |
| Number of button | -- | - |
| Interface information driven plate | USB | - |
| The active information | -- | -- |
| The type of Bonding with LCD | Frame bonding | |
| Operation Temperature | -20℃~70℃ | ℃ |
| Storage (cannot exceed 6 months) | Temperature: 23±3℃ (Before installation) Humidity:40%~70%RH | ℃ |
| Temperature: -30~80℃ (After installation) | ℃ |
| Item | Content |
| Transparency | 85±10% |
2.4 Electrical Spec.
| ESD Touch Side (Touch) | 4kv |
| ESD Touch Side (Air) | 8kv |
3. Reliability
| Item | Specifications | Remark |
| High Temperature Operation | 70ºC, 48hrs | -- |
| Low Temperature Operation | -20 ºC, 48hrs | Non-condensing |
| Operating Temperature/ Humidity | 60ºC/90%RH, 500hrs | Non-condensing |
| Thermal Shock | -30 ~ 80℃, 60 mins/cycle, total 48 cycles | -- |
4. Drawing
5. Details
6. Inspection
Equipment/materials: light box, ion fan, humidifier, film card, alcohol/ethyl acetate, finger cover, dust-free cloth, Vernier/digital caliper.
Inspection environment: 30cm ± 5cm from the product, temperature: 22 ± 2 ℃; humidity: 40% ~ 70% RH; cleanliness: Level 10000.
Inspection angle: vertical rotation angle: ± 30 °, from top to bottom; horizontal rotation angle: ± 30 °, from left to right.
Inspection illuminance: fluorescent lamp inspection area illuminance: 150
0-1800lux; table lamp inspection area illuminance: 1500-1800lux; It is convenient for internal uniform illumination requirements.
Background color: Black/white.
Inspection time: the inspection time of one piece of product shall not exceed 15 seconds.
7. FAQ
Company Details
Business Type:
Manufacturer,Trading Company
Year Established:
2017
Total Annual:
>5
Employee Number:
50~100
Ecer Certification：
Active Member
Sinotectronics Inc., locates in Suzhou, Jiangsu Province, China, is a leading touch solution provider and interactive product developer. Sinotectronics business including: BTP (Big Touch Platform), provides various touch solutions including capacitive Micro Copper Wire Touch Foil, ITO ... Sinotectronics Inc., locates in Suzhou, Jiangsu Province, China, is a leading touch solution provider and interactive product developer. Sinotectronics business including: BTP (Big Touch Platform), provides various touch solutions including capacitive Micro Copper Wire Touch Foil, ITO ...
Get in touch with us
Leave a Message, we will call you back quickly!