Nuvoton 32 Bit Microcontroller M058ldn Lqfp48 Micro Controller Unit Arm Cortex

Product Specification

Nuvoton 32 Bit Microcontroller M058ldn Lqfp48 Micro Controller Unit Arm Cortex M0 Microcontroller

The NuMicro™ M058S is a 32-bit microcontroller with embedded ARM® Cortex®-M0 core for industrial control and applications which need rich communication interfaces. The Cortex®-M0 is ARM embedded processor with 32-bit performance and cost-effective microcontroller.

The NuMicro™ M058S can run up to 50 MHz. Thus it can afford to support a variety of industrial control and applications which need high CPU performance. The NuMicro™ M058S has 32 KB flash, 4 KB data flash, 4 KB flash for the ISP, and 4 KB SRAM.

Many system level peripheral functions, such as I/O Port, Timer, UART, SPI, I2C, PWM, ADC, Watchdog Timer, and Brown-Out Detector, have been incorporated into the NuMicro™ M058S in order to reduce component count, board space and system cost. These useful functions make the NuMicro™ M058S powerful for a wide range of applications.

Additionally, the NuMicro™ M058S is equipped with IAP (In-Application Programming), ISP (In-System Programming) and ICP (In-Circuit Programming) functions, which allow the user to update the program memory without removing the chip from the actual end product.

Specifications

Description 

- Kernel
- ARM®Cortex®
-M0 core runs up to 50MHz.
- A 24-bit system timer.
-Support low-power sleep mode.
-Single instruction cycle 32-bit hardware multiplier.
- The nested vectored interrupt controller NVIC supports 32 interrupt inputs, and each interrupt has 4 priority levels.
- Supports serial debugging (SWD) interface, 2 observation points/4 breakpoints.
- Provides hardware divider, supporting signed 32-bit dividend and 16-bit divisor
- Wide voltage range: 2.5V~5.5V
- Memory
- 8KB/16KB/32KB/64KB Flash is used to store user programs (APROM)
- 4KB Flash is used to store data (DataFlash)
- 4KB Flash is used to store ISP boot code (LDROM)
- 4KB byte SRAM is used as internal scratchpad memory (SRAM)
- Clock control
- Programmable system clock source
-22.1184MHz internal high-speed oscillator
- 4~24 MHz external high-speed crystal oscillator input
- Low-power 10KHz low-speed oscillator is used for watchdog and sleep mode to wake up the CPU
- PLL supports CPU running up to 50MHz
- I/O port
- In LQFP-48-pin package, supports up to 40 general-purpose I/O ports (GPIO)
- 4 I/O working modes:
- Quasi-bidirectional mode
- Push-pull output mode
- Open drain output mode
- High impedance input mode
- TTL input or Schmitt trigger input can be selected
- I/O pins can be configured as interrupt sources in edge/level triggered mode
- Strong current driving capability and sinking current withstanding capability
- Timer
- 4 groups of 32-bit timers, each group of timers has a 24-bit up-counter and 8-bit prescaler
- Each timer has an independent clock source

Features                                                                                                               

NuMicro™ M051 DN/DE series is based on ARM® Cortex®
-M0 is a core 32-bit microcontroller, used in industrial control and applications that require abundant
The domain of rich communication interfaces. NuMicro™ M051 DN/DE series includes M052xDN/xDE, M054xDN/xDE, M058xDN/xDE
and M0516/xDN/xDE.
NuMicro™ M051 DN/DE series operates at a frequency up to 50MHz, with an operating voltage of 2.5V ~ 5.5V and an operating temperature of -40℃ ~
85℃, M05xxDE is as high as 105℃ (-40℃ ~ 105℃), so the M051 series can be used in a variety of industrial controls and needs
Areas that require high performance CPU. NuMicro™ M051 DN/DE series has embedded 8K/16K/32K/64K-byte flash memory, 4K bytes
Data flash memory, 4K-byte in-system programming (ISP) flash memory, and 4K-byte SRAM memory.
Many system level peripheral functions such as I/O ports, EBI (External Bus Interface), Timer, UART, SPI, I2C, PWM, ADC, etc.
Watchdog timer, window watchdog, analog comparator and undervoltage detection have been integrated in the NuMicro™ M051 DN/DE series to
Reduce the number of system peripheral components, saving board space and system cost. These features make the NuMicro™ M051 DN/DE series suitable for
widely used.
In addition, the NuMicro™ M051 DN/DE series comes with ISP (In-System Programming) and ICP (In-Circuit Programming) functions, as well as IAP (In-Application Programming)
In-use programming) allows users to upgrade the program memory directly on the circuit board without removing the chip.

Frequently Asked Questions                                                                               

Shipping:

1, We can shipping all over the world by DHL, UPS, FEdex, TNT and EMS.The packaging is very

safe and strong. Please nitfy me you have any special needs
2, It will take around 3-5 days to reach your hands.

Product Type & condition:

Because of the fluctuant sales situation. the stock parts are always changing and the stock list cannot

be, promptly updated.So please consult the stock situation when you inquire.

Buyer Reading:

1. Please confirm receipt of products if the items you received,and if the goods was damaged please

contact us immediately. send the photo to us that we can check and give you best solution

2. We only guarantee delivery in time but we couldn't control the express delivery time. Our related

sales person will be responsible to send the AWB for the delivered goods in the next workday.

you can check the AWB in the website which we send to you. For the AWByou also can call to the

local branch of the express company in your company.

Pre-sales service :

1. Our team design and make solutions based on different requirements from different customers.

2. We provide 24-hours service,and every message you quote inquiry will be replied within12 hours

on different requirements from different customers.

2. We provide 24-hours service,and every message you quote inquiry will be replied within 12 hours