Sun On Plastic Moulding Limited
| Payment Terms | T/T |
| Supply Ability | More than 1 million |
| Delivery Time | 30day |
| Packaging Details | As the customer required |
| Emphasize | The Cause And Countermeasure Of Product Leaving Marks |
| Place of Origin | CHINA |
| Brand Name | OEM |
| Certification | ISO |
View Detail Information
Explore similar products
OEM Injection Molding Solution Regular Daily Maintenance
Plastic Manufacturing Made Easy with Smooth Surface Finish Injection Molding
Achieve Optimal Mold Temperature with Injection Molding Solution
Smooth Surface Finish Injection Molding System with Short Lead Time
Product Specification
| Payment Terms | T/T | Supply Ability | More than 1 million |
| Delivery Time | 30day | Packaging Details | As the customer required |
| Emphasize | The Cause And Countermeasure Of Product Leaving Marks | Place of Origin | CHINA |
| Brand Name | OEM | Certification | ISO |
| High Light | typical injection molding defects analysis and solutions ，OEM hot runner solutions ，hot runner solutions OEM | ||
The Cause And Countermeasure Of Product Leaving Marks
Current Ripple
When the material in the mold is solidified and the molten material after the flow is mixed, such as Mi is not fully integrated, there will be dim and scaly in the product. Iridescent or ring shaped, this phenomenon is the flow mark, usually occurs at a slow speed
| Cause | Cuntermeasure | |
| Forming condition |
1. The material overflow degree is too low, and the front section is very easy to cure 2. Mold temperature is too low 3. The speed of chaos molding is too fast or too slow, which will produce ripple flow marks when it is too slow and jagged flow marks when it is too fast 4. The filling pressure or holding pressure is too low, so that the flow mark is clear show |
1. Increase the molding temperature 2. Increase die temperature 3. Set the right speed 4. Increase filling and retaining pressure
|
| Die |
1. The gate is too small 2. No cold feed well 3. Improper pouring U position
|
1.F pour n 2. Open more cold feed Wells. 3. If pouring U is not fixed, the material will also touch the position of trapping mold hole wall |
| Product Design |
1. Product structure design makes more right angles 2. The product is broken and the thickness difference is too large |
1. Improve product shape and smooth molten material flow 2. Change the design to make the thickness too smooth |
| Material |
1. Poor liquidity of materials 2. Too much filler
|
1. Improve liquidity 2. Switch to materials with fewer fillers |
| Other | Blockage of suona on injection molding machine |
Clean the nozzle of the machine
|
Company Details
Business Type:
Manufacturer
Year Established:
1997
Total Annual:
18000000-22000000
Employee Number:
1~1000
Ecer Certification：
Site Member
Sun On was founded in 1997. After years of development, we gradually bloomed into a diversified manufacturing factory, with Product Design, Rapid Prototype, Molds Making, Plastic Injection Production, Die Casting Alloy Production and Precision Parts Machining. together with surface fini... Sun On was founded in 1997. After years of development, we gradually bloomed into a diversified manufacturing factory, with Product Design, Rapid Prototype, Molds Making, Plastic Injection Production, Die Casting Alloy Production and Precision Parts Machining. together with surface fini...
Get in touch with us
Leave a Message, we will call you back quickly!