8662 Two component PU structural adhesive , polyurethane adhesive , structural

Product Specification

Part 1 Chemical product and company identification

Product name: 8662 Two-component PU Structural Adhesive.

Application: Self-adhesion or mutual adhesion of metal, aluminum and aluminum honeycomb, PU, wood, foam insulation materials, ceramics, cement, glass and fiberglass.

Company name: Hubei Huitian New Material Co., LTD

Address: No. 7 Hangtian Road, Xiangyang City, Hubei Province

Tel: (86) 710 3626888

Fax: (86) 710 3820881

Emergency No.: 86 710 3826888

Part 2 Composition/information on ingredients

Chemical name CAS Content%

A component

Polyol (Caster Oil) 8001-79-4 30-50

Calcium Carbonate 471-34-1 40-60

Chemical name CAS Content%

B component

PAPI 101-68-8 90-100

Part 3 Hazards summarizing

A component:

Contact method: skin contact, inhalation, eye contact

Health hazard: Not available

Environment hazards: Not available

Fire hazard: flammable

B component:

Contact method: skin contact, inhalation, eye contact, swallowing

Health hazard:

Acute intoxication

1. Inhalation of MDI vapor may cause irritation to respiratory tract and lead to headache, rhinorrhea, pharyngodynia, asthma, chest distress, dyspnea, lung function decline. Contact of high concentration vapor may cause bronchitis, bronchospasm, and pulmonary edema

2. Skin contact may cause irritation to skin, allergy and dermatitis.

3. Swallowing may cause abdominal spasm and emesis

Chronic intoxication

Long time exposure may cause permanent lung function decline, skin rash and anaphylaxis

Environment hazards: may cause water body, soil and air pollution

Fire hazard: flammable at high temperature or when exposed to naked flames.

Part 4 First aid measures

A component:

Skin contact: Take off the contaminated clothing, flush skin with plenty of water for at least fifteen minutes.

Eye contact: Hold the eyes open, wash with plenty of water for at least fifteen minutes and seek for the medical aid.

Inhalation: Take the person into the fresh air. If there is difficulty in breathing, seek for medical aid

Swallowing: Rinse the mouth and drink milk or egg white.

B component:

Skin contact: Take off the contaminated clothing, flush skin with plenty of water for at least fifteen minutes (use soap if possible), if symptom happens, seek for the medical aid.

Eye contact: Hold the eyes open, wash with plenty of water for at least fifteen minutes and seek for the medical aid

Inhalation: Take the person into the fresh air. If there is difficulty in breathing, seek for the medical aid.

Swallowing: Drink warm water and DO NOT induce the patient to vomit. If the patient is unconscious or has spasm, do not drink anything. Seek for medical aid immediately

Part 5 Fire precautions

Fire hazard: Flammable at high temperature or when exposed to naked flames.

Hazardous combustion products: Carbon monoxide, Carbon dioxide, oxynitride

Fire extinguishing media: Use water spray, foam, carbon dioxide and extinguishing powder

Fire-fighting method: Cool endangered containers with water spray jet. Remove the containers from fire to open place if possible.

Part 6 Accidental release measures

A component:

Personal protection: Wear protective clothing

Environment protection: Do not empty into drains/surface water/ground water without treatment

Clean-up method: Remove with liquid-absorbing material (sand, lime powder, soda ash), or dilute with plenty of water then empty into drain system. If there is a large amount of leakage, collect and dispose of contaminated material as waste according to Part 13.

B component:

Personal protection: Wear protective equipment (clothing, and glove). Before wearing protective clothing, do not contact leaking container and leakage. Quarantine the contaminated area.

Environment protection: Put out all the fire sources and cut off leak sources.

Clean-up method:Remove with liquid-absorbing material (sand, soil, vermiculite). If there is a large amount of leakage, collect and dispose of contaminated material as waste according to Part 13. Wash the contaminated ground with 3-8% ammonium hydroxide and 2-7% detergent.

Part 7 Handling and storage

Handling:

Ensure good ventilation at the work place.

Use explosion-proof equipment

Wear suitable protective clothing, safety glasses and gloves

Avoid open flames and sources of ignition.

Avoid contact with oxides, acid and base

Avoid skin and eye contact

Take measures to prevent the build-up of electronic charges.

Keep out of the reach of children

When using, do not eat, drink or smoke.

Storage:

Ensure that storage and workrooms are adequately ventilated

Keep container tightly sealed at 15-35℃

Keep away from heat and fire sources.

Keep away from acid, base, ammonia, alcohol and amine.

Store in a cool and dry place

Take precautionary measures against static discharges during storage and transport.

egs.