Shanghai Huitian New Material Co., Ltd
| Payment Terms | L/C, T/T |
| Supply Ability | 10000KG MONTH |
| Packaging Details | 22kg/set: A: 20kg /bucket, B: 2kg/bucket. |
| Color COMPONENT A | BLACK |
| Color Component B | Translucent |
| Component of Basic Materials | Polysiloxane |
| Density of A Component | 1.16 |
| Density of B Component | 0.98 |
| Viscosity | 2200 |
| Mix Ratio by weight (A:B) | 10:1 |
| Handing Curing Time | 55 mins |
| Initial Curing Time | 3 hours |
| Tensile Strength | 0.6 mpa |
| Elongation at break | 160% |
| Hardness | Shore A 20 |
| Work Temperature | -60-200 |
| Brand Name | HUITIAN |
| Model Number | 4120Q |
| Certification | SGS |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
5297 Two Part Addition Type Potting Adhesive 1.5 W/M·K Thermal Conductive Flame
5299 Two component Electrical Potting Compound / two part silicone adhesive
Power Supply Electrical Potting Compound Silicone 5295 high voltage potting
Silicone Potting Compound 9132 for Steam iron , high temperature potting
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10000KG MONTH |
| Packaging Details | 22kg/set: A: 20kg /bucket, B: 2kg/bucket. | Color COMPONENT A | BLACK |
| Color Component B | Translucent | Component of Basic Materials | Polysiloxane |
| Density of A Component | 1.16 | Density of B Component | 0.98 |
| Viscosity | 2200 | Mix Ratio by weight (A:B) | 10:1 |
| Handing Curing Time | 55 mins | Initial Curing Time | 3 hours |
| Tensile Strength | 0.6 mpa | Elongation at break | 160% |
| Hardness | Shore A 20 | Work Temperature | -60-200 |
| Brand Name | HUITIAN | Model Number | 4120Q |
| Certification | SGS | Place of Origin | CHINA |
| High Light | silicone potting compound for electronics ，silicone sealing compound | ||
● Product Features:
Ø Double component, condensation type.
Ø Room temperature curing.
Ø Ethyl alcohol released after curing, non-corrosive to electronic components
Ø High adhesion to all electronic components except for those made of PP&PE.
Ø High performance on insulation, damp proofing, vibration resistance, chemical resistance, electricleakage resistance.
Ø No need to add primer coating before use
Ø High & low temperature resistant
Ø Flame retardant rating:UL94 V-1
● Main Applications:
Ø For the deep potting of power supply and electronic components and parts.
Ø Especially suitable for the potting of inside and outside LED displays that request for flame retardant.
● How to Use
Ø Before use, stir component A by hand or machine properly, keep component B sealed in the can and cut a proper hole at the sharp mouth of cartridge.
Ø Check whether it’s adhering to Applied Materials theoretically.
Ø Mix component A and B with the mix ratio A: B=10:1 by weight. Beforehand simple tests are requested if you need to change the mix ratio.
Ø Vacuum defoaming is not necessary if the potting thickness is below 5mm,but it is requested if the thickness is more than 5mm.
Ø Heating curing is unsuited, or pinholes and blisters will occur.
Ø Long-term exposure of component B in the air is unsuited.
● Technical Data
| Item | Unit | Typical Value | ||
| Color | Component A | Black | ||
| Component B | Translucent | |||
| Component of Basic Materials | Polysiloxane | |||
| Density | Component A | g/cm3 | 1.16 | |
| Component B | 0.98 | |||
| Viscosity | Component A | mPa*s | 2800 | |
| Component B | 15 | |||
| After Mixed | 2200 | |||
| Mix Ratio by weight (A:B) | 10:1 | |||
| Handing Curing Time | min | 55 | ||
| Initial Curing Time | hour | 3 | ||
| Full Curing Time | hour | 24 | ||
| Tensile Strength | After Curing | Mpa | 0.6 | |
| Elongation at break | % | 160 | ||
| Harness | Shore A | 20 | ||
| Volume Resistivity | Ω*cm | 1x1015 | ||
| Dielectric Strength | KV/mm | 25 | ||
| Flame Retardant Rating | UL94 V-1 | |||
| Work Temperature | ℃ | -60~200 | ||
● Packing:
Ø 22kg/set: A: 20kg /bucket, B: 2kg/bucket.
● Storage:
Ø Keep it away from children.
Ø Use it in ventilated places
Ø In case of contact with skins, wipe and then flush with clear water.
Ø In case of contact with eyes, flush with clear water immediately and go to hospital for checking.
Ø Store it in dry and shady places at the temperature of 8~28℃
Ø Storage life: Component A is 12 months; Component B is 6 months since the date of manufacture.
Company Details
Business Type:
Manufacturer,Importer,Exporter,Seller
Year Established:
1977
Total Annual:
580,000,000-620,000,000
Employee Number:
1800~2000
Ecer Certification：
Verified Supplier
Huitian New Material (stock code: 300041) is the oldest enterprise in China's adhesive & new material industry, with 46 years of development history, focusing on research and development, constantly breaking through the innovative technology of adhesive new material, taking the lead in solvi... Huitian New Material (stock code: 300041) is the oldest enterprise in China's adhesive & new material industry, with 46 years of development history, focusing on research and development, constantly breaking through the innovative technology of adhesive new material, taking the lead in solvi...
Get in touch with us
Leave a Message, we will call you back quickly!