Shanghai I Fluid Technology Co., Ltd.
| Payment Terms | T/T, L/C |
| Supply Ability | 2200000 units per year |
| Delivery Time | 4-6 weeks |
| Packaging Details | wooden case pluse pallet |
| Type | Electromagnetic flow meter YF |
| Port size | DN100 |
| Connect port | flange |
| Electrode | 316L / Hasteeloy-C / Ti / Ta / Pt100 |
| Measure | flow and heat |
| Protection | IP68 |
| Accuracy | 0.25% , 0.5% |
| Power supply | 85 - 265V AC / 8-36V DC |
| Brand Name | Iflow |
| Model Number | YE-F |
| Certification | ISO9001, CE |
| Place of Origin | China |
View Detail Information
Explore similar products
DN150 Flange Pulse Water Meter Rubber Liner Electromagnetic For Waste Water
316L Stainless Steel Sewer Flow Meter DN300 For Municipal Water Supply
Pulse Output Volumetric Flow Meter , IP68 24 VDC Industrial Water Meter
Bacnet Signal Output External Flow Meter , 25-600mm ISO9001 Magnetic Flowmeter
Product Specification
| Payment Terms | T/T, L/C | Supply Ability | 2200000 units per year |
| Delivery Time | 4-6 weeks | Packaging Details | wooden case pluse pallet |
| Type | Electromagnetic flow meter YF | Port size | DN100 |
| Connect port | flange | Electrode | 316L / Hasteeloy-C / Ti / Ta / Pt100 |
| Measure | flow and heat | Protection | IP68 |
| Accuracy | 0.25% , 0.5% | Power supply | 85 - 265V AC / 8-36V DC |
| Brand Name | Iflow | Model Number | YE-F |
| Certification | ISO9001, CE | Place of Origin | China |
| High Light | electronic water meter ，magnetic inductive flow meter | ||
Electromagnetic FlowMeters for water treatment plant and waste water treatment
The usage of electromagnetic flow meter
The ElectroMagnetic flowmeters measure the velocity of conductive liquids in pipes, such as water, acids, caustic, and slurries. Magnetic flowmeters can measure properly when the electrical conductivity of the liquid is greater than approximately 5μS/cm. Be careful because using magnetic flowmeters on fluids with low conductivity, such as deionized water, boiler feed water, or hydrocarbons, can cause the flowmeter to turn off and measure zero flow.
Advantages
The magnetic flowmeter does not obstruct flow, so it can be applied to clean, sanitary, dirty, corrosive and abrasive liquids. Magnetic flowmeters can be applied to the flow of liquids that are conductive, so hydrocarbons and gases cannot be measured with this technology due to their non-conductive nature and gaseous state, respectively.
Electromagnetic flowmeters do not require much upstream and downstream straight run so they can be installed in relatively short meter runs. Magnetic flowmeters typically require 3-5 diameters of upstream straight run and 0-3 diameters of downstream straight run measured from the plane of the magnetic flowmeter electrodes.
Accuracy
| Pipe Dia (mm) | Velocity (m/s) | Accuracy |
| 3-20 | <0.3 | + 0.25% FS |
| 0.3-1 | + 1.0% Readout | |
| 1-15 | + 0.25% Readout | |
| 25-600 | 0.1-0.3 | + 0.25% FS |
| 0.3-1 | + 0.5% Readout | |
| 1-15 | + 0.3% Readout | |
| 700-3000 | <0.3 | + 0.25% FS |
| 0.3-1 | + 1.0% Readout | |
| 1-15 | + 0.25% Readout |
Grounding
From flow meter housing terminal G to grounding by minimal 1.6mm2 copper cable, resistivity < 10 Ω.
Technical data
| Product name | Electromagnetic flowmeter | ||
| Product type | Local|compact display | Remote display | Signal converter |
| Model | IYF-E | IYF-F | IRT |
| Pipe Diameter (mm) | DN10-DN2000 | ||
| Power supply | 100-240 VAC / 18-36 VDC | ||
| Accuracy | + 0.5% | + 0.5% | + 0.5% |
| Power consumption | <6w | <6w | <6w |
| Enclosure rating | IP65 | IP68 | IP65 |
| Liquid temperature | -25-120℃ | -25-120℃ | -25-120℃ |
| Ambient temperature | -25-50℃ | -25-50℃ | -25-50℃ |
| Relative humidity | 10-90% | 10-90% | 10-90% |
| Meter ratio | 1:100 | 1:100 | 1:100 |
| Flow direction | Bi-direction flow | Bi-direction flow | Bi-direction flow |
| Communication | RS485 / Bacnet | RS485 / Bacnet | RS485 / Bacnet |
| Signal Output | 4-20mA/Pulse/Frequency | 4-20mA/Pulse/Frequency | 4-20mA/Pulse/Frequency |
Features
Dimensions
Mount warning notice
Model selection
Applicable metering liquid:
Non-applicable metering medial
Notice on the selection of local type and remote type:
Remote type means the transmitter and converter display are mounted in different locations, it’s suggested to select
remote type in the following conditions:
| I | Model | ||||||||
| YF | Electromagnetic flowmeter | ||||||||
| TF | Turbine | ||||||||
| VF | Votex | ||||||||
| LX | Vane wheel | ||||||||
| T | Ultrasonic | ||||||||
| E/F display mode | E: compact/local display, F: remote display | ||||||||
| Pipe Dia | Type (mm) | ||||||||
| xxxx | 15, 20, 25, 32, 40, 50, 65, 80, 100, 125, 150, 200, 250, 300, 400, 500, 600, 800, 1000 | ||||||||
| Code | Accuracy | ||||||||
| 1 | + 0.5% FS | ||||||||
| 2 | + 1.0% FS | ||||||||
| 3 | + 0.2% FS | ||||||||
| Code | Type | ||||||||
| N | Converter: 12 / 24 VDC, pulse output | ||||||||
| A | Transmitter: 24VDC, 4-20mA outpt | ||||||||
| B | Intelligent, Lion battery, no local display | ||||||||
| G | Smart, local display, 4-20mA output | ||||||||
| C1 | Smart, local display, RS485 | ||||||||
| C2 | Smart, local display, HART | ||||||||
| Code | Type | ||||||||
| S | Carbon steel housing | ||||||||
| L | Stainless steel housing | ||||||||
| G | High pressure housing | ||||||||
| HL | 316L electrode | ||||||||
| HTi | Titanium electrode | ||||||||
| HTa | Tantlum electrode | ||||||||
| HC | Hastelloy-C electrode | ||||||||
| L1 | Liquid media | ||||||||
| L2 | Gas media | ||||||||
| P | Pressure compensation | ||||||||
| T | Temperature compensation | ||||||||
| PT | Pressure&Temp. Compensation | ||||||||
| F | PTFE liner | ||||||||
| X | Rubber liner | ||||||||
| Sample: IYF-E-0100-1-C1-S-HL-L1-F, Magmeter, local display, Dia: 100mm, + 0.5%FS, carbon steel housing, smart, 4-20mA outpt, RS485, 316L electrodes, liquid media meter, PTFE liner | |||||||||
Pipe Diameter, flow volume and product dimension
| Dia | Flow volume (m3/h) | Product dimension (mm) | |||||
| (mm) | Normal | Min | Max | L | D | H | H1 |
| 15 | 1.5 | 0.06 | 9.5 | 150 | 95 | 272 | 254 |
| 20 | 2.5 | 0.11 | 16.9 | 105 | 277 | 254 | |
| 25 | 3.5 | 0.18 | 26.5 | 115 | 283 | 254 | |
| 32 | 6 | 0.29 | 43.6 | 140 | 297 | 270 | |
| 40 | 10 | 0.45 | 67.8 | 150 | 307 | 280 | |
| 50 | 15 | 0.71 | 106.0 | 200 | 165 | 318 | 294 |
| 65 | 25 | 1.19 | 179.1 | 185 | 337 | 313 | |
| 80 | 40 | 1.81 | 271.4 | 200 | 352 | 326 | |
| 100 | 60 | 2.83 | 424.1 | 250 | 220 | 371 | 344 |
| 125 | 100 | 4.42 | 665 | 250 | 401 | 372 | |
| 150 | 135 | 6.36 | 954 | 300 | 285 | 431 | 403 |
| 200 | 250 | 11.3 | 1696 | 350 | 340 | 486 | 460 |
| 250 | 375 | 17.66 | 2650 | 400 | 395 | 547 | 511 |
| 300 | 540 | 25.43 | 3817 | 450 | 445 | 597 | 565 |
| 350 | 735 | 34.62 | 5195 | 505 | 657 | 620 | |
| 400 | 960 | 45.22 | 6785 | 500 | 565 | 717 | 675 |
| 450 | 1200 | 57.23 | 8588 | 550 | 615 | 757 | 727 |
| 500 | 1500 | 70 | 10602 | 600 | 670 | 817 | 782 |
| 600 | 2160 | 100 | 15268 | 780 | 917 | 782 | |
| 700 | 2950 | 138 | 20781 | 700 | 895 | 1027 | 1068 |
| 800 | 3850 | 180 | 27100 | 800 | 1015 | 1137 | 1157 |
Industrial applications
| Chemical | Food & beverage | Paper mill |
| Metallurgy | Environment protection | Hydraulic |
| Mining | Stainless | Petroleum |
| Pharmacy | Air conditioner | Effluent treatment plant |
| Seawater desalination | Pharmacy | Water treatment |
Competitive advantage
Process control
Calibration equipment
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
1966
Total Annual:
15000000-20000000
Employee Number:
400~500
Ecer Certification：
Active Member
Shanghai I Fluid Technology Co., Ltd, a technique based company. We focus on the deployment , installation and management system of smart metering and smart grid in all utility sectors, include but not limited to water, heat, gas and electricity. To adapt to the global environment prote... Shanghai I Fluid Technology Co., Ltd, a technique based company. We focus on the deployment , installation and management system of smart metering and smart grid in all utility sectors, include but not limited to water, heat, gas and electricity. To adapt to the global environment prote...
Get in touch with us
Leave a Message, we will call you back quickly!