10 Liters Small Size Thermal Shock Test Chamber -55C~+150C With 300W Heat Load

Product Specification

10 Liters Small Size Thermal Shock Test Chamber -55C ~-150C With 300W Heat Load/5kg Aluminum Ingot

Product Presentation

The small temperature shock test chamber is no different from conventional equipment in function and performance. However, It is smaller in size, lower in power consumption, lower in use cost ,more cost-effective in maintenance , and more favorable in purchase price. Those are all advantages that conventional equipment (with standard volume 100~1000L) don't have.

Product Details

1. Product application:

The thermal shock test chamber is suitable for necessary test equipment in the fields of solar photovoltaic modules, batteries, auto parts, LED optoelectronics, semiconductors, aviation, automobiles, home appliances, scientific research, etc. It is used to test and determine the performance of electrical, electronic and other products and materials. The parameters and performance of the high and low temperature test after the temperature and environmental impact change.

2. Product positioning:

For aerospace, aviation, electronics, automobiles, batteries and other products and test units such as quality inspection institutes, research institutes, colleges and universities, it provides virtual space to simulate the real environment, product inspection, and verification of R&D results. The test box is to shorten the development cycle, An indispensable right-hand man for improving product quality and reliability.

2. Technical Specifications:

Product Name: Two-Zone Type Thermal Shock Test Chamber
Product model: YC-10TS2
Cooling method: Air-cooled, or Water-cooled
Effective volume: 10L

Test Chamber size:
W200×D200×H250mm (WXDXH)


Exterior Chamber size:
W700×D850×H1460mm (width X depth X height) (subject to actual design)


Power supply: AC220V/AC 380V about 5KW

Working noise: A sound level ≤ 75dB(A)
(1m in front of the gate and 1.2m above the ground, measured in free space)

2. Temperature Performance:

High temperature chamber

(1) Preheat upper limit temperature: +200℃

(2) Heating time: normal temperature→+200℃ ≤ 45min (storage time)

Note: The heating time is the performance of the high temperature box running alone

Low temperature Chabmer

(1) Pre-cooling lower limit temperature: -70℃

(2) Cooling time: normal temperature→-70℃≤ 60min (storage time)

Note: The cooling time is the performance of the low temperature box running alone
 

Thermal shock temperature range 

(1) High temperature shock temperature range: +60℃～+150℃

(2) Temperature range for Low temperature chamber: -55℃～-10℃

Temperature fluctuation: ≤ ±0.5℃
Temperature uniformity: ≤ ±2.0℃
Impact test conditions

High temperature shock: +60℃～+150℃, high temperature exposure time more than 15min
Low temperature shock: -55℃～-10℃, low temperature exposure time more than 15min
Temperature deviation ±2.0°C (≤ +150°C) ±3.0°C (>+150°C)
Temperature resolution 0.01℃

Test method: pneumatic vertical hanging basket

Defrost method: manual or automatic defrost
Defrost cycle :once for every 20 cycles  is standard.

(  defrost once for every 20-200 cycles;defrost once for every 200-500 cycles  and defrost once for every  500-1000 cycles are optional if equipmed with low temperature drying processor)

Recovery time: ≤ 3min 
Standard Heat load : 300W calorific value 5kg aluminum ingot

Distributors Welcomed

We are currently looking for distributors and sales representative all around the world.
If you would like to discuss becoming a distributor for us, please contact:

Sales Manager

Tel.: +86 18664198666 
 
Email: sales@mentekint.com

In order to be considered as a Business Partner, it is necessary to prepare the below information:

· Your company information, please

· Your proposal plan for how to promote and distribute our environmental test chambers.

· Your company activity for advertisement.

· Your current business introduction.

· What kind of support do you expect from us?