1PCS 7.4A Industrial Servo Motor 1000W YASKAWA New SGMAV-10ADA21 Servo Motor

SGMAS-01A2A-FJ12

SGMAS-01A2A-FJ13

SGMAS-01A2A-YR11

SGMAS-01ACA21

SGMAS-01ACA2C

SGMAS-01ACA61

SGMAS-01ACA61-Y2

SGMAS-01ACAB1

SGMAS-01ACABC

SGMAS-02A2A21-Y1

SGMAS-02A2A21-Y2

SGMAS-02A2A2C

SGMAS-02A2A4C

SGMAS-02A2AHC21

SGMAS-02A2A-YR11

SGMAS-02A2A-YR31

SGMAS-02ACA21

SGMAS-02ACA2C

SGMAS-02ACA41

SGMAS-02ACA4C-E

SGMAS-02ACA6C

SGMAS-02ACABC

SGMAS-02ACAH16C

SGMAS-02ACB21

SGMAS-04A2A21-Y2

SGMAS-04A2A2B

SGMAS-04A2A2C

SGMAS-04A2A2C-Y2

SGMAS-04A2A41

SGMAS-04A2A4C

SGMAS-04A2A4C-Y2

SGMAS-04ACA21

SGMAS-04ACA2C

SGMAS-04ACA41

SGMAS-04ACA41-E

SGMAS-04ACA61

SGMAS-04ACAB1

SGMAS-04ACABC

SGMAS-04ACAH12C

SGMAS-04AGA-SU12

So the length of the pulse decides the voltage applied at the error amplifier as a desired voltage to produce the desired speed or position.

In digital control, microprocessor or microcontroller are used for generating the PWM pluses in terms of duty cycles to produce more accurate control signals.

The feedback signal corresponding to the present position of the load is obtained by using a position sensor. This sensor is normally a potentiometer that produces the voltage corresponding to the absolute angle of the motor shaft through gear mechanism. Then the feedback voltage value is applied at the input of error amplifier (comparator).

The error amplifier is a negative feedback amplifier and it reduces the difference between its inputs. It compares the voltage related to current position of the motor (obtained by potentiometer) with desired voltage related to desired position of the motor (obtained by pulse width to voltage converter), and produces the error either a positive or negative voltage.

This error voltage is applied to the armature of the motor. If the error is more, the more output is applied to the motor armature.

As long as error exists, the amplifier amplifies the error voltage and correspondingly powers the armature. The motor rotates till the error becomes zero. If the error is negative, the armature voltage reverses and hence the armature rotates in the opposite direction.

The 5-star servo motor
There are no compromises when it comes to the quality, reliability and performance of the Sigma-5. It is designed to provide all that one expects from a servo and more.

Sizes from 50 W to 15 kW, rated speeds of 1500 and 3000 rpm
Peak torque 350% of nominal during 3 seconds
Automatic motor recognition by servo drive
IP67 and shaft oil seal available
High resolution encoders
Absolute multiturn encoder resolution

Compact design and robust construction

Yaskawa SGMAV-10A3A21 SGMAV
Output :1 KWMaximum torque :9.55 NmRated Speed :3000 1/minMax speed :6000 1/minRotor inertia :0.00141 kg.m²Rated Current :7.4 AMax. Current :23.9 ARated Torque :3.18 Nm

Yaskawa SGMAV-10A3A61 SGMAV
Output :1 KWMaximum torque :9.55 NmRated Speed :3000 1/minMax speed :6000 1/minRotor inertia :0.00141 kg.m²Rated Current :7.4 AMax. Current :23.9 ARated Torque :3.18 Nm

Yaskawa SGMAV-10ADA61 SGMAV
Output :1 KWMaximum torque :9.55 NmRated Speed :3000 1/minMax speed :6000 1/minRotor inertia :0.00141 kg.m²Rated Current :7.4 AMax. Current :23.9 ARated Torque :3.18 Nm

Yaskawa SGMAV-10ADA6C SGMAV
Output :1 KWMaximum torque :9.55 NmRated Speed :3000 1/minMax speed :6000 1/minRotor inertia :0.00141 kg.m²Rated Current :7.4 AMax. Current :23.9 ARated Torque :3.18 Nm

Yaskawa SGMAV-10A3A6E SGMAV
Output :1 KWMaximum torque :9.55 NmRated Speed :3000 1/minMax speed :6000 1/minRotor inertia :0.00141 kg.m²Rated Current :7.4 AMax. Current :23.9 ARated Torque :3.18 Nm