Mitsubishi HF53S Servo Electric Motor 0.5KW 3 phase Industrial motors 3AC 128V 2

Mitsubishi HF53S Servo Electric Motor 0.5KW 3 phase Industrial motors 3AC 128V 2.9A NEW

Mitsubishi Electric servo systems have become one of the most globally respected names in factory automation. The broad range of high quality servo offerings include standard safety features, multi-axis amplifiers, linear and direct drive motors, and world class performance for industrial automation applications.

Introduction of Industrial Servo Motors

What is a servo motor?

Servo motors (or servos) are self-contained electric devices (see Figure 1 below) that rotate or push parts of a machine with great precision. Servos are found in many places: from toys to home electronics to cars and airplanes. If you have a radio-controlled model car, airplane, or helicopter, you are using at least a few servos. In a model car or aircraft, servos move levers back and forth to control steering or adjust wing surfaces. By rotating a shaft connected to the engine throttle, a servo regulates the speed of a fuel-powered car or aircraft. Servos also appear behind the scenes in devices we use every day. Electronic devices such as DVD and Blu-ray Disc^TM players use servos to extend or retract the disc trays. In 21st-century automobiles, servos manage the car's speed: The gas pedal, similar to the volume control on a radio, sends an electrical signal that tells the car's computer how far down it is pressed. The car's computer calculates that information and other data from other sensors and sends a signal to the servo attached to the throttle to adjust the engine speed. Commercial aircraft use servos and a related hydraulic technology to push and pull just about everything in the plane.

How does a servo motor work?

The simplicity of a servo is among the features that make them so reliable. The heart of a servo is a small direct current (DC) motor, similar to what you might find in an inexpensive toy. These motors run on electricity from a battery and spin at high RPM (rotations per minute) but put out very low torque (a twisting force used to do work— you apply torque when you open a jar). An arrangement of gears takes the high speed of the motor and slows it down while at the same time increasing the torque. (Basic law of physics: work = force x distance.) A tiny electric motor does not have much torque, but it can spin really fast (small force, big distance). The gear design inside the servo case converts the output to a much slower rotation speed but with more torque (big force, little distance). The amount of actual work is the same, just more useful. Gears in an inexpensive servo motor are generally made of plastic to keep it lighter and less costly (see Figure 3 below). On a servo designed to provide more torque for heavier work, the gears are made of metal (see Figure 4 below) and are harder to damage.

Types of servo motors

Servos come in many sizes and in three basic types: positional rotation, continuous rotation, and linear.

• Positional rotation servo: This is the most common type of servo motor. The output shaft rotates in about half of a circle, or 180 degrees. It has physical stops placed in the gear mechanism to prevent turning beyond these limits to protect the rotational sensor. These common servos are found in radio-controlled cars and water- and aircraft, toys, robots, and many other applications.
• Continuous rotation servo: This is quite similar to the common positional rotation servo motor, except it can turn in either direction indefinitely. The control signal, rather than setting the static position of the servo, is interpreted as the direction and speed of rotation. The range of possible commands causes the servo to rotate clockwise or counterclockwise as desired, at varying speed, depending on the command signal. You might use a servo of this type on a radar dish if you mounted one on a robot. Or you could use one as a drive motor on a mobile robot.
• Linear servo: This is also like the positional rotation servo motor described above, but with additional gears (usually a rack and pinion mechanism) to change the output from circular to back-and-forth. These servos are not easy to find, but you can sometimes find them at hobby stores where they are used as actuators in larger model airplanes.

Models of HC-KFS Series Servo motors

Good Service in WTL:
 
> We offer high quality, fast delivery, competitive price for Mitsubishi Servo Motor.
 
> Please send your RFQ to get the latest price.
 
> Normally, we will ship the items in 1-2 weeks after receive the payment.
 
> We can ship to you by UPS/DHL//EMS/Fedex. Please contact us and we will use your preferred ways.
 
> We have a large stock and the prices are variable, so sometimes the prices we post are not accurate. If needed, please contact us for specific prices.