Chengdu Haoli Electronic Technology Co.,Ltd.
| Payment Terms | TT |
| Delivery Time | 10 work days |
| keyword | PCB Control Board |
| other name | Multifunctional Clothes Rack Controller |
| certification | CE，ISO9001，ROHS |
| brand | HAOLI |
| Brand Name | HAOLI |
| Place of Origin | ChengDu |
| Certification | CE，ISO9001，ROHS |
View Detail Information
Explore similar products
100W Open Frame PCB Control Board Frequency Modulation Type CE Approval
High Performance PCB Control Board , Durable Remote Control Pcb Board
DC 12V PCB Control Board , HD01 Master Control Board For Sterilization
AC220V / 110V PCB Control Board Heating Control Adjustable GM3 / 4 Model
Product Specification
| Payment Terms | TT | Delivery Time | 10 work days |
| keyword | PCB Control Board | other name | Multifunctional Clothes Rack Controller |
| certification | CE，ISO9001，ROHS | brand | HAOLI |
| Brand Name | HAOLI | Place of Origin | ChengDu |
| Certification | CE，ISO9001，ROHS | ||
| High Light | remote control pcb board ，master control board | ||
Sterilizing power supply36VDC Multifunctional clothes rack controller,full function
This controlleris designed against intelligent electric clothes rack,it is a full-function master control which can control clothes rack though the remote control(433MHZ wireless reception).it's main control function include of UV lights and control,tec,with function integration.
Power supply motor is a AC-DC switching power supply,24VDC output constant current is 270ma,UV driver for UV light is DC-DC power supply, input 24VDC,output:8-12VDC 2outputs,300mA constant current.
Output parameter
| Output voltage | Min current | Max current | Peak current | Output power | R&N(MAX) |
| +24VDC | 0A | 2.8A | 3.1A | 67.2W | 100mv |
| +5VDC | 0A | 0.2A | / | 1.0W | 200mv |
| +9VDC | 0A | 0.3A | / | 2.7W | 200mv |
| +9VDC | 0A | 0.3A | / | 2.7W | 200mv |
| +36VDC | 0A | 0.27A | / | 9.7W | 300mv |
Remarks:
a. Maximum continuous output power of power supply:83W;DC output ripple &noise test conditions;
b: Oscilloscope should be limited at 20MHZ bandwith;
c: At output terminals with parallel 0.1uF ceramic and 47uF electrolytic capacitors;
Combined load/Line Regulation
| Output function | Output valtage | Min voktage | Max voltage | Load regulation |
| Moto power supply | +24VDC | 22.8VDC | 25.2VDC | 5% |
| Standby power supply | +5VDC | 4.5VDC | 5.5VDC | / |
| Sterilizing power supply | +9VDC | 8VDC | 12VDC | / |
| Sterilizing power supply | +9VDC | 8VDC | 12VDC | / |
| LED Lamp power supply | +36VDC | 28VDC | 38VDC | / |
Technical characteristics
Input characteristics
| Item | UNIT | Min | Rated | MAX | Notes |
| Input voltage | Vac | 180 | 220 | 265 | / |
| Inut Frequency | HZ | 47-63 | 47-63 | 47-63 | / |
| Input current | A | / | / | 0.9A | 230VAC/50HZ,full load cold start |
| Inrush current | A | / | / | 50 | 230VAC/50HZ,full laod cold start |
| Efficiency | % | 80 | / | / | 100VAC/240VAC/50/60HZ,full load |
Output characteristics
| Item | Unit | Min | Rated | Max | Notes |
| Overshoot&undershoot Response | % | +/-5 | Power off | ||
| Setup Time | s | 2 | 115Vac,full load | ||
| Rise Time | ms | 400 | At 115VAC input and output Max.load,Theoutput voltages shall rise from 10% to 90%of their output volatge | ||
| Hold time | ms | 5 | / | At 115Vac input and output Max load. |
Wireless reception function
1. Wireless receiving frequency:433.92MHZ,System:ASK;
2. Wireless receiving frequency fluctuation :<5KHZ;
3. Close time:code time window between remode controller and receiving board in three seconds;
4. Controlling Distance:>20M
Protection function
1. Short circuit on AC port,power supply no outputm when relieved,power supply gets back to normal.
2. Motor alarm detection:when the motorpower supplycurrent into2.8+/-0.1A,the control board receives the alam singnal,alam every 2 sencods,until the alarm signal is eliminated
3. Moto overload protection: when the current from motor output part>3.1A.the control board receives the overload signal,immediately cuts the motor power supply and operales the motor without action within 30S;
4. Resistance bounce:similat the state of the clothes rack in the runing process by limit switch.when the block is encountered,the whose circuit board stops the motoraction imediately.later up running for 2S to eliminated the state of resistance.
Enter into standby
1. The controller enter into standby when it is electrified.
2. When all functions are tuned off,no operation for more 5 minutes,the main control panel is in standby state.
3. if the host get in to standby stadus ,whatever instructions the remode control sends ,the controller exits the standby state and enters normal working mode.
FAQ
Q1: How many year warranty of your Product?
A: Two years.
Q2: Do you have power factory?
A: Yes.We are OEM&ODM manufacturer in Chengdu.
Q3: Do you offer sample of power?
A: Yes.We offer free sample ,but you need pay the shippment.
Q4: Do you have any certification?
A: Yes.We have CE,ISO9001,ROHS,if you need other certification with large order,we can apply for it.
Company Details
Business Type:
Manufacturer
Year Established:
2019
Total Annual:
3000000-5000000
Employee Number:
100~120
Ecer Certification：
Active Member
Chengdu Hao Li Electronic Technology Co., Ltd. is mainly engaged in the application design, development, production and sales of power supply and ultrasonic products. It has nearly 20 years of experience. It has in-depth cooperation with University of Electronic Science and Technology and Sichuan Un... Chengdu Hao Li Electronic Technology Co., Ltd. is mainly engaged in the application design, development, production and sales of power supply and ultrasonic products. It has nearly 20 years of experience. It has in-depth cooperation with University of Electronic Science and Technology and Sichuan Un...
Get in touch with us
Leave a Message, we will call you back quickly!