48Gbps Industrial Managed POE Switch 16Ports POE AF/AT 340W

Product Specification

16Ports POE AF/AT 340W Gigabit Ethernet Industrial Managed POE Switch

Introduction

IM-FP021616GW series is the 10/100/1000 Mbps industrial POE fiber switch, comply with IEEE802.3af, power on POE IP cameras through the Ethernet cable, operating temperature-40 ℃to + 85℃, support wide voltage dual power input, meet IP30 protection degree and EMC industrial grade requirements, support many managed functions, include RSTP IGMP, VLAN, Qos, IPV6, Loop protection, ERPS and so on. pass through dangerous environmental certification and comply with FCC and CE standards. The reliable industrial grade design could ensure continuous and stable operation of the automation system.

Key Features

1. Support power on POE IP cameras through the wireless access point (AP) of 5 categories of Ethernet cable.

2. IEEE 802.3af power on to 1 ~ 16 RJ45 ports

3. 16 x 10/100/1000Mbps Auto-sensing TX RJ45 ports ( Port 23 and 24 are COMBO ports)
4. 2 x 1000Mbps SFP fiber ports( Port FX3 and FX4 are COMBO ports)
5. Support cable diagnosis and can locate the fault point

6. Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption

7. Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)

8. Support Qos, transport classification Qos, Cos, bandwidth control (input/output direction), storm suppression ,differentiated services

9. Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN, Protocol VLAN,VLAN convert, MVR

10. Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation

11. Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching

12. Support IGMP agent report, MLD snooping

13. Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2

14. Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet

15. Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing

16. Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82

17. Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP

18. Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL.

Spectification

Application

Glossary

MSTP

In 2002, the IEEE introduced an evolution of RSTP: the Multiple Spanning Tree Protocol. The MSTP protocol provides for multiple spanning tree instances, while ensuring RSTP and STP compatibility. The standard was originally defined by IEEE 802.1s, but was later incorporated in IEEE 802.1D-2005.

MVR

Multicast VLAN Registration (MVR) is a protocol for Layer 2 (IP)-networks that enables multicast-traffic from a source VLAN to be shared with subscriber-VLANs. The main reason for using MVR is to save bandwidth by preventing duplicate multicast streams being sent in the core network, instead the stream(s) are received on the MVR-VLAN and forwarded to the VLANs where hosts have requested it/them (Wikipedia).

NAS

NAS is an acronym for Network Access Server. The NAS is meant to act as a gateway to guard access to a protected source. A client connects to the NAS, and the NAS connects to another resource asking whether the client's supplied credentials are valid. Based on the answer, the NAS then allows or disallows access to the protected resource. An example of a NAS implementation is IEEE 802.1X.