Industrial Managed Ethernet Gigabit SFP Switch LC Connector 8 Port 10/100

Product Specification

Industrial Managed Ethernet Switch LC Connector

Introduction of Industrial Managed Ethernet Switch

IM-FS280GW series is the 10/100/1000 Mbps industrial managed fiber switch, operating temperature -40 ℃ to + 75 ℃, support wide voltage dual power input, support web management, meet IP40 protection degree and EMC industrial grade requirements, DIN rail installation, pass through dangerous environmental certification and comply with FCC and CE standards. The reliable industrial grade design could ensure continuous and stable operation of the automation system.

Key Features of Industrial Managed Ethernet Switch

1. 8 x 10/100/1000Mbps Auto-sensing RJ45 ports
2. 2 x 1000Mbps SFP fiber port
3. 6 KV Ethernet surge protection, adapt to a harsh outdoor environment
4. Support Auto MDI/MDIX
5. Flow control mode: full duplex with IEEE 802.3x standard, half-duplex with Back pressure standard
6. IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
7. A store-and-forward switching mechanism
8. Operating environment temperature: -40 ° ~75 ° c
9. Support cable diagnosis and can locate the fault point
10. Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
11. Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
12. Support Qos, transport classification Qos, Cos, bandwidth control (input/output direction), storm suppression ,differentiated services
13. Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN, Protocol VLAN,VLAN convert, MVR
14. Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
15. Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
16. Support IGMP agent report, MLD snooping
17. Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+,HTTP/HTTPS, SSL/SSH v2
18. Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
19. Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
20. Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
21. Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
22. Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL

Specification of Industrial Managed Ethernet Switch

Mechanical information of Industrial Managed Ethernet Switch

Shell: Corrugated metal shell

Safety class: IP40

Dimension:158 x 114.8 x 60mm

Mounting method: Din-rail mounting

Industry Standards of Industrial Managed Ethernet Switch

EMI: FCC Part 15 Subpart B Class A, EN 55022 Class A

EMS:EN 61000-4-2 (ESD) Level 3,EN 61000-4-3 (RS) Level 3, EN 61000-4-4 (EFT) Level 3,EN 61000-4-5 (Surge) Level 3, EN 61000-4-6 (CS) Level 3,EN 61000-4-8

Traffic Control: NEMA-TS2

Vibration: IEC 60068-2-6

Freefall: IEC 60068-2-32

Shock: IEC 60068-2-27

Rail Traffic: EN 50121-4

Packing List of Industrial Managed Ethernet Switch

1. One Managed Fiber Switch, one console cable, one user manual, and one warranty card are in one box.
2. 20pcs boxes are in one carton. (55.5*40*43cm)

Lead Time of Industrial Managed Ethernet Switch

Warranty & Guarantee of Industrial Managed Ethernet Switch

1. All the products we offer are brand new with new components and parts, and we absolutely never use old and refurbished materials.

2. 36 Months Manufacturer Warranty (Excluding contrived damage or misusage). All the products have been passed the functional test and aging test before delivery.

3. If there is any compatibility problem or any quality problem, the goods can be returned to us to repair or replace. The buyer should be responsible for all the charges of returning and second shipping.

Quality Control of Industrial Managed Ethernet Switch

1. All the products we offer are brand new with new components and parts, and we absolutely never use old and refurbished materials.
2. Every production process has a special person to test to ensure quality
3. Every product must be tested before shipping to our customers. The quality is attached to great importance during the whole production process.
4. All products have passed CE, FCC, ROHS, and other certifications

FAQ of Industrial Managed Ethernet Switch

A: Yes, we provide OEM service. If you have requirements about the customized product, we also provide it.

Q: Is a small DIN rail included?

A: This is a DIN rail switch, but the DIN rail is not included.

Q: Do you have CE, FCC, ROHS?

A: Yes.

Q: How do you guarantee the quality?

A: we absolutely never use old and refurbished materials. Always a pre-production sample before mass production; 48 hours aging test before delivery. Always final Inspection before shipment.

Application of Industrial Managed Ethernet Switch