Product Specification

Gigabit  8-Port 802.3bt Layer 2 Managed Switch

Basic Information of 8 port PoE switch

• Port: 2*100/1000/2500M SFP fiber ports+1*Console port+2 Combo ports+8*100/1000M Copper
• PoE Standard: IEEE 802.3af/at/bt (15.4W/30W/60W/90W) on 1 ~ 8 RJ45 ports, 720W budget
• Management Feature: Vitesse-based, QoS/STP/ERPS/MPLS/VLAN...

• POE distance: 100-meter, support external POE accessory(POE extender/splitter)
• Operating temperature -40℃ to + 75℃(fully tested)
• IP40 protection level
• DIN rail design, fan-less heat dissipation
• CE/FCC compliant
• 6KV Ethernet surge protection, 1500V Port-to-port isolation voltage
• Support Auto MDI/MDIX
• Flow control mode: full duplex with IEEE 802.3x standard half-duplex with Back pressure standard
• IEEE 802.3 10Base-T and IEEE 802.3u 100Base-TX compliant
• A store-and-forward switching mechanism

​Key Features of POE managed Switch

1. Real-time display of voltage, current, power and PD level and full indicators
2. Enable/disable the POE ports, set the POE power-on delay and POE output power
3. Support relay alarm output and alarm status light display(2 way-from dry contact)

Specification of industrial POE switch

Application of BT standard PoE switch

• Supply power to power-hungry devices
• Optical Telecommunication
• Remote controlling and monitoring
• Outdoor CCTV security surveillance
• Broadband private network

​Management Features

1. Support cable diagnosis and can locate the fault point
2. Support IEEE802.3az EEE (Energy Efficient Ethernet) Management, optimize power consumption
3. Support STP, RSTP, MSTP, ITU-T G.8032 Ethernet Protection Ring(EPR)
4. Support Qos, transport classification Qos, Cos, bandwidth control (input/output direction), storm suppression ,differentiated services
5. Support IEEE802.1q VLAN,VLAN port ,based Mac VLAN,IP subnet VLAN, Protocol VLAN,VLAN convert, MVR
6. Support dynamic IEEE802.3ad LACP link aggregation, static link aggregation
7. Support IGMP/MLD snooping V1/V2/V3, IGMP filtrating/ modulating, IGMP searching
8. Support IGMP agent report, MLD snooping
9. Safety: based on port and Mac IEEE802.1X, RADIUS, ACL, TACACS+, HTTP/HTTPS, SSL/SSH v2
10. Support Cisco® like CLI, Web management, SNMP v1/v2c/v3, Telnet
11. Support software upgrade via TFTP and HTTP, firmware redundancy prevents upgrade failing
12. Support DHCP client/Relay/Snooping/Snooping option 82/Relay option 82
13. Support RMON, MIB II, mirror image, event log, DNS, NTP/SNTP, IEEE802.1ab LLDP
14. Support IPV6 Telnet server /ICMP v6, SNMP, HTTP, SSH/SSL, NTP/SNTP,TFTP, QoS, ACL.

FAQ

• Alarm ports

It is I/O ports, there is no serial communication.

Clink all in the management interface

Connect those 2 alarm ports to an external bell or siren

The bell/siren rings to warm the users if any port is down(remote real-time monitoring)

• Management

Support Console/ SNMP/CLI(SSH/Lan port/Telnet...) and IP address management

Programmable POE&Power Supply

It continuously supplies 15.4W/30W/60W/90W standard power to PD devices from 8 POE ports(excluding combo ports)

We do not suggest connecting too many power-hungry devices to a single switch, this will affect the stability

Full-load, 720W POE output, 15A/48V power supply is required

Programmable POE output budget such as 480W/240W to match your in-hand power supply

It is recommended to set 480W for better stability and service life.

• Simple Customization

Support

It is basically about

Putting customer logo in the management interface

Putting customer model name in the management interface

Putting customer brand color in the management interface