HENAN ZG INDUSTRIAL PRODUCTS CO.,LTD
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | 10000 pieces per month |
| Delivery Time | 3 working days |
| Packaging Details | Strong wooden box for Global shipping |
| MAX TEMPERATURE: | Up To 1450℃ |
| APPLICATION: | Electric Furnaces And Electric Heating Devices |
| PRODUCTS: | SiC heating elements |
| SHAPE: | ED/U/W/SC/SCR/DB/G/H/DM |
| POWER SOURCE: | Electric |
| PURITY: | 99.9% High Purity |
| Brand Name | ZG |
| Model Number | MS |
| Certification | CE |
| Place of Origin | CN |
View Detail Information
Explore similar products
54mm Dia Sic Heating Elements
MoSi2 Heating Elements Molybdenum Disilicide Heating Elements
Silicon Carbide Electric Heating Element Dia 8mm High Density
Molybdenum Disilicide Mosi2 Heating Element For Furnaces
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | 10000 pieces per month |
| Delivery Time | 3 working days | Packaging Details | Strong wooden box for Global shipping |
| MAX TEMPERATURE: | Up To 1450℃ | APPLICATION: | Electric Furnaces And Electric Heating Devices |
| PRODUCTS: | SiC heating elements | SHAPE: | ED/U/W/SC/SCR/DB/G/H/DM |
| POWER SOURCE: | Electric | PURITY: | 99.9% High Purity |
| Brand Name | ZG | Model Number | MS |
| Certification | CE | Place of Origin | CN |
| High Light | High Temperature Sic Heating Elements ，High Temperature Silicon Carbide Heater ，1450C Silicon Carbide Heater | ||
High Temperature Sic Heating Elements Silicon Carbide Heater
Silicon Carbide Heating Element Advantages
1. Generates high heat output per unit surface area, approximately 5- 10 times than the output of Nichrome wire,
2. High strength and excellent shock resistance,
3. Heat source is free of noise and air pollution.
Types and Applications of Silicon Carbide Heating Element
1. SW (Standard)
SW Silicon Carbides are used in applications ranging in temperature from 600°C up to 1400°C in both air and controlled atmospheres. Although the type of atmosphere used will determine the maximum recommended element temperature. This kind of silicon carbide elements can be mounted either vertically or horizontally.
2. U-TYPE
U shape Silicon Carbide is consists of two silicon carbide rod with same diameter. Each rod has both hot zone and cold end with identical resistance. Two rods are connected by the low resistance SiC. Also the connector could be used as holder according to different requirements.
3. W-TYPE
3-phase elements are available in 2 different types: SGC (Dumbbell), SGD(Standard).
These elements are self-bonded silicon carbide formed by re-crystallization of silicon carbide at high temperature. It consists of three high-purity silicon carbide rods connected at one end by a silicon carbide crossbar. SGC elements are designed for vertical installation in standard float glass bathes and SGD elements for horizontal installation. They can be connected directly on three-phase power supply and is a one-side terminal type which permits drawing out the terminals from the roof of the furnace.
Physical property of SIC heating element
| specific gravity | 2.6~2.8g/cm³ | bend strength | >300kg |
| hardness | >9MOH’S | tensile strength | >150kg/cm³ |
| porosity rate | <30% | radiance | 0.85 |
Recommended surface load and Influences to Surfaces of the Elements in Different Operating TemperatureS
| atmosphere | Furnace Temperature(°C) | Surface Load(W/cm2) | The influence on the Rod |
| Ammonia | 1290 | 3.8 | The action on SiC produces methane and destroys the protection film of SiO2 |
| Carbon dioxide | 1450 | 3.1 | Corrode SiC |
| Carbon monoxide | 1370 | 3.8 | Absorb carbon powder and influence the protection film of SiO2 |
| Halogen | 704 | 3.8 | Corrode SiC and destroy the protection film of SiO2 |
| Hydrogen | 1290 | 3.1 | The action on SiC produces methane and destroys the protection film of SiO2 |
| Nitrogen | 1370 | 3.1 | The action on SiC produces insulating layer of silicon nitride |
| Sodium | 1310 | 3.8 | Corrode SiC |
| silicon dioxide | 1310 | 3.8 | Corrode SiC |
| Oxygen | 1310 | 3.8 | SiC oxidized |
| Water-vapor | 1090-1370 | 3.1-3.6 | The action on SiC produces hydrate of silicon |
| Hydrocarbon | 1370 | 3.1 | Absorb carbon powder resulted in Hot pollution |
Notice for using and installing:
1. Heater should be protected against damp during storing or installing to ensure the performance of the heater.
2. In order to be sure of well-distributed lod of each and groups, heater should be divided before assembling. The tolerance of the resistance of each one cannot exceed by 10% each other.
3. Heater is hard and brittle, please be careful when assembling and maintaining so as to avoid damage.
4. When operating the electric furnace at the beginning, the voltage should be increased slowly and cannot be fully loaded at once. Otherwise the larger current will be resulted in the damage of heater.
5. When heater is damaged and need to be changed, the resistance of new one should follow the increasing resistance. If many are damaged or resistance increased too much, heater should be changed.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Importer,Exporter
Year Established:
2007
Total Annual:
5000000-8000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Henan ZG Industrial Products Co. Ltd. was founded by specialists of leading industrial institutes in Zhengzhou city, China in 2007. Our company manufactures, complex develops, supplies, introduces and upgrades products from technical ceramics, heating elements and graphite. We provide servic... Henan ZG Industrial Products Co. Ltd. was founded by specialists of leading industrial institutes in Zhengzhou city, China in 2007. Our company manufactures, complex develops, supplies, introduces and upgrades products from technical ceramics, heating elements and graphite. We provide servic...
Get in touch with us
Leave a Message, we will call you back quickly!