1 - 5 Ton Output Wood Steam Boiler For Garment Industry , Textile Factory

Product Specification

1 - 5 Ton Output Coal / Wood / Biomass Fired Steam Boiler For Garment Industry

General introduction

Biomass steam boiler is a horizontal three-pass water and fire tube hybrid steam boiler. A bunch of threaded smoke pipes are arranged in the drum. The left and right sides of the furnace are equipped with light pipe water-cooled walls. Light chain grate is used to realize mechanical coal feeding It is equipped with blowers and induced draft fans for mechanical ventilation, and is equipped with a scraper type slagging machine to realize automatic slag discharge. The front and rear arches of this series of steam boilers adopt new energy-saving technology arches. The fuel falls from the coal scuttle to the grate and enters the furnace. After burning, the flame refracts upward through the back arch and passes through the burning chambers on both sides of the body to turn to the front smoke box, and then fold back from the front smoke box to the tube bundle in the pot, enter the economizer through the rear smoke box, and then be drawn through by the induced draft fan. The flue to the chimney is exhausted to the atmosphere.

1. Single cylinder, fire tube (Spirally corrugated tube) and water tube.

2. Packaged style

3. Fuel can be wood,firewood, logs,waste.etc.

4. Hand fired type.

5. Capacity 1Ton-6Ton/HR

6. Design pressure:1.0Mpa(10bar),1.25Mpa(13bar),1.6Mpa(16bar)

7. Stem temperature:184C,194C,204C

8. Equipped with full set auxiliaries, after simple installation, the boiler can operate.

Performance characteristics:

1. The biomass fired boiler is a horizontal fast-installed steam boiler with natural circulation of working fluid. The steam boiler heat exchange system consists of a drum, left and right headers, and water walls. The main heating surface has a water wall in the furnace, and part of the drum and the drum have convection. Tube bundle. This series of steam boilers are composed of five parts when they leave the factory: the main body of the boiler, the flue duct, the dust collector, and the piping system. The first four parts have been manufactured in the factory and can be transported to the installation site for assembly, which can be greatly shortened Installation cycle, and can guarantee the quality of product installation.

2. High-quality boiler design performance: The main heating surface of the steam boiler is made of seamless steel pipes for 20# low and medium pressure boilers, and the drum is made of special steel plates for the boiler. The left and right headers are made of seamless steel pipes.

3. The steam boiler arch is made of refractory concrete. The back arch is low and long, so it burns well. The two-wing flue and side wall bricks are made of refractory sintered bricks. The front and back walls of the boiler are made of general-purpose refractory bricks.

4. The wood steam boiler grate has reasonable air distribution, large combustion chamber, and strong applicability of coal types. It is suitable for all kinds of bituminous coal, anthracite, and mixed coal. It burns fully. Because the high-temperature flue gas enters the settling chamber, it enters the two-wing flue from both sides, The front smoke box, so the smoke and dust removal effect is good.

5. The water cycle is simple, and the structure of the pressurized parts is reasonable, and it is completely safe to operate under the condition of ensuring water quality.

6. The boiler combustion equipment is a quick-installed grate. The combustion equipment is manufactured and installed in the factory and can be directly installed on the foundation after being transported to the construction site. It has a reasonable and compact structure and low steel consumption, which makes the performance, weight and structure of the boiler Compared with domestic boilers of the same capacity, the size has obvious advantages.