1MW 1000000kcal 1200kw Fuel Diesel Gas Organic Heat Carrier Coil Heater Thermal

Product Specification

1MW 1000000kcal 1200kw Fuel Diesel Gas Organic Heat Carrier Coil Heater Thermal Oil Boiler For Cement Plant​

YY(Q)W series thermal fluid boiler heater has skid-mounted design and full automatic control system. The heat carrier is thermal fluid oil, boiler's working pressure ≤1.0MPa, working temperature ≤310℃. Adopting three-pass structure, 3 layer corrugated coil rings.

Free-Installation

The complete boiler system is well skid-mounted on the basement, also we have done the pipe(valves) connection and wire connection. After receiving the boiler, user no need to do installation, just filling the thermal fluid oil, join the fuel and electricity. Entire boiler system is portable.

Technique data:

Rated thermal power is 0.12Mw (10×104kcal/h) to 14Mw (1200×104kcal/h).

Design pressure is equal to or greater than 1 Mpa.

Operating temperature is equal to or less than 350°C.

Thermal efficiency is between 60% and 85% according to the difference of boiler type.

Characteristics of oil-fired heat-conducting oil boiler

1. The seal between the burner interface and the tube plate adopts a labyrinth type, which has good sealing performance and large expansion space, which prolongs the service life of the burner and improves the thermal efficiency.

2. The thermic fluid heater adopts two-coil structure, three-pass flue gas, compact design, saving space, adding air preheater, and thermal efficiency up to 92% or more.

3. Various operation safety protections make the boiler operation safer and simpler, with high temperature control accuracy (±1℃) and good combustion effect.

4. The automatic control function is adopted to prolong the service life of the equipment while saving human resources.

5. Hot Oil Boiler can obtain a higher working temperature under a lower operating pressure, and has the technical characteristics of low pressure and high temperature.

6. It has complete operation control and safety monitoring devices, easy to operate, safe and reliable.

7. It can realize stable heating and precise temperature adjustment to meet different requirements

8. The thermal oil boiler has good thermal insulation, adopts high-efficiency thermal insulation materials and advanced construction technology, and has low heat dissipation loss on the furnace wall.

Technical Parameters:

oil fired thermic fluid heater hot oil boilerThe Gas/Oil Fired thermal oil boiler auxiliaries :

This thermal oil boiler takes heat carries oil as medium and uses the hot oil circulating pump force the medium to make liquid circluation ,then the thermal energy will be transmitted to the devices and back to furnace to be reheated. so the boiler can get higher working temperature at low pressure ,and make a better usage of heat , it is a kind of safe boiler with high efficiency and low power consumption this series boiler have advinced program control system, equiped with liquid level controller,pressure controller ,temperature controller ,and alarms to make sure the boiler work orderly and safe.so it is a kind of safe boiler with high efficiency and low power consumption .

Boiler Application

industrial thermal oil heater for non-woven hot rolling mill heating

It can be applied in the following areas: high-temperature shaping, plate heating, rubber, drying, dyeing and printing, chemical industry, plywood production, rolled water-proof material production, asphalt heating, non-woven hot-rolled machine, fiber, glass hot press machine, reactor, mould, drying room, oven, and other heating industries.