10Ton Waste Engine Oil / Motor Oil Recycling To Diesel Machine Used Oil

Product Specification

10Ton Waste Engine Oil / Motor Oil Recycling To Diesel Machine Used Oil Purification And Filtering Equipment

used motor oil to diesel fuel oil distillation plant can process waste engine oil, used motor oil, black oil, tire oil, plastic oil to clean diesel. This kind of diesel can be used to tractors, trucks, diesel oil generator, power generator etc. Oil recovery average rate: 85%-95%. Unique design and outstanding functions can help customer create more profit. This equipment is matched with pyrolysis plant. It is widely applied in waste oil management industry.

Input capacity: 5ton-30ton
Output capacity per day: 3ton-10ton
Fuel for heating: coal / wood / natural gas / distillate oil

Installation cover area: 300-400 square meters

Workers: need 2-3 workers for machine operation

This Waste Engine Oil Distillation Machine will need one-time catalyst which is produced by our company only, there is no need to buy from other catalyst factory as we have the catalyst formula .it is customized.

The pyrolysis oil with black color after distillation and remove color and smell , we will get synthetic diesel oil with yellow color,which can be used for diesel engines like trucks , tractors , ships etc.

Technical Specification

Working process of waste engine oil distillation machine

Working Process

1. Heat the heat conduction oil with the heat conduction oil furnace;

2. The heat conducting oil flows into the coil in the distillation reactor and heats the waste engine oil in the distillation reactor;

3. When the waste engine oil is heated to a certain temperature, the reactor is directly heated with fuel. As the temperature increases, the waste engine oil produces oil and flows into the buffer tank. The odorous light components in the waste engine oil can be distilled and collected into the distillation tank.

4. The oil gas from the buffer tank enters the catalytic tower. In the catalytic tower the macromolecular oil gas are broken down into smaller molecules .

5. Oil gas of small molecules enter the cooling system through the catalytic tower and are cooled into liquid oil;

6. After the oil gas steam out, the distillation reactor memory has plenty of hot asphalt, which can be extracted by the asphalt pump.

The main list of waste oil distillation equipment
A. Vertical reactor/Horizontal reactor
B. Reducer system
C. Condensation system
D. Collector
E. Oil collecting tank
F. Residue tank
G. Oil-gas separator
H. Water cooling system
I. Water seal
J. Pressure & Temperature monitoring gauge
K. Deodorization system
L. Efficient anti clog cooling system
M. Gas heating system (waste gas process system)
N. Smoke desulphurization and dust removal system

Advantage of used engine oil to diesel recycling distillation plant

1.The waste oil vacuum distillation unit is designed as a continuous production process, and the waste oil is pumped into the preheating system by vacuum. After heating, it is automatically sent to the still (normal temperature-380 °C end) . The vacuum adjustment in-0.03 MPA can get about 80% of the fuel oil (diesel) base oil production (the requirements of the raw oil and the production of fuel oil vacuum should be controlled in-0.08 MPA) , the use of one-time feed mode of production, with the change of temperature, after the gas is purified in the gas tower, the gas enters the condensing system of the equipment. When the gas passes through the first stage of condensing, 95% of the oil gas is converted, and then enters the second stage of condensing. The remaining 3%-5% of the gas is converted, it then goes into a three-stage vertical condenser to prevent a small amount of the gas from not being converted. That is, the unconverted gas enters the oil-gas separation system. And then it goes into the furnace to ignite it.
2.Negative pressure environmental protection type: no smoke, no smell and no secondary pollution in the production process; in order to meet the standard of environmental protection emission, the burned gas is further purified, the crack pipe is cooled by condensation, then the crack pipe is sprayed by two stages to remove dust, then the crack pipe is separated by gas and water, finally the crack pipe is decomposed by UV light to eliminate the harmful substances completely, which meets the national emission standard.
3.The equipment can be operated using fuel oil or natural gas as heat source (heating with non-condensable gas in the production process to save fuel)

After-sales service

1.Engineers with over ten years’ waste to oil recycling experience will be dispatched to your place to provide technical service in guiding plant installation, plant commissioning as well as worker training.

2.We all know that good plant design and quality are essential, and good installation and training service are as important as or even more important than good plant design and quality. It is very dangerous if clients can not install or run the plant properly.

3.So, after plant installation finishes, our engineers are required to help you run the plant for at least 15 batches, enabling your workers to master all the operating skills needed and then operate the plant on their own.

FAQ of waste engine oil distillation machine

1. Who has run the waste tire/plastic to oil recycling pyrolysis machines?
A: The waste tire/plastic to fuel recycling pyrolysis machines have been installed in 25 countries all over the world.

2. What can I get from the machines?
A: From 10T pyrolysis machine, you can get 4-5T tire oil or 2T-7.5T plastic oil, 2.5-3T carbon black, 1.5-2T steel wire, 5%-10% syngas.

3. How much profit do I get from the pyrolysis machine? What's in it for me?
A: This machine can get you hundreds to over 1,000USD profit gross profit per day.
The accurate profit varies with your local raw material cost, amount and your output selling price. If you provide these prices, we can give you a specific profit analysis report.
By the way, the more tyre/plastic you process per day, the lower the average management cost and the more profit you get.

4. What matter most to this waste tire/plastic to oil recycling pyrolysis business?
A: Safety. It's the most important thing in this high-profit oil gas business.
Environment friendly
Energy-saving
Installation&worker training
Technical support&update
Service

Successful Case

The output oil its color is looks like this picture shows.

This oil is made from waste engine oil.
The color is clean and light, can add this oil into engines and generators directly.

if you are planning to recycle the waste tires pyrolysis oil into diesel, the final output oil its color is a little big dark thank the picture shows.
Tire diesel need to be mixed with standard diesel, then can add the mixture oil into marine engines, tractors, farming engines, forklift cars...etc.