30ton 50ton Fully automatic Continuous Scrap Tyre Recycling To Oil Pyrolysis

Product Specification

30ton 50ton Fully Automatic Continuous Scrap Tyre Recycling To Oil Pyrolysis Machine

The fully continuous pyrolysis equipment can continuously feed, and the oil residue after cracking can be slag discharged without stopping the heating and cooling; The whole process is carried out at the same time while feeding the material and discharging carbon black at the same time, eliminating the need for cooling and slag discharge and other links. Preheating works continuously for more than ten days or even dozens of days. While improving productivity, it reduces the number of preheating times. , energy saving and high efficiency.

Raw Materials:
Scrap tires/rubber : One of the main components of tires is rubber. Various scrap tires and rubber materials can be used in oil production, rubber cable jackets, rubber soles and all other types of rubber sheets or carpets. For example, the oil yield of large car tires, truck tires, and engineering vehicle tires is 45%-52%; the oil yield of small car tires, motorcycles, and bicycle tires is 35%-40%; The oil rate is about 35%; the oil rate of various rubber sheets or carpets is 30%; the oil rate of unclassified rubber is about 35%.
Waste plastics: With the exception of PVC and PET, almost all other plastics can be pyrolyzed to make oil. For example, the oil yield of pure PP, PE, PS can reach more than 90%; the oil yield of ABS is more than 40%; the oil yield of pure white plastic sheet is about 70%; the oil yield of instant noodle packaging bags is 40%; The oil rate is 20%; the oil yield of wet papermaking waste is 15%-20%; the oil yield of dry papermaking waste is 50%; the oil content of plastic household waste is 30%-50%; pure plastic cable sheath The oil yield is 80%; the oil yield of pure plastic bags is 30%.
Sludge: There are bottom sludge, tank bottom sludge, refinery sludge, crude oil sludge, petroleum sludge, engine sludge, etc. The oil content of different sludge materials determines the oil yield.

Technical Specification

The used tire to fuel oil production line working process :

feed raw material (belt conveyor)-- heat(reactor)-- oil gas comes into being-- impurity deposits (gasseparate)--heavy oil deposiys(depositing tank)-- cooling down(cooling pool)-- get light oil(light oil tank)--flammable gas reheat reactor--take out carbon black(screw conveyor)

Main feature of continuous pyrolysis plant 

1. catalyst chamber - reduce speed of oil gas; improve oil quality

2. oil-water separator - avoid oil gas being back to reactor for safety

3. cooling system (cooling pipe and vertical condensers / horizontal condensers) -better condensing effect, more oil you will get

4. oil tanks - collect oil

5. anti-back fire device - recycle tail gas to furnace as fuel; second water closing for safety

6. negative pressure device - guarantee working under normal pressure safety; shorten pyrolysis time; environment protection.

7. dust removal system - ensure the smoke reach national emission standards

8. auto-feeder - shorten feeding time; feed more raw material; save workers.

Advantages

1.Fully automatic and 24 hours continuous production adopting advanced technology can produce good quality fuel oil.
2.Full Automatic,no need labor ,high-temperature and enclosed discharging,which is enviromental-friendly,clean and dust-free.
3.Unique anti-sticking devices ,which can achieve continuous production of special materials.
4.Large capacity with 20-50 tons per day ;Durling production,there is no need for fule because the non-condensable gas produced by pyrolysis can support the whole process of production.
5.Environmental-friendly and pollution-free(general hazardous waste processing standards),with national patent smoke scrubbers which can remove acid gas and dust from smoke.

Picture Details