Industrial Pressure Washing Equipment For Heat Exchanger Pipes Cleaning 2500bar

Product Specification

Industrial Pressure Washing Equipment For Heat Exchanger Pipes Cleaning 2500bar

Thanks for using Lifeng serials high pressure industrial washers. We produced these series washers according to the special conditions of industrial cleaning. We self-design and produce the high quality products by using the advanced technology and processing methods. It is reasonable in structure, easy in operation and is durable in use. It widely used in removing sand, paint, dirty stuff, colloid of castings. It gets a good reputation in sugar-refinery, pharmaceutical factory, cement plant, construction, chemical engineering, petroleum, and shipping.

Diesel Industrial High Pressure Washers High Pressure Washing Machine For Pipelines Cleaning,This equipment needs to use a backflush nozzle to go inside to the pipes.the nozzles should be smaller than the heat exchangers pipes.

when start the high pressure cleaning machine,the backflush nozzles can go into the pipes itself by the water jet push power.

then the nozzles water jet can clean the inside of the pipes.

75KW Industrial High Pressure Washers For Heat Exchanger Pipes Cleaning 75KW High Pressure Washing Machine

• The structure:

The main parts are: triplex high pressure reciprocating pump, diesel engine, water tank,oil tank, inlet water hose, and cleaning accessory, electric control cabinet.

• Triplex high pressure reciprocating pump: It is triplex plunger pump, and the working principle and maintenance please see the operation manual of high pressure pump.
• Water tank: water tank is the device of storing water and filter. There are two filtering clapboards, and it should check for some times. The place of the water must higher than the high pressure pump, in order to exclude the air of inlet pipeline.

4. Cleaning accessory: there are many kinds of cleaning accessory; it should match according to the client’s request. The usual are: high pressure hoses, high pressure pipes, foot control valve, spray guns, etc.

High pressure hoses are the main safe parts of the washer; it must use the supporting products. Before use, it must be checked, and if there are some wearing parts, it should be rechanged. Fixed the joint, in case of loosing.

The high pressure pipes usually in a fixed place, which made from the stainless steel extra high pressure, and installed in a fixed pipe way. When installation, it should match with the limit valve and globe valve, and control box.

Foot control valve is used in the pipelines, containers, rotary kiln of cement plant, sometimes used in as the twin gun switch valve operation. When use the special accessories such as spray boom, rotating nozzle, it should use the foot control valve to realize the control of water jet change. When loose the valve, the water jet.

Spray gun is the washer’s change energy parts, for considering the safety, usually, it is overflow spray guns, that means there is a overflow pipe, when close the spray gun, it overflows, and unloading the high pressure pump.

 
Company infomation:

we are a 40 years manufacturing factory which located in Chengdu China,famous for the pandas.

we have enough manufacturing experience to supply the high quality products to all over the world customers.

Industrial Pressure Washing Equipment For Heat Exchanger Pipes Cleaning 2500bar

Characteristics as below:

Industrial Pressure Washing Equipment For Heat Exchanger Pipes Cleaning 2500bar

As a 40 years manufacturing factory,we have many years all come from all over the world,the below are some of our customers,they are from Australia and so on......

 
Applications:
 
it is widely used in ship cleaning,rust removing,concrete removing ,fuel pipeline cleaning in refinery fields,oil tank clean,all kinds of the heat exchangers pipes clean,cment plant kiln,for the papaer making factory which is cleaning the dirty paper pulp......
 

 
 
 
Comments from customers who is using the products 75KW Industrial High Pressure Washers For Heat Exchanger Pipes Cleaning 75KW High Pressure Washing Machine:


 
 
Comments from customers:

 
 
 
 
FAQ

Industrial Pressure Washing Equipment For Heat Exchanger Pipes Cleaning 2500bar

 
Q1. What is  leading time?
A: We need 30 days to deliver.

Q2.are you a factory or a trading company?
A: we are a 40 years old manufacturing factory which located in Chengdu ,China.
 
Q3. How do you ship the goods ?
A: Ship by  sea shipping.
 
Q4. How to proceed an order for the product?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly:we sign a contract
Fourthly We arrange the production.
 
Q5. Is it OK to print my logo on the product?
A: Yes. Please inform us formally before our production.
 
Q6: Do you offer guarantee for the products?
A: Yes, we offer 1 years warranty to our products.