Melan Measurement & Control Instruments (Shanghai) Co.,Ltd.
| Payment Terms | T/T |
| Supply Ability | 10000 units per month |
| Delivery Time | 7-10 working days |
| Packaging Details | In carton |
| Velocity range | 0.1m/s~5m/s |
| Accuracy | ±2% |
| Output | 4-20mA, OCT, RS485 |
| Temperature | 0~50C |
| Pipe Size | DN10-DN50 |
| Power Supply | 24VDC |
| Brand Name | |
| Model Number | ML-F8 |
| Place of Origin | China |
View Detail Information
Explore similar products
Wall Mounted DN25 RS232 12m/S Clamp On Flow Meter
LCD Transit Time DN1200 IP65 Ultrasonic Flow Meter
Waterproof Transit Time DN1200 External Pipe Flow Meter
600Ω Load DN15 Clamp On Ultrasonic Flow Meter
Product Specification
| Payment Terms | T/T | Supply Ability | 10000 units per month |
| Delivery Time | 7-10 working days | Packaging Details | In carton |
| Velocity range | 0.1m/s~5m/s | Accuracy | ±2% |
| Output | 4-20mA, OCT, RS485 | Temperature | 0~50C |
| Pipe Size | DN10-DN50 | Power Supply | 24VDC |
| Brand Name | Model Number | ML-F8 | |
| Place of Origin | China | ||
| High Light | Clamp On Ultrasonic Energy Meter ，DN50 Ultrasonic Energy Meter ，0.1m/s Ultrasonic Energy Meter | ||
Clamp On Ultrasonic Energy Meter / Heat Meter for Small Pipes
I INTRODUCTION
ML-F8 is very unique in its structural design. It uses a circular magnetic steel to achieve automatic connection during installation.It takes only 2-3 minutes to complete the whole process from installation to measurement. It also adopts the current popular OLED display, which makes it easy to read in low light conditions.
ML-F8 is widely used in the production process for flow measurement and monitoring. The application of the product continuously and effectively controls the flow of the fluid, so as to improve the yield of the product and even save the input of the personnel, bringing benefits to the production enterprise.
II. SPECIFICATION
| Model | ML-F8 |
| Velocity Range | 0.1 m/s ~ 5.0 m/s |
| Accuracy | ± 2.0% |
| Repeatability | 0.80% |
| Pipe Size | DN15,DN20,DN25,DN32,DN40,DN50 |
| Data Storage | Daily, Monthly, Yearly Totalizer |
| Analog output | 4~20mA, Maximum load: 600Ω |
| Alarm output | OCT, Upper and lower limit alarm function (for option) |
| Communication | RS485,support Modbus communication protocol |
| Power Supply | 24VDC |
| Cable Length | 1.8m |
| Keypad | Four light touch buttons |
| Screen | OLED 128*64 screen display |
| Units | Metric and imperial units are available Cubic Meters(m3), Liters(L),USA Gallons(GAL)/hour, USA Gallons(GAL)/min Default unit setting: m3/h |
| Totalizer | Six bit digit |
| Piper Material | Stainless steel pipe, carbon steel pipe, PVC |
| Case Material | Aluminum alloy |
| Environment Temp. | 0℃-50℃ |
| Medium Temp. | 0℃-50℃ |
| Environment Humidity | 0-95% relative humidity, without condensation |
| IP Grade | IP54 |
III. PIPE SPECIFICATION
| Size | DN15 | DN20 | DN25 | DN32 | DN40 | DN50 |
| Nominal Pipe Diameter Size | 15mm | 20mm | 25mm | 32mm | 40mm | 50mm |
| Pipe OD | 20mm | 25mm | 32mm | 40mm | 50mm | 63mm |
| Pipe ID | 15mm | 19mm | 26mm | 33mm | 43mm | 55mm |
| Inch | 1/2’’ | 3/4’’ | 1’’ | 1.2’’ | 1.5’’ | 2’’ |
Ultrasonic flow meters use sound waves at a frequency beyond the range of hearing (typically 0.5, 1, or 4 MHz). This ultrasound signal is sent into a stream of flowing liquid by using wetted (insertion) transducers that make direct contact with the liquid or external (clamp-on) transducers that send the ultrasound through the pipe wall. Clamp-on ultrasonic flow meters allow users to measure the volumetric flow rate of a fluid in a pipe without having to penetrate the pipe which decreases installation and maintenance costs.
Ease-of-Installation: The largest benefit of any “clamp-on” transit-time flow meter is the ease-of-installation. While still requiring sections of straight pipe upstream of the measurement location, the process does not require shutting the system down to install, making maintenance and upkeep of transit-time meters much more attractive.
Low maintenance: There are no blades to wear out or bearings to replace as in turbine meters, nor are there electrodes that can foul over time as in magnetic flow meters.
V. COMPONENT PARTS
Company Details
Business Type:
Manufacturer,Exporter
Year Established:
2019
Total Annual:
$1000000-$2000000
Employee Number:
>50
Ecer Certification：
Site Member
Melan Measurement & Control Instruments is located in Shanghai City. It is a high-tech manufacturer specialized in the design, development, manufacturing and sale of measurement and control instruments. Our products are widely used in various fields, including electricity, chemical ... Melan Measurement & Control Instruments is located in Shanghai City. It is a high-tech manufacturer specialized in the design, development, manufacturing and sale of measurement and control instruments. Our products are widely used in various fields, including electricity, chemical ...
Get in touch with us
Leave a Message, we will call you back quickly!