China Abrasives Industry Hainan Corporation
| Supply Ability | 100 sets per month |
| Delivery Time | 15-20 days |
| Packaging Details | Standard package for export |
| Brand Name | CAEC |
| Certification | ISO9001, ISO14001, OHSAS18001 |
| Place of Origin | China |
View Detail Information
Explore similar products
Product Specification
| Supply Ability | 100 sets per month | Delivery Time | 15-20 days |
| Packaging Details | Standard package for export | Brand Name | CAEC |
| Certification | ISO9001, ISO14001, OHSAS18001 | Place of Origin | China |
| High Light | QPQ Salt Bath Nitriding ，OHSAS Salt Bath Nitriding ，QPQ Equipment | ||
QPQ Salt Bath Nitriding QPQ composite processing technology
After 10 years of experimental research, CAEC successful developed the second generation of QPQ technology - deep QPQ technology. The thickness of compound layer was increased from the original 15 ~ 20 microns to more than 30 ~ 40 microns. Picture 1 shows Metallographic photos for Deep QPQ treatment and general QPQ technology treatment
It has been proved by abrasion resistance test, corrosion test, mechanical property test and permeability layer microstructure test that component compound layer thickness is multiplied and work piece’s various performances are greatly improved after second generation QPQ treatment.
Wear resistance: sliding wear after deep QPQ treatment on 45 steel demonstrate that wear resistance is four times that of ordinary QPQ treatment. Work-piece rolling wear experiment shows similar results.
Corrosion resistance: after deep QPQ treatment of 45 steel corrosion resistance of weightlessness experiment is 12 times increase compared to traditional QPQ treatment.
Corrosion resistance is more than 1 times higher. If combined with sealant, the corrosion resistance of salt spray test can reach more than 300 h or even higher.
Impact toughness: impact toughness after deep QPQ treatment on 45 steel is 1.98 times higher than ordinary QPQ treatment.
Table 1
Performance Comparison between Deep QPQ treatment and general QPQ technology treatment
| Treatment Method |
Sliding Wear Test
|
Weight-Loss Test |
Impact Toughness Test
|
|||
| Wear /g |
Wear resistance Ratio
|
weight lose /g | Corrosion Resistance Ratio | Impact Energy /h |
Toughness Ratio
|
|
| QPQ processing | 0.538 | 1 | 20.99 | 1 | 12.2 | 1 |
| Deep QPQ processing | 0.133 | 4.05 | 1.67 | 12.7 | 24.2 | 1.98 |
QPQ Equipment Series Table
| Equipment model |
Crucible Inside Size
|
Furnace Dimensions
|
Furnace Power
|
Remark |
| 300 type | Φ300×500 | Φ900×900 | 15KW |
With control cabinet, thermocouple and compensating conductor
|
| 500 type | Φ500×700 | Φ1200×1100 | 25KW | |
| 800 type | Φ800×950 | Φ1400×1400 | 50KW | |
| 1000 type | Φ1000×1200 | Φ1700×1600 | 75KW | |
| Deep type | Φ650×2500 | Φ1350×3200 | 72KW | |
| Extra deep type | Φ700×3250 | Φ1400×3900 | 120KW |
Remarks: Customized request is available
QPQ salt bath composite processing special salt series table
| category | QPQ Special Salt | Options Available | Technical characteristics | Remarks |
| ordinary | Basic Salt | Powder and block |
suitable for most ferrous metal materials, significant effect will be achieved especially for medium carbon steel, medium carbon alloy steel and other materials, and treatment cost is relatively low |
Block refers to salt block that is caused by oxidation in salt moisture and the initial melting of the salt |
| Adjusting Salt |
powder
|
|||
|
Oxide Salt
|
powder | |||
|
Second generation |
Second Generation Basic Salt | Powder and block |
Applicable to majority of ferrous materials, especially for high alloy steel, stainless steel and other materials. Effect will be enhanced significantly. Depth of nitride layer, layer hardness and resistance to corrosion will be improved compared to ordinary treatment.
|
|
| second generation adjusting salt | Powder and block | |||
|
powder
|
||||
| High-temp Salt | chunks | Usage temperature 540℃—570℃ | ||
| Low-temp Salt | chunks | Usage temperature 525℃—535℃ |
Company Details
Business Type:
Manufacturer,Importer,Exporter,Trading Company,Seller
Year Established:
1988
Total Annual:
200000000-400000000
Employee Number:
100~200
Ecer Certification：
Verified Supplier
China Abrasives Industry Hainan Corporation, the predecessor was China Abrasives Import & Export Corporation, which was approved by the former National Machinery Commission and the State Import and Export Management Committee and founded in 1981. It's a leading enterprise in the import and e... China Abrasives Industry Hainan Corporation, the predecessor was China Abrasives Import & Export Corporation, which was approved by the former National Machinery Commission and the State Import and Export Management Committee and founded in 1981. It's a leading enterprise in the import and e...
Get in touch with us
Leave a Message, we will call you back quickly!