Diamond Segment 35A Induction Brazing Machine 16kw Electric High Frequency

Product Specification

16kw Bearing High Frequency electric diamond segment Induction Brazing Machine

1. Performance characteristics of high frequency induction heating equipment:
1. Modular design: Adopt drive module control to ensure the reliability of the equipment and easy maintenance.
2. Digital phase-locking: The digital phase-locking technology is used to realize automatic frequency tracking, which can automatically adapt to various sensors.
3. Resonance frequency conversion technology: The use of resonance frequency conversion technology makes the overall efficiency of the equipment ≥90%, high efficiency, energy saving, and the power consumption is only 20%-30% of the electronic tube induction heating equipment.
4. All solid state: IGBT device is used for inverter, high frequency, small size and light weight.
5. Safe and reliable: The equipment has no ten thousand volts high voltage, the operation is safe, and it can work continuously for 24 hours.
6. Fool design: easy installation, no debugging, easy to use.

2. Technical Parameters of LSW-16 Induction Heating Machine:

3. Main characteristics of LSW-16 Induction Brazing Machine :

1). MOSFET power component and current inverting technologies have been used.
2). simple structure and light weight.
3). simple to operate, a few minutes is enough to learn it.
4). simple to install, installation can be done by unprofessional person very easily.
5). multi-display functions, with displays of over current, over voltage, water failure, phase failure and unfit lad and so on, machine can be protected from destroys and machines can be repaired easily.
6). light weight, small size.
7). different shape and size of induction coil can be changed easily to heat different parts.

4. Application area of induction brazing machine:

Portable high frequency induction brazing machine has the advantages of small size, light weight, low failure rate, energy saving, and the welded joints are firm and beautiful. The geometry of the welded parts is not limited, the surface pattern will not be damaged, the internal crystal structure of the metal is unchanged, and the annealing range is small. Without obvious welding scars, it is widely used in the welding and annealing of heat treatment industry, water-cooled sanitary ware industry, hardware tool welding industry, electrical and electronic industry.

1. Penetration forging of round steel.
2. shaft and other mechanical parts quenched.
3. machine tool guide quenching.
4. Quenching of auto parts and motorcycle parts.
5. pliers, wrenches, screwdrivers, hammers, axes and other parts heat treatment.

5. Advantage of high frequency induction brazing machine:
1. Fast heating speed: induction heating, no oxide layer, small deformation;
2. Using IGBT module, energy saving and power saving: 30% power saving than electronic tube type, 20% power saving than thyristor intermediate frequency;
3. Full protection: There are alarm indications such as overvoltage, overcurrent, overheating, water shortage, etc., and automatic control and protection.
4. Small size: the split structure is adopted, which is light in weight and convenient for mobile installation;
5. The effect is good: the heating is very uniform (the temperature of each part of the workpiece can be obtained by adjusting the density of the induction coil), the temperature rises quickly, the oxide layer is small, and there is no waste after annealing;
6. Strong adaptability: can heat a variety of workpieces;
7. The temperature and heating time can be accurately controlled, and the processing quality is high.
8. Environmental protection: no pollution, noise and dust;