Zimmer Screw-Vent® Impression Coping Transfer Closed/Open Tray Compatible NP 3

Product Specification

Titanium Zimmer Screw Vent Hex Dental Implants Abutment

Zimmer Screw-Vent® Impression Coping Transfer Closed/Open Tray Compatible

NP 3.5mm/ RP 4.5mm/ WP 5.7mm

Material:

Ti 6AI-4V ELI (Supply from Germany)

Feature:
- Titanium interface abutment
- Precision machined up to ± 5µm
- Combination of high fatigue strength
- Superior level of biocompatibility
- Exterior retentions for more cementation bonding

Approved by CE, ISO 9001, ISO 13485

Points of Zimmer Tapered Screw-Vent® (TSV), Screw-Vent® Impression Coping Transfer:

Implants are pre packaged with a multi purpose fixture mount (Fig.1), this fixture mount may be utilized as a indirect impression coping. The fixture mount/impression copings are fabricated with a emergence profile 1mm larger than the platform diameter of the implant.

Indirect engaging, fixture level impression copings (Fig.2) for the indirect impression technique are color coded in compliance with the color coding scheme of Screw-Vent® implants. Green signals the 3.5mm platform and purple indicates the 4.5mm platform diameter while yellow corresponds to the 5.7mm platform.

Impression copings consists of a symmetrically machined impression coping body and separate screw. The screw should be flush with the impression coping body once fully seated on to the implant. Each platform group impression coping is machined in several emergence profiles with the exception of 5.7mm platform impression copings. 3.5mm platform impression copings are available with emergence profiles of 3.5 (catalog # HLT3/3), 4.5 (catalog # HLT3/4) and 5.5mm (catalog # HLT3/5) while 4.5mm platform impression copings are produced with emergence profiles of 4.5 (catalog # HLT4/4), 5.5 (catalog # HLT4/5) and 6.5mm (catalog # HLT4/6). The 5.7mm platform impression coping is produced in a single emergence profile of 6mm (catalog # HLT5/6).

Direct engaging, fixture level impression copings (Fig.3) for the direct impression technique are color coded in compliance with the color coding scheme of Screw-Vent® implants. Green signals the 3.5mm platform and purple indicates the 4.5mm platform diameter while no direct impression copings are available for 5.7mm platform implants.

Impression copings consists of a symmetrically machined impression coping body and separate screw. The screw extends past the impression coping body once fully seated on to the implant. Each platform group impression coping is machined in several emergence profiles. 3.5mm platform impression copings are available with emergence profiles of 3.5 (catalog # DHT3/3), 4.5 (catalog # DHT3/4) and 5.5mm (catalog # DHT3/5) while 4.5mm platform impression copings are produced with emergence profiles of 4.5 (catalog # DHT4/4), 5.5 (catalog # DHT4/5) and 6.5mm (catalog # DHT4/6).

Abutment level impressions for already installed titanium Hex-Lock® abutments are carried out with color coded plastic impression copings (Fig.4). The color coding of the plastic impression copings does not comply with the general platform color coding of the Screw-Vent® implant system but is designed to indicate the emergence profile of the installed Hex-Lock® abutment. Blue represents a 3.5mm emergence and orange signals a 4.5mm emergence profile while red designates a 5.5mm emergence profile impression coping. Yellow represents the largest emergence profile of 6.5mm. All four emergence profile impression copings are produced for straight (catalog # ZOCIMP3S, ZOCIMP4S, ZOCIMP5S, ZOCIMP6S) and angled (catalog # ZOCIMP3A, ZOCIMP4A, ZOCIMP5A, ZOCIMP6A) abutments separately. Complete kits including the impression coping, analog, temporary coping and burnout coping are also sold (straight catalog # ZORKIT3S, ZORKIT4S, ZORKIT5S, ZORKIT6S and angled catalog # ZORKIT3A, ZORKIT4A, ZORKIT5A, ZORKIT6A).

Abutment level impressions for already installed short titanium Hex-Lock® abutments are carried out with color coded plastic impression copings (Fig.5). The short titanium Hex-Lock® abutment impression copings are not compatible with regular Hex-Lock® titanium abutment impression copings. Color coding of the plastic impression copings does not comply with the general platform color coding of the Screw-Vent® implant system but is designed to indicate the emergence profile of the installed short Hex-Lock® abutment. Orange signals a 4.5mm emergence profile while red designates a 5.5mm emergence profile and yellow indicates the largest emergence profile of 6.5mm. Impression copings are offered as a kit, including the color coded plastic impression coping, plastic analog, temporary and waxing coping. (catalog # SAKIT4, SAKIT5, SAKIT6)