Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 15 set/ month |
| Delivery Time | 20 Days |
| Packaging Details | Plywood |
| Bowl | (φ35-φ25)*10mm,are made of stainless steel |
| Splash structure lifting stroke | 1m |
| Pressure gauge | 0.4Mpa |
| Standard | IEC60335-2-64 clause 15.1.1 and 15.1.2 |
| Brand Name | HongCe |
| Model Number | SW-1 |
| Certification | TUV、ITS、CSA、BV、SGS 、CNAS(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 60745-2-1 Electric Hammer Durability Test Apparatus Steel Ball Diameter 38mm
IEC 60811 Natural Convection Oven Heating Chamber 8-20 Air Changes Per Hour
IEC Testing equipment Inductive Load Bank With 3 Test Stations Output Current
IEC 60745-2-5 Testing Equipment For Circular Saw Switch And Lower Guard
Product Specification
| Payment Terms | T/T | Supply Ability | 15 set/ month |
| Delivery Time | 20 Days | Packaging Details | Plywood |
| Bowl | (φ35-φ25)*10mm,are made of stainless steel | Splash structure lifting stroke | 1m |
| Pressure gauge | 0.4Mpa | Standard | IEC60335-2-64 clause 15.1.1 and 15.1.2 |
| Brand Name | HongCe | Model Number | SW-1 |
| Certification | TUV、ITS、CSA、BV、SGS 、CNAS(cost additional) | Place of Origin | China |
| High Light | iec tester ，laboratory test equipment | ||
IEC60335-2-64 Clause 15.1.1 IEC Test Equipment Splash Water Test Device
Product information
This splash water test device is according to the standard requirement of IEC60335-2-64 clause 15.1.1 and 15.1.2 to manufacture,In addition, IPX1, IPX2, IPX3 and IPX4 appliances are subjected for 5 min to the following splash test.
The apparatus shown in Figure 101 is used. During the test, the water pressure is so regulated that the water splashes up 150 mm above the bottom of the bowl. The bowl is placed on the floor for appliances normally used on the floor. For all other appliances, on a horizontal support 50 mm below the lowest edge of appliance, the bowl is so moved around as to splash the appliance from all directions. Care is taken that the appliance is not hit by the direct jet.
Modification:
Appliances normally used on a table are placed on a support having dimensions that are 15 cm±5 cm in excess of those of the orthogonal projection of the appliance on the support.
The device adopts aluminum structure, splash structure can be upward/downward adjusted; adopt the Foma wheels, it can move and also can be fixed; nozzle, bowls, and connecting tube are made of stainless steel, whole structure waterproof and anti-corrosion; equipped with a pressure gauge, real-time display the current hydraulic pressure.
Technical parameters:
1. Bowl:(φ35-φ25)*10mm,are made of stainless steel.
2. The nozzle diameter is 2mm, with an angle of 60 degrees on the bowl, 50mm distance from the bottom of the bowl, are made of stainless steel.
3. Splash structure lifting stroke: 1m .
4. Pressure gauge: 0.4Mpa.
5. Test method: Fix the splash device, rotate the test sample, test time is 5min, manual control.
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!