Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 15 set/ month |
| Delivery Time | 20 Days |
| Packaging Details | Plywood |
| Test standard | IEC60884-1 clause 13.14 |
| socket-outlets ratings | more than 16A and 250V |
| Plug | 4 pcs (conform to Mexican standard) |
| Hang weights | 5N*1pc |
| Brand Name | HongCe |
| Model Number | LS-1 |
| Certification | TUV、ITS、CSA、BV、SGS 、CNAS(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 60745-2-1 Electric Hammer Durability Test Apparatus Steel Ball Diameter 38mm
IEC 60811 Natural Convection Oven Heating Chamber 8-20 Air Changes Per Hour
IEC Testing equipment Inductive Load Bank With 3 Test Stations Output Current
IEC 60745-2-5 Testing Equipment For Circular Saw Switch And Lower Guard
Product Specification
| Payment Terms | T/T | Supply Ability | 15 set/ month |
| Delivery Time | 20 Days | Packaging Details | Plywood |
| Test standard | IEC60884-1 clause 13.14 | socket-outlets ratings | more than 16A and 250V |
| Plug | 4 pcs (conform to Mexican standard) | Hang weights | 5N*1pc |
| Brand Name | HongCe | Model Number | LS-1 |
| Certification | TUV、ITS、CSA、BV、SGS 、CNAS(cost additional) | Place of Origin | China |
| High Light | iec testing equipment ，iec tester | ||
4 Pcs Plug Test Apparatus IEC Test Equipment For Lateral Stress
Product details:
The appliance conforms to the standard of IEC60884-1 clause 13.14 figure 13. It is suitable for checking socket which rated current is not bigger than 16A and the voltage is not bigger than 250V. Its principle is to see whether there will be any damage to the socket in the standard sense when the electrical appliances insert to the socket and give it transverse stress.
Technical parameters:
Refer to the standard of IEC60884-1 clause 13.14, is suitable for socket-outlets having ratings no more than 16A and 250V, compliance is checked by means of the device shown in figure 13.
Common configuration:
Plug: 4 pcs (conform to Mexican standard: NMX-J-163-ANCE-2004 “WIRING DEVICES-CONFIGURATIONS” FOR CONFIGURATIONS: C1.1, C1.2, C1.5 and C1.9).
Hang weights: 5N*1pc.
Test method:
1. Before first use, user should be familiar with the relevant standards for more effective and proper using the test apparatus and completing the test.
2. Each specimen is mounted on a vertical surface with the plane through the socket-contacts horizontal. The device is then fully engaged and a weight hung on it such that the force exerted is 5 N.
3. The device is removed after 1 min and the mounting fixture is rotated 90°, then carry on the test . The test should be processed four times (up, right, down, left, processing one test in each direction). The mounting fixture should be rotated 90°after each engagement.
4. The device shall not become disengaged from the socket-outlet during the test.
5. After the tests, the socket-outlets shall show no damage in the sense of this standard.
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!