China factories

China factory - Guangzhou HongCe Equipment Co., Ltd.

Guangzhou HongCe Equipment Co., Ltd.

  • China,Guangzhou ,Guangdong
  • Verified Supplier

Leave a Message

we will call you back quickly!

Submit Requirement
China 3 Working Station Cable Testing Equipment , Electric Wire Abrasion Test
China 3 Working Station Cable Testing Equipment , Electric Wire Abrasion Test

  1. China 3 Working Station Cable Testing Equipment , Electric Wire Abrasion Test
  2. China 3 Working Station Cable Testing Equipment , Electric Wire Abrasion Test
  3. China 3 Working Station Cable Testing Equipment , Electric Wire Abrasion Test
  4. China 3 Working Station Cable Testing Equipment , Electric Wire Abrasion Test

3 Working Station Cable Testing Equipment , Electric Wire Abrasion Test

  1. MOQ: 1 set
  2. Price: Negotiation
  3. Get Latest Price
Payment Terms L/C, T/T
Supply Ability 10 sets per month
Delivery Time 30 days
Packaging Details Plywood
Fixed shaft diameter Φ40±0.3mm
Test rate Single strokes 40±1 times/minute
Test stroke 0.1mm up-and-down movement
Working station 3
Weight 500±5g*3
Counter 0~999999 (can be preset)
Brand Name HongCe
Model Number HDX1304
Certification Calibration certificate(cost additional)
Place of Origin China

View Detail Information

Contact Now Ask for best deal
Get Latest Price Request a quote
  1. Product Details
  2. Company Details

Product Specification

Payment Terms L/C, T/T Supply Ability 10 sets per month
Delivery Time 30 days Packaging Details Plywood
Fixed shaft diameter Φ40±0.3mm Test rate Single strokes 40±1 times/minute
Test stroke 0.1mm up-and-down movement Working station 3
Weight 500±5g*3 Counter 0~999999 (can be preset)
Brand Name HongCe Model Number HDX1304
Certification Calibration certificate(cost additional) Place of Origin China
High Light material testing equipmentelectric wire tester

 

Products Introduction:

This apparatus conforms to IEC60245-1 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 1:General requirements,IEC60245-2 clause 3.3 and Figure 3 Rubber insulated cables-Rated voltages up to and including 450/750 V-Part 2: Test methods.

It is used for checking the wear resistance test of the completed flexible cables.

 

Technical Parameters:

 

Power supply AC230V 50Hz
Fixed shaft diameter Φ40±0.3mm
Test rate Single strokes 40±1 times/minute
Test stroke 0.1mm up-and-down movement
Working station 3
Weight 500±5g*3
Counter 0~999999 (can be preset)
Dimension 1200×400×1400 (mm)
 
Test method:

1. This test shall be made on three pairs of samples of flexible cable, each sample having a length of about 1m.

 

2. In each pair one sample shall be wound so as to give nearly two turns on a fixed reel having a diameter of 40mm at the bottom of the groove as shown in figure 3, the distance between the flanges of the reel being such that the turns are in close contact with each other. The sample shall then be fixed to prevent any movement relative to the reel.

 

3. The other sample shall be placed in the groove formed by the turns and a weight having a mass of 500g shall be attached to one end.

 

4. The other end shall be moved up and down over a distance of 0.1m, at a rate of about 40 single strokes per minute.

 

Panel function:

[Counter]: Set the total test times required according to the test requirements. When the test times reaches the set value, the equipment automatically stop test.

 

[Speed regulation]: Adjust the motor speed, that is, adjust the movement speed of the movable clamp.

 

[Stop]: Press this button to stop the test.

 

[Start]: Press this button to start the test.

 

[Power]: Turn on and off the working power of this machine.

 

 
 
Note:
 

1. After the end of use, reset the movable clamp and turn off the power. Always refuel the screw section and keep it lubricated. Do not place metal and hard objects on the equipment casing.

2. The equipment should be inspected regularly and the loose screws and nuts should be tightened to ensure the good operation of the equipment.

3. Work environment must be clean, please keep away from corrosive items.

 
 

Company Details

Bronze Gleitlager

,

Bronze Sleeve Bushings

 and 

Graphite Plugged Bushings

 from Quality China Factory
  • Business Type:

    Manufacturer

  • Year Established:

    2003

  • Employee Number:

    50~100

  • Ecer Certification:

    Verified Supplier

Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...

+ Read More

Get in touch with us

  • Reach Us
  • Guangzhou HongCe Equipment Co., Ltd.
  • No.6-39, Yaogu Farm, Shibi No.3 Village, Shibi Street, Panyu District, Guangzhou
  • https://www.iectestingequipment.com/

Leave a Message, we will call you back quickly!

Email

Check your email

Phone Number

Check your phone number

Requirement Details

Your message must be between 20-3,000 characters!

Submit Requirement