Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | L/C, T/T |
| Supply Ability | 10 sets per month |
| Delivery Time | 20 days |
| Packaging Details | Plywood |
| Working volume | 150L |
| Temperature range | -40℃~+150℃ |
| Humidity range | 20 %RH～ 98 %RH |
| Brand Name | HongCe |
| Model Number | PTH-1000 (150L) |
| Certification | Third part calibration certificate(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC60335-2-14 Flexing Test Apparatus 2000 Flexing Times 6/Min Flexing Rate
Cord Anchorage Electrical Appliance Tester Strain And Twisting Device For
IEC 60335-1 Household Appliance Supply Cord Flexing Test Apparatus / Portable
Diameter 15mm Electrical Appliance Tester Temperature Rise Test Measurement
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 10 sets per month |
| Delivery Time | 20 days | Packaging Details | Plywood |
| Working volume | 150L | Temperature range | -40℃~+150℃ |
| Humidity range | 20 %RH～ 98 %RH | Brand Name | HongCe |
| Model Number | PTH-1000 (150L) | Certification | Third part calibration certificate(cost additional) |
| Place of Origin | China | ||
| High Light | electrical appliance tester ，portable appliance testing equipment | ||
IEC 60068 Electrical Appliance Tester Programmable Temperature Humidity Chamber Working Volume 150L
Product information
This test device can simulate different environment condition.So it is appropriate to test material performance,such as resist heat,resist cold,resist humidity,resist dry. It is designed and manufactured in accordance with the standard requirement of IEC 60068-2-1.1990, IEC60068-2-2.1974 and ect.
Technical parameters
1. Working volume: 150L
2. Temperature range: -40 ℃～ +150 ℃
3. Humidity range: 20 %RH～ 98 %RH
*Note: Please refer to below humidity use range chart!
4. Temperature and humidity control accuracy: ±0.2℃; ±2.5%RH.
* To guarantee above 2~4 performance, should be measured 30 minutes after the temperature sensing measurements is stable!
5. Temperature and humidity distribution uniformity: ±2℃; ±3%RH.
*Note: To guarantee below 6~11 performance, the measuring positions should be each wall’s 1/6 positions of the test zone, and should be measured 30 minutes after the temperature is stable!
6. Heating time: Heating from the room temperature to 150℃, the total heating time is 50 mins (under non-load state).
7. Cooling time: Cooling from the room temperature to -40℃, the total cooling time is 40mins (under non-load state).
8. Inner chamber dimensions: test area: 50×60×50cm(W×H×D).
*Note: The volume of placing samples should not exceed 2/3 of the capacity of the test zone.
9. Equipment installation space: at least 920×1600×870cm(W×H×D).
10. Test chamber door: 80 × 105 cm(W×H), total 1.
11. Power source: AC 1 ∮ 220 V 50 Hz MAX 40 A
Structure
A. Chamber structure:
SUS#304, plate thickness 1 mm.
Insulation Material: PU Foaming, thickness 100 mm.
B. Cooling refrigeration cycle system:
1. Refrigeration systems:
a. R404 Refrigeration cycle system
b. R23 Refrigeration cycle system
2. Condenser: Air-cooled
3. Expansion mode: Capillary
4. Evaporator: Air loop mode
C. Heating system:
Heater: 220 V 2 KW
D. Humidification system:
1. Humidifier: stainless steel heater 220 V 2. KW× 1 SET.
2. Humidity gauze sink and humidifier water supply system: automatic replenishment mode.
E. Automatic Control System:
1. PLC control TEMI880.
* Please refer to the controller instruction manual in the CD.
2. Temperature and humidity sensors: RTD (Dry bulb / wet bulb).
* Controlled by circuit.
F. Air circulation and drainage systems:
1. Loop air duct: 1 group
a. material: SUS#304 stainless steel.
b. Air blower: 1 ∮ 220 V 60W × 1 SET
2. Diameter of drain pipe .
G. Protection system:
Over temperature protection switch
Water shortage protection
Electromagnetic switch and overload current protector
No fuse switch
Compressor overload protector
Control circuit protection fuse
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!