Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 10 Sets per month |
| Delivery Time | 25 days |
| Packaging Details | Plywood case |
| Usage | Impact resistance test |
| Warranty | 1 Year |
| Product name | Impact Tester for Handlamps |
| Standard | IEC60598-2-8 |
| Material | Stainless steel and aluminum |
| Impact height | 400mm/1000mm |
| External dimensions | 1250mm×1500mm×200mm |
| Brand Name | HongCe |
| Model Number | HL-1 |
| Certification | Calibration Certificate(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
Digital Control Lamps Light Testing Equipment Adjustment Devices Of Torsion And
PLC Control LED Light Tester , 250v Self Ballasted Lamp Switches Endurance And
IEC60669-1 LED Testing Equipment / Self Ballasted Lamp Switches Fully Automatic
IEC62560 Clause 15 Circuit Figure 8 Light Testing Equipment For Non - Dimmable
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets per month |
| Delivery Time | 25 days | Packaging Details | Plywood case |
| Usage | Impact resistance test | Warranty | 1 Year |
| Product name | Impact Tester for Handlamps | Standard | IEC60598-2-8 |
| Material | Stainless steel and aluminum | Impact height | 400mm/1000mm |
| External dimensions | 1250mm×1500mm×200mm | Brand Name | HongCe |
| Model Number | HL-1 | Certification | Calibration Certificate(cost additional) |
| Place of Origin | China | ||
| High Light | IEC 60598-2-8 Impact Tester ，1000Mm Height Impact Tester ，Handlamps Impact Tester | ||
IEC60598-2-8 Impact Tester for Handlamps With 400mm And 1000 mm Impact Height
Product introduction: Light Testing Equipment
This apparatus confirms to the standard requirement of IEC60598-2-8:2007 clause 8.6.6.2 and Figure 1. It is used to check the mechanical strength of handlamps. This device should be mounted on a solid wall vertically of brick, stone, concrete or similar material. This is a manual apparatus.
Application:It is used to test the impact resistance of hand lamps. Light Testing Equipment
Parameters:
1. Bar size: 40mm×40mm×5mm right-angle section with the corner rounded to a radius of 5mm.
2. Impact height: 400mm/1000mm
3. External dimensions: 1250mm×1500mm×200mm
4. Material:Stainless steel and aluminum Light Testing Equipment
| Model | HL-1 |
| Product name | Impact Tester for Handlamps |
| Bar size Light Testing Equipment | 40mm×40mm×5mm right-angle section with the corner rounded to a radius of 5mm. |
| Impact height | 400mm/1000mm |
| External dimensions | 1250mm×1500mm×200mm |
| Material | Stainless steel and aluminum |
Test procedure:
The handlamp, without lamp, is suspended by its flexible cable or cord so that the point "a", indicated in Figure 1 , rests against the corner of the bar, the point of suspension being 400 mm above the bar. It is then drawn away from the bar in a plane perpendicular to the wall until the cable or cord is horizontal.
The sample is allowed to fall against the bar three times in this way. It is then suspended so that the impact is at the point "b", and caused to fall similarly three times, followed by three falls against the point "c".
After this first test, the sample shall show no damage impairing its safety or further use. The whole of the above test is then repeated but with the point of suspension 1 m above the bar. Light Testing Equipment
After this second test, the sample shall show no damage impairing its safety or further use.
The means protecting the lamp against damage shall not have loosened, even if it has become deformed. Breakage of the protective glass of translucent cover, if any, is neglected, if it is not the sole means protecting the lamp against damage.
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!