Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 5 set per month |
| Delivery Time | 30 days |
| Packaging Details | Plywood |
| Control | Mitsubishi PLC |
| Station | One, can be customized |
| Built-in Load | 0~250V/5KW |
| Test Speed | ≥10 freq/min |
| Standard | IEC/EN 60745-2-5 |
| Test sample | Circular saws |
| Warranty | 1 Year |
| Application | Circular saws performance Test |
| Brand Name | HongCe |
| Model Number | HDD8304 |
| Certification | Third party calibration certificate(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
IEC 60745-2-1 Electric Hammer Durability Test Apparatus Steel Ball Diameter 38mm
IEC 60811 Natural Convection Oven Heating Chamber 8-20 Air Changes Per Hour
IEC Testing equipment Inductive Load Bank With 3 Test Stations Output Current
Touch Current Measuring Circuit Figure 5 Network Of IEC 60990 For Leakage
Product Specification
| Payment Terms | T/T | Supply Ability | 5 set per month |
| Delivery Time | 30 days | Packaging Details | Plywood |
| Control | Mitsubishi PLC | Station | One, can be customized |
| Built-in Load | 0~250V/5KW | Test Speed | ≥10 freq/min |
| Standard | IEC/EN 60745-2-5 | Test sample | Circular saws |
| Warranty | 1 Year | Application | Circular saws performance Test |
| Brand Name | HongCe | Model Number | HDD8304 |
| Certification | Third party calibration certificate(cost additional) | Place of Origin | China |
| High Light | IEC60745-2-5 Integrated Test Device ，Circular Saw Switch Integrated Test Device | ||
IEC 60745-2-5 Testing Equipment For Circular Saw Switch And Lower Guard
Standard of IEC Testing Equipment:
IEC 60745-2-5 Hand-held motor-operated electric tools – Safety – Part 2-5: Particular requirements for circular saws Annex BB.20.102, Annex M21.18, Annex M21.18.301, Annex M21.203, Annex M21.301, figure M.301
Application of IEC Testing Equipment:
It is used to test the circular saw switch performance and circular saw lower guard’s durability and recovery time.
Feature of IEC Testing Equipment:
The saw table shall be provided with a device for locking the switch of the hand-held circular saw in the “on” position. This device shall disengage when the saw is removed from the saw table.
The table shall be provided with a means to keep the lower guard of the circular saw open while mounted to the table. The means proved to keep the lower guard open shall be accomplished by adequate mechanical means.
Parameters of Circular Saw Switch And Lower Guard tester:
| Serial No.: | Parameter |
| Input Power | 230V/50Hz |
| Control System | PLC + touch screen |
| Station | Single |
| Built-in Load | 0~250V/5KW voltage regulator, equipped with B socket |
| Test Cycles | 0-999999, can be preset |
| Test Speed | ≥10 freq/min |
| Guard Recovery Detection Time | 0.01-9.99s, can be displayed(Recovery time) |
| Circular Saw Switch Locking Device | Lock or release the switch by motor driving |
| Operation Buttons | Stop and Start buttons on the panel for operator easily cut off or turn on the power |
Picture for reference:
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!