Guangzhou HongCe Equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 10 Sets per month |
| Delivery Time | 5 days |
| Packaging Details | Aluminum Box |
| Model | HT-I22 |
| Probe length | 80mm |
| Exert pressure | 10N、20N、30N |
| Constitute | Fingertip, middle finger, finger base |
| Diameter | φ12 |
| Reference to international standards | IEC 60335-1 |
| Brand Name | HongCe |
| Model Number | HT-I22 |
| Certification | Calibration certificate(cost additional) |
| Place of Origin | China |
View Detail Information
Explore similar products
4mm Hazardous Live Parts Probe Test Finger Probe IEC 1010 / IEC60065 / EN61010-1
IEC 1010 / IEC60335-2-25 Test Finger Probe Anti - Electric Shock Testing Machine
String Light Flat Test Finger Probe IEC60598-2-20 Clause 20.11.2.
Scratch Resistant Pin Electric Safety Testing Probes IEC60335-1 clause 21
Product Specification
| Payment Terms | T/T | Supply Ability | 10 Sets per month |
| Delivery Time | 5 days | Packaging Details | Aluminum Box |
| Model | HT-I22 | Probe length | 80mm |
| Exert pressure | 10N、20N、30N | Constitute | Fingertip, middle finger, finger base |
| Diameter | φ12 | Reference to international standards | IEC 60335-1 |
| Brand Name | HongCe | Model Number | HT-I22 |
| Certification | Calibration certificate(cost additional) | Place of Origin | China |
| High Light | IEC 60335-1 Test Finger Probe ，Test Finger Probe Pressure 30N | ||
IEC 60335-1 Test Finger Probe For Test Nails The maximum applied pressure is 30N
Product description of Test Finger Probe:
1. The test nails are made according to GB4706.1-2005, IEC60335-1 and UL standards.
2. The test nail is mainly used to test whether non-detachable parts that are exposed to electric shock or contact moving parts can withstand the mechanical stress that occurs during normal use and reach the specified protection level.
Sample range of Test Finger Probe:
Non-detachable parts of electrical appliances that are protected against contact with live parts, waterproof or protected against contact with moving parts.
Application of Test Finger Probe:
For the surface pressure of the scratch test of 10N, the material on the scratched surface cannot be separated. Insert a test finger into any gap or joint, and apply a 10N side pulling force vertically, but do not twist or pry, and the relevant parts must not fall off or be damaged. Insert a test finger into any gap or joint, and apply a 10N side pulling force in the direction of component disassembly, but do not twist or pry, and the relevant components must not fall off or be damaged.
Technical parameters of Test Finger Probe:
| Model | HT-I22 |
| Probe length | 80mm |
| Nail length | 37° |
| Trial finger diameter | Φ12 |
| Apply pressure value | 10N,20N,30N |
| Reference standard | GB4706.1-2005 Figure 7, IEC60335-1 Figure 7 |
Detail image of Test Finger Probe:
Company Details
Business Type:
Manufacturer
Year Established:
2003
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate... Guangzhou HongCe Equipment Co., Ltd (hereinafter referred to as HongCe) is located in Guangzhou, China, since 2003, engaged in developing and providing test equipment and detection system for electronic & electrical products, house appliances and other products. HongCe is professionally dedicate...
Get in touch with us
Leave a Message, we will call you back quickly!