Dongguan Kingpo Technology Limited
| Payment Terms | T/T |
| Supply Ability | 10 sets per month |
| Delivery Time | 10 working days |
| Packaging Details | safety wooden box |
| application | IPX5X6 test |
| distance from jet nozzle to enclosure | 2.5~3m |
| Pressure gauge | 0~0.25MPa |
| Minimum test duration | 3 min |
| Brand Name | KINGPO |
| Certification | calibration certificate |
| Place of Origin | China |
View Detail Information
Explore similar products
Photodegradation UV Weathering Tester Chamber For Exposed Material
600mm Oscillating Tube Test Chamber IPX3 IPX4 Ingress Protection
IEC60529 Ingress Protection Test Equipment IPX1 to IPX6 Control System
IPX5 IPX6 Integration Water Jet Test Set 550L With Supply System
Product Specification
| Payment Terms | T/T | Supply Ability | 10 sets per month |
| Delivery Time | 10 working days | Packaging Details | safety wooden box |
| application | IPX5X6 test | distance from jet nozzle to enclosure | 2.5~3m |
| Pressure gauge | 0~0.25MPa | Minimum test duration | 3 min |
| Brand Name | KINGPO | Certification | calibration certificate |
| Place of Origin | China | ||
| High Light | IEC 60529 Hand Held Sprayer Nozzle ，IPX5 Hand Held Sprayer Nozzle ，IEC 60529 IPX6 Waterproof Test | ||
IEC 60529 Hand Held Sprayer Nozzle IPX5 IPX6 Waterproof Degree Test
IEC60529 IPX5 IPX6 Handheld Spray Nozzle For Waterproof Test Of The Electric Appliance
Product information:
The jet nozzle is designed and manufactured in accordance with IEC60529 clause IPX5 and IPX6. It is used for the waterproof test of the electric appliance.
Test for second charateristic numeral 5 with the 6.3 mm nozzle
The test is made by spraying the enclosure from all practicable directions with a stream of water from a standard test nozzle as shown in figure 6.
The conditions to be observed are as follows:
Internal diameter of the nozzle:6.3 mm;
Delivery rate:12.5 L/min±5%;
Water pressure: to be adjusted achieve the specified delivery rate;
Core of the substantial stream: circle of approximately 40 mm diameter at 2.5 m distance from nozzle;
Test duration per square metre of enclosure surface area likely to be sprayed:1 min;
Minimum test duration: 3 min;
Distance from nozzle to enclosure surface: between 2.5 m and 3 m. Ingress Protection Test Equipment
Test for second characteristic numeral 6 with the 12.5 mm nozzle
The test is made by spraying the enclosure from all practicable directions with a stream of water from a standard test nozzle as shown in figure 6.
The conditions to be observed are as follows:
Internal diameter of the nozzle:12.5 mm;
Delivery rate: 100 I/min ±5%;
Water pressure: to be adjusted to achieve the specified delivery rate；
Core of the substantial stream: circle of approximately 120 mm diameter at 2.5 m distance from nozzle;
Test duration per square metre of enclosure surface area likely to be sprayed: 1 min;
Minimum test duration: 3 min;
Distance from nozzle to enclosure surface: between 2.5 m and 3 m. Ingress Protection Test Equipment
Technical parameters:
| No. | Item | IPX5 | IPX6 |
| 1 | Water supply | Water flow rate ＞ 12.5L/min±5% clean water without inclusion. It can be achieved by the stainless steel water tank and pressurized equipment | Water flow rate ＞100L/min±5% clean water without inclusion. It can be achieved by the stainless steel water tank and pressurized equipment |
| 2 | The nozzle diameter | Ф6.3mm | Ф12.5mm |
| 3 | Water flow | 12.5±0.625L/min,Flow meter is adjustable | 100±5 L/min,Flow meter is adjustable |
| 4 | The distance from jet nozzle to enclosure | 2.5~3m | 2.5~3m |
| 5 | Testing time | Not less than 1min/m²(not less than 3 mins) | Not less than 1min/m²(not less than 3mins) |
| 6 | Pressure gauge | 0~0.25MPa | 0~0.25MPa |
| 7 | Site requirements | Dedicated IP waterproof test room whose width is more than 3m, With good function of inflow and drainage. Wall installation | Dedicated IP waterproof test room whose width is more than 3m, With good function of inflow and drainage. Wall installation |
Company Details
Business Type:
Manufacturer
Year Established:
2012
Employee Number:
150~200
Ecer Certification：
Verified Supplier
Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one-stop service for worldwide labs from R&D,testing,production to after-sales service.We dedicate ourselves in achieving optimal production quality for our customers,... Kingpo Technology Development Limited is a pioneer and leader of global safety testing equipment manufacturer.We offer one-stop service for worldwide labs from R&D,testing,production to after-sales service.We dedicate ourselves in achieving optimal production quality for our customers,...
Get in touch with us
Leave a Message, we will call you back quickly!