MCP73113 Lipo Battery Charger Chip QFN Voltage Regulator Integrated Circuits

Product Specification

MCP73113 MCP73113-16SI/MF MCP73113-16AI/MF Integrated input voltage single cell Li-lon/Li-Polymer battery device PMIC

MCP73113T-06SI/MF MCP73113T-16AI/MF MCP73113EV-1SOVP  MCP73114-0NS/MF

Integrated input voltage single cell Li-lon/Li-Polymer battery device PMIC

Single-Cell Li-Ion/Li-Polymer Battery Charge Management Controller with Input Overvoltage Protection

The MCP73113 is a single cell, highly integrated Li-Ion battery charge management controller for use in space-limited and cost-sensitive applications.

The MCP73113 can accept an absolute maximum of 18V input and provides a 6.5V overvoltage protection.

The output current can is programmable to be between 130 mA and 1100 mA.

The MCP73113 is fully specified over the ambient temperature range of -40°C to +85°C and is available in a 10 lead, 3x3 mm DFN package.

Applications:
• Low-Cost Li-Ion/Li-Poly. Battery Chargers
• MP3 Players
• Digital Still Camera
• Portable Media Players
• Handheld Devices
• Bluetooth® Headsets
• USB Chargers

Description:

The MCP73113/4 are highly integrated Li-Ion battery charge management controllers for use in space-limited and cost-sensitive applications.

The MCP73113/4 devices provide specific charge algorithms for Li-Ion/Li-Polymer batteries to achieve optimal capacity and safety in the shortest charging time possible. Along with their small physical size, the low number of external components make the MCP73113/4 ideally suitable for portable applications.

The absolute maximum voltage, up to 18V, allows the use of MCP73113/4 in harsh environments, such as low cost wall wart or voltage spikes from plug/unplug.

The MCP73113/4 devices employ a constant current/ constant voltage charge algorithm.

The various charging voltage regulations provide design engineers flexibility to use in different applications.

The fast charge, constant current value is set with one external resistor from 130 mA to 1100 mA.

The MCP73113/4 devices limit the charge current based on die temperature during high power or high ambient conditions.

This thermal regulation optimizes the charge cycle time while maintaining device reliability.

The PROG pin of the MCP73113/4 also serves as enable pin. When high-impedance is applied, the MCP73113/4 will be in Standby mode.

The MCP73113/4 devices are fully specified over the ambient temperature range of -40°C to +85°C.

They are available in a 10-lead, DFN package.

Features:
• Complete Linear Charge Management Controller:
- Integrated Input Overvoltage Protection
- Integrated Pass Transistor
- Integrated Current Sense
- Integrated Reverse Discharge Protection
• Constant Current/Constant Voltage Operation
with Thermal Regulation
• 4.15V Undervoltage Lockout (UVLO)
• 18V Absolute Maximum Input with OVP:
- 6.5V (MCP73113)
- 5.8V (MCP73114)
• High Accuracy Preset Voltage Regulation Through
Full Temperature Range (-5°C to +55°C): +0.5%
• Battery Charge Voltage Options:
- 4.10V, 4.20V, 4.35V or 4.4V
• Resistor Programmable Fast Charge Current:
- 130 mA-1100 mA
• Preconditioning of Deeply Depleted Cells:
- Available Options: 10% or Disable
• Integrated Precondition Timer:
- 32 Minutes or Disable
• Automatic End-of-Charge Control:
- Selectable Minimum Current Ratio:
5%, 7.5%, 10% or 20%
- Elapse Safety Timer: 4 HR, 6 HR, 8 HR or
Disable
• Automatic Recharge:
- Available Options: 95% or Disable
• Charge Status Output-Two Style Options
• Soft Start
• Temperature Range: -40°C to +85°C
• Packaging: DFN-10 (3 mm x 3 mm)

Charger IC Lithium Ion/Polymer 10-DFN (3x3) IC

Battery Management Product Family  Specification:

Environmental & Export Classifications

Microchip is a leading provider of microcontroller, mixed-signal, analog,security and Flash-IP solutions,

as well as a wide variety of other products.
Microchip enable low-risk product development, lower total system cost and faster time to market

for thousands of diverse customer applications worldwide.

Similar products :

14/20-Pin Flash Microcontrollers with XLP Technology microcontroller IC Marking information:

About US

Shenzhen Angel Technology Electronics Co Was Founded In HongKong Since 2006, Our branch Located In The Silicon Valley Of China, Shenzhen.

Shenzhen Angel Technology Electronics Co have have obtained the ISO9001 quality management system certification.

The Mission Of Shenzhen Angel Technology Electronics Co has always been to provide Quality Electronics Components To Manufacturers Worldwide.Angel-tech's vision is become the excellent electronic components supplier with the highest satisfaction between employees and customers. Early On We became the Primary channel for project closures And Inventory build-ups for Major Distributors such as Arrow Electronics and Contract Manufacturers. Angel Technology Electronics Co Has since then added Sourcing Of High Quality Components From Local Manufacturers In China.