Angel Technology Electronics Co
| Payment Terms | T/T, Western Union |
| Supply Ability | 50000PCS |
| Delivery Time | 1-10DAYS |
| Packaging Details | Standard package |
| Category | Crystals, Oscillators, Resonators Crystals |
| Series | QUARTZ CRYSTAL UNITS |
| Nominal frequency | 32.768KHz |
| Frequency Stability | ±10ppm |
| Load Capacitance | 12.5PF |
| Mounting Type | Through hole |
| Package / Case | dip2 |
| Height | 2.0mmx6.0mm |
| Production name | 32.768KHZ 12.5PF 10PPM QUARTZ CRYSTAL UNITS X206032768KGB2SC |
| Stock | In Stock |
| Brand Name | YXC |
| Model Number | X206032768KGB2SC |
| Certification | RoHS |
| Place of Origin | China |
View Detail Information
Explore similar products
EG-2121CA100.0000M-LGPAL3 Seiko Epson SAW Oscillators 100MHz 2.5Volts 50ppm
32.768kHz XO CMOS Crystal Oscillator KC2520B32K7680CM2ESH
CSPBGA SiT8021 SITIME MEMS Oscillator For High Speed Protocols
8PF 25MHz Quartz Crystal Oscillator TSX-3225 SMD Resonator
Product Specification
| Payment Terms | T/T, Western Union | Supply Ability | 50000PCS |
| Delivery Time | 1-10DAYS | Packaging Details | Standard package |
| Category | Crystals, Oscillators, Resonators Crystals | Series | QUARTZ CRYSTAL UNITS |
| Nominal frequency | 32.768KHz | Frequency Stability | ±10ppm |
| Load Capacitance | 12.5PF | Mounting Type | Through hole |
| Package / Case | dip2 | Height | 2.0mmx6.0mm |
| Production name | 32.768KHZ 12.5PF 10PPM QUARTZ CRYSTAL UNITS X206032768KGB2SC | Stock | In Stock |
| Brand Name | YXC | Model Number | X206032768KGB2SC |
| Certification | RoHS | Place of Origin | China |
| High Light | Cylindrical Quartz Crystal Units ，X206032768KGB2SC ，12.5PF Quartz Crystal Units | ||
Electronic components 32.768KHZ 12.5PF 10PPM QUARTZ CRYSTAL UNITS X206032768KGB2SC Directly inserted cylindrical crystal oscillator
Part number:
| Package type | Part number | Model Number |
| 2P 2060 | X206032768KGB2SC | YT-26 |
| 2P 3080 | X308032768KGB2SC | YT-38 |
Description:
| Frequency (HZ) | 32.768KHZ |
| Frequency offset (PPM) | ±10PPM |
| Voltage (V)/ Load (PF) | 12.5PF |
| Working Temperature | ,-20℃~+70℃ |
| Dismensions (mm) | 2.0mmx6.0mm |
Reliability Test Items
1. Mechanical Performance Tests
| Shock |
Orient the sample in any attitude and drop it three times from a height of 75 cm onto a hardwood board with a thickness of 3 cm
|
| Vibration | Subject the sample to 1.5-minute cycles of frequencies of 10 to 55 Hz and amplitudes of 1.5mm for two hours in each of the X,Y, and Z directions, or 6 hours in total. |
| Tensile strength of terminal | Apply a 1.5Kg tensile load to each terminal and sustain it for 30±5 seconds. |
| Bending strength of terminal |
Apply a 0.5 Kg load to one of the terminals, and after tilting the main unit for 90°,restore to its original attitude. Then, tilt it in an opposite direction for 90°,and restore to its original attitude |
| Solder ability | Dip terminals in RMA flux for5 ± 0.5 seconds. Under room temperature. Dip terminals in a 230±5℃ solder bath for 5±0.5 seconds. The solder shall leave an undipped terminal length of 2 mm at their base . |
| Resistance to Soldering Heat |
Dip terminals in a 260±5℃ solder bath for 10±0.5 seconds. The solder shall leave an undipped terminal length of 2 mm at their base |
| Leaking Test | Take measurements with a helium leakage detector,or measure insulation resistance under pressure. |
Specifications:
| Specification Number | Specifications |
| A | Any variation between the pre- and post-test frequencies shall remain within ±5ppm. The post-test equivalent series resistance shall remain within its specified tolerance range. |
| B | Any variation between the pre- and post-test frequencies shall remain within ±10ppm. The post-test equivalent series resistance shall remain within its specified tolerance range |
| C | After each test, no visible damage shall be manifested, nor shall the hermetic seal break down. |
| D | At least 90% of each dipped area shall be covered by fresh solder |
| E | 1×10-2 μPa．m3 /s Max or IR≥500MΩ |
Remark:Measurements shall be taken at 25±2℃,and after each test, the sample be exposed
to two hours at 25±2℃
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent
Year Established:
2006
Total Annual:
80 millions-500 millions
Employee Number:
20~200
Ecer Certification：
Verified Supplier
Angel Technology Electronics Co Was Founded In HongKong Since 2006, Our branch Located In The Silicon Valley Of China, Shenzhen.Angel Technology provide one stop service for electronic components,PCB and PCB Assembly(SMT). The Mission Of Angel Technology Electronics Co h... Angel Technology Electronics Co Was Founded In HongKong Since 2006, Our branch Located In The Silicon Valley Of China, Shenzhen.Angel Technology provide one stop service for electronic components,PCB and PCB Assembly(SMT). The Mission Of Angel Technology Electronics Co h...
Get in touch with us
Leave a Message, we will call you back quickly!