DELI ELECTRONICS TECHNOLOGY CO.,LTD
| Payment Terms | T/T, Western Union ， ESCROW |
| Supply Ability | 500000PCS |
| Delivery Time | STOCK |
| Packaging Details | BAG |
| Max. Current | 0.5A |
| Max. Voltage | 50V AC |
| Mechanical Life | 50000 cycles |
| Switch Function | 1P2T--- Single pole double |
| Can melt pin | 3 pin-General for copper |
| MEASURED AT SMALL CURRENT | 30mΩMAX. |
| Brand Name | ECHIP |
| Model Number | smd mini 3 position slide electrical switch |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
15V Low Profile TE 8-1437565-1 0.02A SMD Tactile Switch
1825027-5 TE 7.0*3.5mm Side Switch Tactile Spst-On 0.05A 24V Touch Button Switch
A1106LUA-T Allegro Hall Effect Unipolar Switch Heat Resistant Hall Motor 3.8-2
SS12D03G2 Toggle Push Button On Off Switch Small Sliding DC 50V 0.5A
Product Specification
| Payment Terms | T/T, Western Union ， ESCROW | Supply Ability | 500000PCS |
| Delivery Time | STOCK | Packaging Details | BAG |
| Max. Current | 0.5A | Max. Voltage | 50V AC |
| Mechanical Life | 50000 cycles | Switch Function | 1P2T--- Single pole double |
| Can melt pin | 3 pin-General for copper | MEASURED AT SMALL CURRENT | 30mΩMAX. |
| Brand Name | ECHIP | Model Number | smd mini 3 position slide electrical switch |
| Place of Origin | CHINA | ||
| High Light | momentary push button switch ，illuminated push button switch | ||
Manufacturers selling tripod ears without vertical (1P2T) black DL-12F17 toggle switch environmental protection material
smd mini 3 position slide electrical switch Push Button On Off Switch
The specification of slide switch
MOQ:100pcs
Multi function switch
Various knob types
Used in electronics machines
CE,RoHS Certification
1) UL,CUL,VDE,TUV,CE,EK,CQC Approvals
2) All of our products are ROHS certificate
3) Safe,reliable miniature switch
4) Nice appearance,tight configuration,characteristic:small contact gap,quick action,high sensitivity and small operating travel
5) Long life ,high reliability
6) A variety of contact terminals
7) A variety of levers
8) Adopt thermosetting plastic or thermoplastic
9) Widely used in home appliance,electronic equipment,automatic machine,communication equipment,car electron,apparatus and instrument etc.
Advantage
1) Safe , reliable basic switch
2) Nice appearance , tight configuration. Characteristic: Small cotact clearance, quick action, high sensitivity and small operating travel.
3) Long life, high reliability,
4) A variety of contact terminals
5) Widely used in home appliance, electronic equipment, automatic machine,communication equipment, car electron, apparatus and instrument, electric motion tool etc.
| CONTACT RESISTANCE | MEASURED AT SMALL CURRENT(100 mA OR LESS) | 30mΩMAX. |
| INSULATION RESISTANCE | APPLY A VOLTAGE OF 500V DC SHALLBEAPPLIED FOR 1 MIN AFTER WHICH MEASUREMENT BE MADE: (1) BETWEEN TERMINALS. (2) BETWEEN INDIVIDUAL TERMINALS AND FRAME. | 100MΩMIN. |
| DIELECTRIC STRENGTH | AC 500V rms(50-60Hz)FOR 1 MIN TRIP CURRENT: 0.5 mA (1) BETWEEN TERMINALS. (2) BETWEEN INDIVIDUAL TERMINALS AND FRAME. | WITHOUT DAMAGE TO PARTSARCING OR BREAKDOWN, ETC. |
| MECHANICALCHARACTERISTICS | | |
| ITEM | TEST CONDITIONS | PERFORMANCE |
| OPERATING FORCE | A STATIC LOAD OF 300gf SHALL BE APPLIED TO THE TERMINAL FOR 15 SEC.IN ANY DIRECTION | ELECTRICAL CHARACTERISTICS SHALLBE SATISFIED WITHOUTDAMAGE OR EXCESSIVE LOOSENESS OF TERMINALS. |
| TERMINAL STRENGTH | A STATIC LOAD OF 300gf SHALL BE APPLIED TO THE TERMINAL FOR 15 SEC.IN ANY DIRECTION | ELECTRICAL CHARACTERISTICS SHALLBE SATISFIED WITHOUTDAMAGE OR EXCESSIVE LOOSENESS OF TERMINALS. |
| DISPLACEMENT OF ACTUATOR (KNOB) | A STATIC LOAD OF 10 N(1Kgf)SHALL BE APPLIED TO THE TOP OF THE ACTUATOR(KNOD) AND THEN DISPLACEMENT SHALL BE MEASURED TO THE DIR- ECTION OF THE ARROW. | THE LEVER SHALL HAVE NO SERIOUS DEFORMATION AND FUNCTION IS NORMALLY . |
| LIFE TEST | ENDURANCE WITHOUT LOADING: A SWITCH SHALL BE SUBJECTED TO 10,000 CYCLES AT A SPEED OF 15 TO 18 CYCLES PER MINUTE WITHOUT LOADING. | (1) CONTACT RESISTANCE 100mΩMAX. (2) INSULATION RESISTANCE 50MΩMIN. (3) WITHSTAND VOLTAGE AC 500V,1 MINUTE. (4) OPERATING FORCE ±30% INITIAL VALUE. (5) WITHOUT DAMAGE TO PARTS ARCING OR BREAKDOWN ETC. |
| SOLDERA- BILITY TEST | THE TOP OF THE TERMINALS SHALL BE DIPPED 2mm IN THE SOLDER BATH OF 230±5 Centigrade FOR 3±0.5 SECONDS. | THE AREA OF SOLDERING. SHOULD BE OVER 75%. |
| RESISTANCE TO SOLDERING HEAT TEST | SOLDER BATH METHOD: SOLDER TEMPERATURE 260±5 Centigrade IMMERSION TIME 3±0.5 SEC IMMERSION DEPTH UP TO THESURFACE OF THE BOARD THICKNESS OF PRINTED WIRINGBOARD 1.6mm DIMENSIONS OFCOMPONENT HOLES IN THE PRINTED WIRING BOARD SHALL BEING ACCORDANCE WITH THOSE SPECIFIED IN THIS SPECIFICATION. | WITHOUT DEFORMATION OF CASE OR EXCESSIVE LOOSENESS OF TEMINALS ELECTRICAL CHARACTERISTICS SHALL BE SATISFIED. |
| COLD TEST | THE SWITCH SHALL BE STORED AT A TEMPERATURE OF -25±3 Centigrade FOR 48 HOURS. THEN THE SWITCH SHALL BE MAINTAINED AT STANDARD ATMOSPHERIC CONDITIONS FOR 1 HOURAFTER WHICH MEASUREMENT SHALL BE MADE. | THERE SHALL BE NO DEFORMATION OR CRACKS IN MOLDED PART. |
| HEAT TEST | THE SWITCH SHALL BE STORED AT A TEMPERATUREOF70±2 Centigrade FOR 48 HOURS. THEN THE SWITCHSHALL BE MAINTAINED AT STANDARD ATMOSPHERICCONDITIONS FOR 1 HOUR AFTER WHICH MEASUREMENT SHALL BE MADE. | THERE SHALL BE NO DEFORMATION OR CRACKS IN MOLDED PART. |
| HUMIDITY TEST | THE SWITCH SHALL BE STORED AT A TEMPERATUREOF40±2 Centigrade AND A HUMIDITY OF 90% TO 95% FOR 96 HOURS.THEN THE SWITCH SHALL BE MAINTAINED AT STANDARD ATMOSPHERIC CONDITION FOR 1 HOUR AFTER WHICH MEASUREMENT SHALL BE MADE. | THERE SHALL BE NO DEFORMATION OR CRACKS IN MOLDED PART. |
| STANDARD ATMOSPHEIC CONDITIONS | UNLESS OTHERWISE SPECIFIED. THE STANDARD RANGE OF ATMOSPHERIC CONDITIONS FOR MAKING MEASUREMENTS AND TESTS ARE AS FOLLOWS: (1)AMBIENT TEMPERATURE :5 TO 35 -Centigrade (2)RELATIVE HUMIDITY : 45% TO 85% (3)AIR PRESSURE : 86Kpa TO 106Kpa | |
| PRACTICAL TEMPERATURERANGE | -16~+60 Centigrade | |
material: iron;
process: by electroplating nickel
or clay pot black process,
thus preventing the oxidation
Customizable:Steel pin,
Antirust technology,Word mark
Material: phosphor copper;
Treatment: electroplating silver.
Customizable
Stitch length,
With hole,
Pin direction
Material: POM material,
such as fire retardant
high-temperature requirement,
Often choose PA nylon material
processing craft: injection molding.
Customizable
Temperature resistance
length
Knob Type (can check on Code Explanation )
Material: phosphor copper;
Treatment: electroplating silver.
Customizable
large current
And other materials
Material: wood;
Process: stamping forming.
Not customizable
Material: stainless steel;
Treatment: electroplating nickel.
Not customizable
Material: bronze;
Process: stamping forming.
Customizable
Oprating Force(20gf-800gf)
Material
Material: red oil or green oil
A kind of oil chemical industry,
On the terminal
Contact with the floor area,
The adornment effect.
General requirements non-toxic,
Environmental protection.
Not customizable
Can not use.
Deli electronics tehcnology co ltd
www.icmemorychip.com
Email:sales3@deli-ic.com
Skype:hkdeli881
TEL:86-0755-82539981
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Trading Company
Year Established:
2005
Total Annual:
100000 -500000
Employee Number:
5~10
Ecer Certification：
Active Member
DELI ELECTRONICS TECHNOLOGY CO.,LTD was founded in 2005. DELI has developed into a comprehensive supply chain of electronic components.The main business line of the company include Integrated circuit,Thyristor,diodes,transistors,capacitors,relaysconnectors,switches, led,sensor,in... DELI ELECTRONICS TECHNOLOGY CO.,LTD was founded in 2005. DELI has developed into a comprehensive supply chain of electronic components.The main business line of the company include Integrated circuit,Thyristor,diodes,transistors,capacitors,relaysconnectors,switches, led,sensor,in...
Get in touch with us
Leave a Message, we will call you back quickly!