Hangzhou Suntech Machinery Co., Ltd.
| Payment Terms | T/T, Western Union, MoneyGram |
| Supply Ability | 2000pcs/momth |
| Delivery Time | ONE MONTH |
| Packaging Details | POLYWOOD |
| Product name | hydrostatic Top quality Semi-Automatic Hydraulic butt fusion of hdpe SHT800-SHY manufactures |
| Application | weld pipes and fittings with material pe pipe，hdpe pipe |
| Pipe size | 630, 710, 800 |
| Heating Plate Power | 12.5 Kw |
| Total power | 16.2 Kw |
| Heating plate max. temp | 270℃ |
| Frame packing | 1900*1360*1400mm |
| Heating plate packing | 1100*720*1620mm |
| Control box packing | 790*560*510mm |
| G.W./N.W.: | 1200 Kgs |
| Brand Name | SUNTECHMACH |
| Model Number | SHT800-SHY |
| Certification | ISO9001 |
| Place of Origin | ZHEJIANG, CHINA |
View Detail Information
Explore similar products
Hdpe Pipe Jointing Digital Heater SHT200-4(A) 200mm Auto Operation
China factory 160mm manual automatic poly Hydraulic Butt Fusion plastic PE Pipe
Hydraulic Pressure Hdpe Butt Fusion Welding Machine 63mm - 200mm
200mm Butt Fusion Plastic PE Pipe Welding Machine Manual Automatic Poly Hot Melt
Product Specification
| Payment Terms | T/T, Western Union, MoneyGram | Supply Ability | 2000pcs/momth |
| Delivery Time | ONE MONTH | Packaging Details | POLYWOOD |
| Product name | hydrostatic Top quality Semi-Automatic Hydraulic butt fusion of hdpe SHT800-SHY manufactures | Application | weld pipes and fittings with material pe pipe，hdpe pipe |
| Pipe size | 630, 710, 800 | Heating Plate Power | 12.5 Kw |
| Total power | 16.2 Kw | Heating plate max. temp | 270℃ |
| Frame packing | 1900*1360*1400mm | Heating plate packing | 1100*720*1620mm |
| Control box packing | 790*560*510mm | G.W./N.W.: | 1200 Kgs |
| Brand Name | SUNTECHMACH | Model Number | SHT800-SHY |
| Certification | ISO9001 | Place of Origin | ZHEJIANG, CHINA |
| High Light | hydrostatic Semi Automatic Fusion Welding Equipment ，Hdpe hydrostatic Fusion Welding Equipment ，16.2 Kw Fusion Welding Equipment | ||
SHT800-SHY Hdpe Pipe Plastic Butt Fusion Welding Machine with heating plate
Close the two pipe ends and check the alignment of both ends. The misalignment at both ends of the pipe should not exceed 10% of the wall thickness.The part outside the frame of the pipe shall be supported by supports to reduce friction, and then be fastened with slips.
Butt Fushion Welding Machine Technical data:
| SHT800 -SHY | Working Range | |
| Caliber (mm) | 630, 710, 800 | |
| Heating board max temp. | 270 °C | |
| Temperature bias | “+/-5° | |
| Pressure adjustment range | 0-10Mpa | |
| Heating plate power | 12.5 Kw | |
| Power of Heating plate: | 2.2 Kw | |
| Hydraulic unit power | 1.5 Kw | |
| Total power | 16.2 Kw | |
| G.W./N.W.: | 1200 Kgs | |
| Packing size: | 190*136*140cm | |
| 110*72*162cm | ||
| 79*56*51cm |
Welding procedure
1. Check whether the specification and pressure grade of the pipe to be welded are correct, and check whether there are bumps, bumps and scratches on the surface. If the depth of the scar exceeds 10% of the wall thickness of the pipe, it should be partially removed before use;
2. Clean the oil or foreign matters at both ends of the pipe with a clean cloth;
3. Place the pipe to be welded in the frame slip, so that the length of both ends is equal (as short as possible without affecting the milling and heating). The part outside the frame of the pipe shall be supported by supports to reduce friction, and then be fastened with slips;
4. Put in the milling cutter, first turn on the power switch of the milling cutter, then close both ends of the pipe and apply appropriate pressure until there are continuous chips at both ends, remove the pressure, wait for a moment, then withdraw the movable frame, turn off the power supply of the milling cutter and take out the milling cutter. The chip thickness should be about 0.2-0.5mm. The chip thickness can be adjusted by adjusting the height of the milling insert;
5. Close the two pipe ends and check the alignment of both ends. The misalignment at both ends of the pipe should not exceed 10% of the wall thickness, which can be improved by adjusting the straightness and the elastic slip of the pipe; the gap between the two ends of the pipe should not exceed 10% of the wall thickness, otherwise it should be milled again until the above requirements are met;
6. Clean the dust and residue on the surface of the heating plate (pay special attention not to scratch the nonstick layer on the surface of the heating plate);
7. After the temperature of the heating plate reaches the set value, put it into the rack and apply the specified pressure until the minimum crimping on both sides reaches the specified value;
8. Reduce the pressure to the contact pressure and continue heating for the specified time;
9. When the time is up, withdraw the movable frame, quickly take out the heating plate, and then close the two pipe ends, with the time interval as short as possible;
10. Raise the pressure to the specified welding pressure, lock the fixing bolts on both sides of the frame, and keep the pressure for natural cooling. After cooling for the specified time, the fixing bolt is fully opened. Loosen the slip and take out the connected pipe.
Our service:
1) We offer 1 year warranty and free spare parts. (Except for wearing parts)
2) We offer voltage and frequency of motor customization service, such as 110v 60hz.
3) We can put your LOGO on machine plate or packing (need your authorization on brand)
4) Machine can be shipped to overseas or domestic place by sea or air in LCL or FCL.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent
Year Established:
2013
Total Annual:
10,000,000-50,000,000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Hangzhou Suntech Machinery Co.,Ltd. is a professional manufacturer of pipe tools. We are located in Hangzhou city of China. From metal pipes to plastic pipes, we offer a wide variety of plumbing tools for on-site working. Our machines have already been exported to many countries and are widely know... Hangzhou Suntech Machinery Co.,Ltd. is a professional manufacturer of pipe tools. We are located in Hangzhou city of China. From metal pipes to plastic pipes, we offer a wide variety of plumbing tools for on-site working. Our machines have already been exported to many countries and are widely know...
Get in touch with us
Leave a Message, we will call you back quickly!