STG9A 1'' - 8'' Roll Groover Machine from China with folding carriage for easy

Product Specification

1″-8″ pipe grooving machine SCH40 STG9A folding roll grooving machine is as small and easy to carry as STG-VAR roll grooving machine.

But the working capacity is a wider range of work than the model No. STG-VAR. The working capacity is 1″ to 8″ SCH40 steel pipe.

The machine foot is designed with folding carriage.

● New model of STG-9A, it is more efficient and stable
● Equipped with stronger power and make roller change quick and simple
● Equipped with the new designed folding carriage, it is simple to assemble and move it

Model: STG9A
Machining size: 1″-8″(Φ33-Φ219) SCH40 steel pipe
Pipe wall-thickness: : 8mm
Speed: 23rpm
Motor: 750w
G.W.: 82kgs
Packing size: 76*44*72cm
Standard with 4 pcs knurl wheels and 3 pcs pinch roller and a pipe stand

Standard Equipment
* For SCH40 steel pipe
Knurl wheel φ33-φ48
Knurl wheel φ57-φ89
Knurl wheel φ108-φ168
Knurl wheel φ219
Pinch roller φ33-φ48
Pinch roller φ57-φ168
Pinch roller φ219
Pipe stand

PICTURES FOR ROLL GROOVER MACHINE 1''-6''

OPERATION OF ROLL PIPE GROOVING MACHINE
Choose the right pinch roller and knurl wheel and install them onto the roll grooving machine.
Put the pipe on the knurl wheel and pipe stands. The pipe stands should be placed at the position of 3/4 length of pipe. Then adjust the pipe stands height to make sure the pipe are 1 degree lower than the horizantal level.
Tighten the relief valve, shake the hydraulic pump handle, let the pinch roller going downward until it touch the surface of pipe end. Rotate the limit nut down, make it contact with the oil pump top frame. Check the correct data of groove depth for different diameter pipes in the chart. For instance, if we roll groove on a 8 inch pipe, the depth will be 2.34mm. Calculate from the red start line, rotate the limit nut 2.34mm up, then turn the fastening nut down until it touch the limit nut and fix it. (One circle rotation on the limit nut is equal to 2.5mm) Rotate the side guide wheel to support the pipe. Release the relief valve.
Connect the power plug, turn on the switch to run the machine. Tighten the relief valve again and pump the handle to start grooving. Continue to swing the handle until the limit nut reach the oil pump top (Please do not swing too fast). Allow the pipe to rotate additional one or two turns to make sure the groove is completed. At last turn off the switch and release the relief valve knob. Rotate the guide wheel to make it away from the pipe. Remove the pipe and check the groove depth with a pipe groove measuring tape.

FAQ

1. WHO ARE WE?
We are professional pipe machine manufacturer located in Hangzhou city of China starts from 1989, we are close to Port Shanghai, Ningbo as well as Yiwu. We mainly export to North and South America, South Asia and the Middle East countries. Our client are power tools wholesaler and comnpany for specific constrution project such as fire fighting pipeline building etc.
2. HOW CAN WE GUARANTEE THE QUALITY?
We always test at least one pipe on every pipe machine before we ship out.
Some of our heavy duty models works well after even 7 or 8 years according to our client feedback, for all of our machine we offer 12 month warranty.
3. WHAT CAN YOU BUY FROM US?
All kind of pipe tools and plumbing tools, such as pipe threading machine, pipe grooving machine, pipe cutting machine, pipe hole cutter, manual pipe bender, pipe vice as well as the test pump.
4. HOW TO SHIP?
We ship by sea to port for bulk order and we also ship to door for small shipment.
5. WHAT IS THE MOQ?
Basically there is no MOQ required for our machines, we can ship any quantity but it is highly recommened to make order amount not less than USD2000.00, because according to our experience if the order are too small amount the sea shipping adding tarrif makes it not cost-effective to buy oversea.
6. IS OEM ACCEPTABLE?
Yes. For bulk order we can make nameplate and customized packaging in client’s brand.