Rexroth Solenoid Valve Z4S6-12 V Safety And Compatibility With Your Medium S

Product Specification

Product Description

Selection principle Security:1, corrosive media: plastic king solenoid valve and stainless steel should be selected; For the strong corrosion of the medium must be selected isolation diaphragm type. Neutral medium, it is also appropriate to choose copper alloy as the valve shell material of the solenoid valve, otherwise, the valve shell often has rust chips off, especially in the case of infrequent action. Ammonia valves can not be made of copper.2, explosive environment: must choose the corresponding explosion-proof grade products, open installation or dust occasions should choose waterproof, dust-proof varieties.3, the nominal pressure of the solenoid valve should exceed the highest working pressure in the tube.
Applicability:1. Medium characteristics1) Quality gas, liquid or mixed state respectively choose different varieties of solenoid valve;2) The medium temperature of different specifications of products, otherwise the coil will burn, seal aging, seriously affect the service life;3) Medium viscosity, usually below 50cSt. If this value is exceeded, when the diameter is greater than 15mm, use a multi-function solenoid valve; When the diameter is less than 15mm, use a high-viscosity solenoid valve.4) When the cleanliness of the medium is not high, the recoil-filter valve should be installed before the solenoid valve. When the pressure is low, the direct-acting diaphragm solenoid valve can be selected;5) If the medium is directional circulation, and reverse flow is not allowed, two-way circulation is required;6) The medium temperature should be selected within the allowable range of the solenoid valve.

2. Pipeline parameters1) Select the valve port and model according to the medium flow direction requirements and pipeline connection mode;2) The nominal diameter is selected according to the flow rate and Kv value of the valve, and the inner diameter of the pipeline can also be selected;3) Working pressure difference: the lowest working pressure difference above 0.04Mpa can be used indirect pilot type; If the minimum working pressure difference is close to or less than zero, the direct acting type or step by step type must be selected.3. Environmental conditions
1) The maximum and minimum temperature of the environment should be selected within the allowable range;2) When the relative humidity in the environment is high and there are water droplets and rain, waterproof solenoid valve should be selected;3) Special varieties should be selected for occasions such as vibration, turbulence and shock in the environment, such as Marine solenoid valves;4) Use in corrosive or explosive environments should be preferentially selected according to safety requirements of corrosion-resistant type;5) If the environmental space is limited, it is necessary to choose a multi-functional solenoid valve, because it eliminates the bypass and three manual valves and is convenient for online maintenance.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.