Fujian zhichuan mechanical equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 10PCS/days |
| Delivery Time | 3days |
| Packaging Details | wooden case/carton |
| Brand | SUN |
| Model | CBCG-LJN |
| Cavity | T-11A |
| Series | 1 |
| Capacity | 15 gpm |
| Pilot Ratio | 4.5:1 |
| Maximum Recommended Load Pressure at Maximum Setting | 3850 psi |
| Maximum Setting | 5000 psi |
| Brand Name | SUN |
| Model Number | CBCG-LJN |
| Certification | cc |
| Place of Origin | American |
View Detail Information
Explore similar products
SUN hydraforceNFFD-LIN Cartridge valves The spool action is sensitive and the
SUN Overflow Valve PBFB-LAN With Overflow Valve Pilot Operated For Multiple
SUN PBDB-LAN Cartridge valvesGood sealing, small leakage, oil flow through the
SUN Overflow Valve NFEC-LEN For Bi-Directional Flow Control NFEC-LEN T-16A
Product Specification
| Payment Terms | T/T | Supply Ability | 10PCS/days |
| Delivery Time | 3days | Packaging Details | wooden case/carton |
| Brand | SUN | Model | CBCG-LJN |
| Cavity | T-11A | Series | 1 |
| Capacity | 15 gpm | Pilot Ratio | 4.5:1 |
| Maximum Recommended Load Pressure at Maximum Setting | 3850 psi | Maximum Setting | 5000 psi |
| Brand Name | SUN | Model Number | CBCG-LJN |
| Certification | cc | Place of Origin | American |
| High Light | CBCG-LJN SUN Cartridge Valve ，Over-Center Applications SUN Cartridge Valve ，Motion Control SUN Cartridge Valve | ||
Product Description
Counterbalance valves with pilot assist are meant to control an overrunning load. The check valve allows free flow from the directional valve (port 2) to the load (port 1) while a direct-acting, pilot-assisted relief valve controls flow from port 1 to port 2. Pilot assist at port 3 lowers the effective setting of the relief valve at a rate determined by the pilot ratio.Other names for this valve include motion control valve and over-center valve. Counterbalance valves should be set at least 1.3 times the maximum load induced pressure.Turn adjustment clockwise to decrease setting and release load.Full clockwise setting is less than 200 psi (14 bar).Backpressure at port 2 adds to the effective relief setting at a ratio of 1 plus the pilot ratio times the backpressure.Reseat exceeds 85% of set pressure when the valve is standard set. Settings lower than the standard set pressure may result in lower reseat percentages.Sun counterbalance cartridges can be installed directly into a cavity machined in an actuator housing for added protection and improved stiffness in the circuit.
Two check valve cracking pressures are available. Use the 25 psi (1,7 bar) check unless actuator cavitation is a concern.All 3-port counterbalance, load control, and pilot-to-open check cartridges are physically interchangeable (i.e. same flow path, same cavity for a given frame size).This valve does not have positive seals on the pilot section and will pass up to 3 in³/min.@1000 psi (45 ml/min.@70 bar ) between port 2 and port 3. This is a consideration in master-slave circuits and in the leak testing of valve-cylinder assemblies.Cartridges configured with EPDM seals are for use in systems with phosphate ester fluids. Exposure to petroleum based fluids, greases and lubricants will damage the seals.Corrosion-resistant cartridge valves are intended for use in corrosive environments and are identified by the model code suffix /AP for external stainless steel components, or /LH for external zinc-nickel plated components. See the CONFIGURATION section for all options. For further details, please see the Materials of Construction page located under TECH RESOURCES.Incorporates the Sun floating style construction to minimize the possibility of internal parts binding due to excessive installation torque and/or cavity/cartridge machining variations.
| Brand | SUN |
| Model | CBCG-LJN |
| Model Weight | 0.35 lb. |
| Locknut Torque | 80 - 90 lbf in. |
| Locknut Hex Size | 9/16 in. |
| Adjustment Screw Internal Hex Size | 5/32 in. |
| Valve Installation Torque | 30 - 35 lbf ft |
| Valve Hex Size | 7/8 in. |
| Reseat | >85% of setting |
| Operating Characteristic | Standard |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.
Company Details
Business Type:
Manufacturer,Agent
Year Established:
2011
Total Annual:
1000000-5000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Fujian Zhichuan Mechanical Equipment Co., Ltd. is a company specializing in the import of electronic hydraulic products trade and sales.Our aim is to provide our customers with high quality imported machinery products andexcellent after-sales service. Our main business covers the fields of construct... Fujian Zhichuan Mechanical Equipment Co., Ltd. is a company specializing in the import of electronic hydraulic products trade and sales.Our aim is to provide our customers with high quality imported machinery products andexcellent after-sales service. Our main business covers the fields of construct...
Get in touch with us
Leave a Message, we will call you back quickly!