Fujian zhichuan mechanical equipment Co., Ltd.
| Payment Terms | T/T |
| Supply Ability | 10PCS/days |
| Delivery Time | 3days |
| Packaging Details | wooden case/carton |
| Brand | Rexroth |
| Model | PGH5-30 125RE11VU2 |
| Design | Internal gear pump |
| Line connection | Flange port |
| HLP fluid | –10 to +80°C |
| Special fluid | –10 to +50°C |
| Ambient temperature range | –20 to +60°C |
| Viscosity range | 10 to 300 (to n = 1800 min-1) |
| Brand Name | Rexroth |
| Model Number | PGH5-30 125RE11VU2 |
| Certification | cc |
| Place of Origin | German |
View Detail Information
Explore similar products
Rexroth Electric Gear Pump AZPF-12-004RNF20MB Strong Self Suction
Rexroth Compact Sigma Hydraulic Gear Pump AZPSS-22-019/011LRC2020KB
Hydraulic Rexroth Tandem Pump Gear AZPF-12-008RHO30KB
OEM Rexroth Hydraulic Gear Pump 0510425009 AZPF-11-008RCB20MB
Product Specification
| Payment Terms | T/T | Supply Ability | 10PCS/days |
| Delivery Time | 3days | Packaging Details | wooden case/carton |
| Brand | Rexroth | Model | PGH5-30 125RE11VU2 |
| Design | Internal gear pump | Line connection | Flange port |
| HLP fluid | –10 to +80°C | Special fluid | –10 to +50°C |
| Ambient temperature range | –20 to +60°C | Viscosity range | 10 to 300 (to n = 1800 min-1) |
| Brand Name | Rexroth | Model Number | PGH5-30 125RE11VU2 |
| Certification | cc | Place of Origin | German |
| High Light | Ventilation Filters Gear Pump ，Rexroth Gear Pump PGH5-30 ，Pressure Compensation Gear Pump | ||
Product Description
In the reservoir construction or the selection of suitable standard reservoirs, the following requirements are to be observed:Selection of the largest reservoir volume possible, depending on the continuous or average flow, in order to allow for the separation of air bubbles by means of enough dwell
time of the medium in the reservoir. In this connection, the air separation capability of the fluid used is also important.Provision of settling zones for the fluid in the reservoir in order to allow for air separation.Provision of guiding plates in order to allowing for the deposit of contamination at the reservoir bottom outside the pump suction area.Large dimensioning of the reservoir surfaces depending on the heat output to be dissipated via the reservoir walls.
Hydraulic power units should at least be equipped with the following features:Reservoirs, the internal pressure of which corresponds to the ambient pressure in accordance with the design, have to be equipped with ventilation filters for pressure compensation purposes.The fluid should be filled by means of filling connections only excluding filling with unfiltered fluid.Pollution or humidity must be prevented from getting into the system. When using the pump in a highly polluted environment, the reservoir is to be pre-tensioned by means of air pressure for this. If cleansing of the external reservoir side is intended or to be expected during the period of use, reservoir fittings for tubes, lines, or hoses have to be selected,which ensure safe seal against external pressurization with water jet.With places of installation from a geodetic height of more than 1000 m, the pump is to be arranged in or below the reservoir or the reservoir is to be pre-tensioned by means of compressed air in order to comply with the admissible minimum inlet pressure. The suction line is to be selected short and with a large cross-section, bends should not be used.When installing the pump more than 10 m below the reservoir,the reduction of the inlet pressure to the maximum admissible value has to be ensured by means of additional measures.When operating the pump in salt-containing or corrosive environments or when pressurization with strongly abrasive substances is possible, it has to be ensured on the system side that the shaft seal ring and the sealing area of the shaft do notmake direct contact with the environment.
| Brand | Rexroth |
| Model | PGH5-30 125RE11VU2 |
| Size | 125 |
| Weight | 48kg |
| Speed range nmin | 200 min-1 |
| nmax | 3000 min-1 |
| Displacement | 125.3 cm3 |
| Flow | 179.8 l/min |
| Moment of inertia | 0.00407 kgm2 |
| Power consumption | 4KW |
FAQ
Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.
Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.
Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.
Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.
Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.
Company Details
Business Type:
Manufacturer,Agent
Year Established:
2011
Total Annual:
1000000-5000000
Employee Number:
50~100
Ecer Certification：
Verified Supplier
Fujian Zhichuan Mechanical Equipment Co., Ltd. is a company specializing in the import of electronic hydraulic products trade and sales.Our aim is to provide our customers with high quality imported machinery products andexcellent after-sales service. Our main business covers the fields of construct... Fujian Zhichuan Mechanical Equipment Co., Ltd. is a company specializing in the import of electronic hydraulic products trade and sales.Our aim is to provide our customers with high quality imported machinery products andexcellent after-sales service. Our main business covers the fields of construct...
Get in touch with us
Leave a Message, we will call you back quickly!