AVENTICS 0821300353 Filter Pressure Regulator Valve Safety New Original

Product Specification

Product Description:

Features of the Aventics filter pressure regulator include:

Filtration and pressure regulation function: The filter pressure regulator first filters impurities and particulate matter in the fluid through the filter element, and then controls and adjusts the fluid pressure through the pressure regulator to ensure that the fluid pressure is within the preset range. When the pressure is higher than the set value, the valve core will automatically open to allow the fluid to flow through the opening; when the pressure is lower than the set value, the valve core will automatically close to prevent fluid loss.

Structural features: The Aventics filter pressure regulator is usually composed of a filter, a pressure control valve and other parts. The overall structure is compact and suitable for installation in a vertical position. Its working medium is compressed air or neutral gas, the medium temperature range is -10°C to +50°C, and the ambient temperature range is also -10°C to +50°C.

Performance features: The pressure regulator has a large diameter corrugated diaphragm to improve pressure sensitivity; metal-metal diaphragm seal is used to ensure good sealing performance; large flow design, small pressure drop; optional panel installation, easy to use and maintain.

‌Precautions for use‌:

‌Environmental requirements‌: Pneumatic valves should be installed in an ambient temperature range of -25℃ to 60℃, with a relative humidity not exceeding 95%. If installed in open air or high temperature places, waterproof and cooling measures must be taken. In places with vibration sources, keep away from vibration sources or add anti-vibration measures‌.

‌Installation requirements‌: Pneumatic valves should be installed vertically, and can be tilted in special cases. Before installation, the pipeline should be cleaned to remove dirt and welding slag. After installation, the valve should be cleaned again to ensure that no impurities remain in the valve body. After using the handwheel mechanism, it should be restored to the original neutral position‌.

‌Operation requirements‌: Pneumatic valves should be closed clockwise during operation, and the number of opening and closing revolutions should not be too many. Large-diameter valves should be within 200-600 revolutions. In order to facilitate one person's operation, the maximum opening and closing torque should be 240N-m. The display panel of the opening and closing degree of the pneumatic valve should face the ground for direct operation‌.

Maintenance: In order to allow the production process to continue in the event of a failure or repair of the pneumatic valve, a bypass line should be added to the control valve. At the same time, attention should be paid to whether the installation position of the control valve meets the requirements of the process.

FAQ

Q1: Wonder if you accept small orders?
A1: Do not worry. Feel free to contact us .in order to get more orders and give our clients more convener ,we accept small order.

Q2: Can you send products to my country?
A2: Sure, we can. If you do not have your own ship forwarder, we can help you.

Q3: What's your payment terms ?
A3: By T/T,LC AT SIGHT,100% full payment.

Q4: How long is your production lead time?
A4:It depends on product and order qty. Normally, it takes us 15 days for an order with MOQ qty.

Q5: When can I get the quotation ?
A5: We usually quote you within 24 hours after we get your inquiry. If you are very urgent to get the quotation.Please call us or tell us in your mail, so that we could regard your inquiry priority.