Changsha Kaienli Hydraulic Technology Co., Ltd.
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram |
| Supply Ability | usually about 2 weeks, depends on which type and the quantity demand |
| Delivery Time | 2 or 3 weeks, depends on quantity and design |
| Packaging Details | Plastic film+PE bag+mesh packaging sleeve+sponge spacer+cardboard box+pallet |
| Product Name | KSV10-47B-0-N Support OEM ODM hydraulic system design Chinese manufacture for hydraulic solenoid valve |
| Cavity hole | VC10-4 hole |
| Pressure | 350 bar (5075 psi) |
| Flow rate | 22.7 lpm (6 gpm) maximum at 207 bar (3000 psi), 328 ml/Min maximum |
| working principle | 4 way 3 position valve |
| solenoid coil | DL, DT04-2P, DG DIN43650 |
| Valve Voltage | 12 or 24 voltage |
| Connector type | ER or DG or DL , as reqeusted |
| valve block | material : QT500-7 or 6061-T6 raw material |
| Temperature | -40°C to 120°C, standard nitrile rubber seal |
| Coil initial current at 20°C | Standard coil: 1.67 A at 12 VDC, Type E coil: 1.7 at 12 VDC |
| Installation torque | maximum 27Nm, installation hexagon: S24 |
| Brand | Kaienli |
| Brand Name | Kaienli |
| Model Number | KSV10-47B-0-N |
| Certification | Available |
| Place of Origin | China |
View Detail Information
Explore similar products
On Off Cartridge Solenoid Valve Replacement Hydraulic Cavity
Hydraforce 3 Position 4 Way Spool Solenoid Valve Double Coil
Customized Cartridge Solenoid Valve 4 Way 3 Position Hydraulic Valve
Energized Dual Coil Cartridge Solenoid Valve Hydraulic 4 Way 3 Position
Product Specification
| Payment Terms | L/C, D/A, D/P, T/T, Western Union, MoneyGram | Supply Ability | usually about 2 weeks, depends on which type and the quantity demand |
| Delivery Time | 2 or 3 weeks, depends on quantity and design | Packaging Details | Plastic film+PE bag+mesh packaging sleeve+sponge spacer+cardboard box+pallet |
| Product Name | KSV10-47B-0-N Support OEM ODM hydraulic system design Chinese manufacture for hydraulic solenoid valve | Cavity hole | VC10-4 hole |
| Pressure | 350 bar (5075 psi) | Flow rate | 22.7 lpm (6 gpm) maximum at 207 bar (3000 psi), 328 ml/Min maximum |
| working principle | 4 way 3 position valve | solenoid coil | DL, DT04-2P, DG DIN43650 |
| Valve Voltage | 12 or 24 voltage | Connector type | ER or DG or DL , as reqeusted |
| valve block | material : QT500-7 or 6061-T6 raw material | Temperature | -40°C to 120°C, standard nitrile rubber seal |
| Coil initial current at 20°C | Standard coil: 1.67 A at 12 VDC, Type E coil: 1.7 at 12 VDC | Installation torque | maximum 27Nm, installation hexagon: S24 |
| Brand | Kaienli | Brand Name | Kaienli |
| Model Number | KSV10-47B-0-N | Certification | Available |
| Place of Origin | China | ||
| High Light | Hydraulic System Cartridge Solenoid Valve ，OEM Cartridge Solenoid Valve ，ODM Cartridge Solenoid Valve | ||
Product Pictures:
KSV10-47B-0-N Support OEM ODM hydraulic system design Chinese manufacture for hydraulic solenoid valve
Working principle:
When the power is off, the KSV10-47B-0-N cylinder oil port is connected, and ③ and ① are connected at the same time. When coil 1 is energized, it allows oil to flow from ③ to ④, and from ② to ①. When coil 2 is energized, oil can flow from ③ to ②, and from ④ to ①. In the oil circuit where the flow rate of the working oil port is unbalanced due to the area ratio of the oil cylinder, the return oil with a larger flow rate should be directed into the oil port ②. Although port ① can be fully pressurized, it is not used as the valve inlet. How to operate the emergency hand control option: During emergency operation, push the knurled handle to control the function of coil 2 (S2), or pull the knurled handle to control the function of coil 1 (S1).
Characteristics:
Working pressure: 240 bar (3000 psi)
Pressure resistance: 350 bar (5075 psi)
Flow: 22.7 lpm (6 gpm) maximum at 207 bar (3000 psi), 328 ml/Min maximum
Temperature range: -40°C to 120°C, standard nitrile rubber seal
Coil rated load: Continuous operation within 85% to 115% of rated voltage range
Initial coil current at 20°C: Standard coil: 1.67 A at 12 VDC, 115 VAC (full wave rectified)
0.18 A at a time. E-coil: 1.7 A at 12 VDC; 0.85 A at 24 VDC
Minimum pick-up voltage: 85% of rating at 207 bar (3000 psi)
Medium: Mineral oil with viscosity between 7.4~420cSt (50~2000ssu) or synthetic oil with lubricating effect
Valve hole: VC10-4;
Product technical data:
Product real pictures :
Company Exhibitions:
Our Certificate:
Product processing procedures:
Our new factory and workshop :
Our warehouse:
Shipment:
Different Series of Product , more details please contact us directly:
Hydraulic valves:
| Type 1 | soloenid valve |
| Type 2 | manual cartridge valve |
| Type 3 | 2 way 2 position solenoid valve |
| Type 4 | 2 way 6 position solenoid valve |
| Type 5 | 2 way 8 position solenoid valve |
| Type 6 | Pilot oil resource valve |
| Type 7 | explosion proof valve |
| Type 8 | balance valve |
| Type 9 | check valve |
| Type 10 | Hydraulic lock |
| Type 11 | Valve manifolds |
| Type 12 | valve block |
Welcome your visit and inquiry !
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2011
Total Annual:
2000-3000
Employee Number:
100~150
Ecer Certification：
Verified Supplier
Hunan Kaienli Hydraulic Machinery Manufacturing Co., Ltd., founded in 2011. and Changsha Kaienli Hydraulic Technology Co.,Ltd, we are the same company, Changsha Kaienli mainly responsible overseas selling and export , while Hunan Kaienli mainly responsible for design, manufacturing an... Hunan Kaienli Hydraulic Machinery Manufacturing Co., Ltd., founded in 2011. and Changsha Kaienli Hydraulic Technology Co.,Ltd, we are the same company, Changsha Kaienli mainly responsible overseas selling and export , while Hunan Kaienli mainly responsible for design, manufacturing an...
Get in touch with us
Leave a Message, we will call you back quickly!