SHANGHAI UNITE STEEL
| Payment Terms | L/C, T/T |
| Supply Ability | 1000 Ton/Tons per Month |
| Delivery Time | 5-8 work days |
| Packaging Details | In bundles, plywood cases, wooden cases with water-proof package,or as customer required |
| Steel Grade: | mould steel |
| Model Number: | DIN 1.2365, H10 |
| Application: | industry |
| Delivery Condtion: | rolled, forged |
| Alloy Or Not: | Is Alloy |
| Place of Origin: | Hubei, China |
| Brand Name | UST |
| Model Number | 1.2365 32CrMoV12-28 H10 |
| Certification | ISO 9001:2008 |
| Place of Origin | CHINA |
View Detail Information
Explore similar products
P20 + Ni Hot Forged Plastic Mould Tool Steel Bar With Turned Surface
Cold Work Tool Steel Rod , Dc53 Hot Forged Alloy Steel Round Bar Higher Hardness
Din1.2713 Hot Rolled Tool Steel Round Bar Hot Work With Black / Turned Surface
Hot Forged / Rolled Tool Steel Round Bar D3 / Cr12 / DIN1.2080 / SKD1 Steel
Product Specification
| Payment Terms | L/C, T/T | Supply Ability | 1000 Ton/Tons per Month |
| Delivery Time | 5-8 work days | Packaging Details | In bundles, plywood cases, wooden cases with water-proof package,or as customer required |
| Steel Grade: | mould steel | Model Number: | DIN 1.2365, H10 |
| Application: | industry | Delivery Condtion: | rolled, forged |
| Alloy Or Not: | Is Alloy | Place of Origin: | Hubei, China |
| Brand Name | UST | Model Number | 1.2365 32CrMoV12-28 H10 |
| Certification | ISO 9001:2008 | Place of Origin | CHINA |
| High Light | tool steel rod ，tool steel round bar | ||
Features:
1. Competitive price
2. Immediate delivery
3. Premium quality
4. Reliable service
5. MOQ: 1 Ton
| Packing details | In seaworthy packing, as your requirement. |
| Delivery details | within 30-50 days |
Chemical Composition:
| Grade | C | Si | Mn | P | S | Cr | Mo | V |
| 1.2365 |
0.35- 0.45 |
0.80- 1.25 |
0.20- 0.70 |
0.030 max | 0.030 max |
3.00- 3.75 |
2.00- 3.00 |
0.25- 0.75 |
DIN 1.2365 H10 Hot Work Tool Steel
Similar Grade: DIN 1.2365, H10
Shape: Round, Flat, Square.
Size Range:
| Diameter(mm) | Thickness (mm) | Width (mm) | Length(mm) | |
| Round | 50-420 | - | - | 2000-5800 |
| Square | 50-420 | - | - | 2000-5800 |
| flat | - | 20-200 | 80-600 | 2000-5800 |
Steel-making Condition: EF, EF/EAF+LF+VD, EF/EAF+ESR
Delivery Condition:
Annealed , Quenched + Tempered
Surface Condition:
Black, Grinded, Peeled, Rough turned, Polished
Heat Treatment:
FORGING: Heating for forging must be done slowly and uniformly. Soak through at 1900-2000°F, and reheat as often as necessary, stopping work when the temperature drops below 1650°F. After forging cool slowly in lime, mica, dry ashes or furnace. H10 hot work tool steel should always be annealed after forging.
ANNEALING: Heat slowly to 1550-1650°F, hold until the entire mass is heated through, and cool slowly in the furnace (40°F per hour) to about 1000°F, after which the cooling rate may be increased. Suitable precautions must be taken to prevent excessive carburization or decarburization.
SRAIN RELIEVING: stress reliving when desirable to relieve the strains of machining, heat slowly to 1050-1250°F, allow to equalize, and then cool in still air.
HARDENING: Warm slightly before charging into the preheat furnace, which should be operating at about 1400-1500°F. 1.2365 hot work tool steel is a very deep hardening steel, and although oil quenching may be used where maximum hardness is required, air hardening is recommended for most applications. The use of salt bath or controlled atmosphere furnace is desirable to minimize decarburization, and if not available, pack hardening spent pitch temperature employed Annealing is usually in the range of 1800-1900°F.
TEMPERING: Tempering practice may vary with size and application, but is usually performed in the temperature range of maximum secondary hardness or higher double tempering is recommended.
Forging dies for steel, mandrels, dies, die holder bolsters and dummy blocks, punches, die inserts, gripper and header dies, hot shears, aluminum die casting dies.
Product Description:
1.2365 Chromium hot work tool steel has excellent resistance to softening at high temperatures. This particular grade is resisitant to thermal fatigue cracking and can be cooled in water for servicing.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Trading Company,Seller
Year Established:
2010
Total Annual:
10000000-25000000
Employee Number:
50~110
Ecer Certification：
Active Member
We, Shanghai Unite Steel are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national... We, Shanghai Unite Steel are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national...
Get in touch with us
Leave a Message, we will call you back quickly!