SHANGHAI UNITE STEEL
| Payment Terms | L/C, T/T, D/A, D/P |
| Supply Ability | 1000 Metric Tons per Month |
| Delivery Time | 15-35 days |
| Packaging Details | In standard export packing and seaworthy material with rectangular shape bundle, covered with tarpaulin, in ontainers or in bulk, or upon request |
| Matrial | Alloy Steel |
| Standard | GB, ASTM, DIN,JIS |
| Grade | 1045 / C45 CK45 1.1191/ EN8 / 080M40 |
| Diameter | 4-1600mm |
| Length | Below 16 meters |
| Shape | Round bar |
| Techniques | Cold drawn; Hot rolled; Cold rolled; Forged |
| Surface | Black, Bright, Polished, Peeled, or upon request |
| Ultrasonic Test | 100% UT Passed |
| Processing | Annealed or Quenched and tempered provided |
| End | Beveled, plain end as required |
| Quality Inspection | SGS, BV etc. |
| Service | Cutting service and 3rd party inspection is provided |
| Brand Name | UST |
| Model Number | ASTM 1045 |
| Certification | ISO 9001:2008 |
| Place of Origin | MAINLAND CHINA |
View Detail Information
Explore similar products
EU Din1.8509 Forged Steel Bar Aluminum Alloy Nitriding Steel Grade For
St52 Hot Forged Steel Round Bars With Black / Turned / Grinded Surface
Engineering EN 35NiCr6 1.5815 Hot Forged Alloy Steel Bar
Dia 800mm AISI A2317 Hot Forged Structural Steel Bars
Product Specification
| Payment Terms | L/C, T/T, D/A, D/P | Supply Ability | 1000 Metric Tons per Month |
| Delivery Time | 15-35 days | Packaging Details | In standard export packing and seaworthy material with rectangular shape bundle, covered with tarpaulin, in ontainers or in bulk, or upon request |
| Matrial | Alloy Steel | Standard | GB, ASTM, DIN,JIS |
| Grade | 1045 / C45 CK45 1.1191/ EN8 / 080M40 | Diameter | 4-1600mm |
| Length | Below 16 meters | Shape | Round bar |
| Techniques | Cold drawn; Hot rolled; Cold rolled; Forged | Surface | Black, Bright, Polished, Peeled, or upon request |
| Ultrasonic Test | 100% UT Passed | Processing | Annealed or Quenched and tempered provided |
| End | Beveled, plain end as required | Quality Inspection | SGS, BV etc. |
| Service | Cutting service and 3rd party inspection is provided | Brand Name | UST |
| Model Number | ASTM 1045 | Certification | ISO 9001:2008 |
| Place of Origin | MAINLAND CHINA | ||
| High Light | Forged Round Bar ，Forged Steel Bars ，Forged Steel Round Bars | ||
ASTM 1045 / DIN C45 CK45 1.1191 EN8 / 080M40 Carbon Steel Bar / Rod
INTRODUCTION
Steel 1045 Round Bar is an unalloyed medium carbon steel, which is also a general carbon engineering steel. 1045 is a medium strength steel with good machinability and excellent tensile properties. 1045 round steel is generally supplied in the black hot rolled or occasionally in the normalised condition, with a typical tensile strength range 570 – 700 Mpa and Brinell hardness range 170 – 210 in either condition. It does not however respond satisfactorily to nitriding due to a lack of suitable alloying elements.
1045 round bar steel is equivalent to EN8 or 080M40. Steel 1045 bar or plate is suitable for the manufacture of parts such as gears, bolts, general-purpose axles and shafts, keys and studs.
Applications of AISI 1045 Steel
DIN C45 round bar steel material and steel plate C45, flats are widely used in all industry for uses which require more strength and wear resistance than the low carbon mild steel.
Quenched and subsequently tempered steel for C45 steel grade round bar, steel plate, flat and square is used for axles, bolts, forged connecting rods, crankshafts, torsion bars, light gears, guide rods, screws, forgings, wheel tyres, shafts, sickles, axes, knives, wood working drills, hammers, etc.
- Dimension: Diameter 4-1600 mm, any length below 16 meters
- Delivery Conditions:
Cold drawn: 4-100 mm
Peeled: 30-160 mm
Grinded: 4- 600 mm
Turned: 130-1200 mm
Hot rolled: 12-320 mm
Hot forged: 130-1600 mm
- EAF+(ESR) or EAF+LF+VD+(ESR)
- HOT rolled; Cold rolled; Forged; Cold Drawn
- Heat Treatment: Untreated, Annealing, N+T, Q+T
- Smelting: EAF+LF+VD (+ESR)
- Surface Finish: Black, Rough Machined, Peeled, Turned or upon request
- UT 100% passed
- Cutting service provided
- Third Party inspection is acceptable (SGS, BV etc.)
Equivalent Grades of 1045 Steel
| Country | USA | British | Japan | Australia |
| Standard | ASTM A29 | EN 10083-2 | JIS G4051 | AS 1442 |
| Grades | 1045 | C45/1.1191 | S45C | 1045 |
Chemical Requirements, Composition, %
| Standard | Grade | C | Mn | P | S | Si |
| ASTM A29 | 1045 | 0.43-0.50 | 0.60-0.90 | 0.04 | 0.050 | |
| EN 10083-2 | C45/1.1191 | 0.42-0.50 | 0.50-0.80 | 0.03 | 0.035 | 0.4 |
| JIS G4051 | S45C | 0.42-0.48 | 0.60-0.90 | 0.03 | 0.035 | 0.15-0.35 |
Mechanical properties
| Standard | Steel Grade | Yield strength MPa (>=) | Tensile strength MPa (>=) | Elongation % (>=) | Reduction of area % (>=) | Hardness Breinell |
| ASTM A29 | 1045 | 450 | 585 | 12 | 40 | 163 |
Quality Assurance
Below inspection will be done in the production.
(1) ray detection---RT;
(2) ultrasonic testing---UT;
(3) Magnetic Particle Testing-MT;
(4) penetration testing-PT;
(5) eddy current flaw detection-ET
PROCESSING
FORGING
C1045 is forged from around 2200ºF (1205ºC) down to a temperature in the range1650-1700ºF (900-925ºC.) The actual forging and finishing temperatures will depend on a number of factors, including overall reduction during forging and complexity of part being forged. Experience alone will determine near exact values for these two parameters.
Parts are air cooled after forging.
HEAT TREATMENT
ANNEALING
Full annealing of small C1045 forgings is carried out from 1450-1600ºF (790-870ºC)
followed by furnace cooling at 50ºF (28ºC) per hour, to 1200ºF (650ºC) soaking and air cooling.
NORMALIZING
The normalizing temperature for this grade is typically 1650-1700ºF (900-925ºC.)
Normalizing is followed by cooling in still air. When forgings are normalized before hardening and tempering or other heat treatment, the upper range of the normalizing temperature is used. When normalizing is the final treatment, the lower temperature range is used.
HARDENING
Hardening of this grade is carried out from an austenitizing temperature of 1475-1550ºF (800-845ºC) and oil or water quenching.
Flame and induction hardening may be carried out by heating quickly to the desired case depth and quenching in water or oil. This should be followed by a tempering treatment at 300-400ºF (150-200ºC) to reduce stresses in the case without affecting its hardness. A surface hardness of Rc 58 may be obtained by this treatment.
TEMPERING
Tempering after normal hardening and oil or water quenching is carried out at 750-1260 ºF (400-680ºC) to give the required mechanical properties as determined by practical experience.
MACHINABILITY
Machinability of C1045 is good providing the full annealing cycle described above is used, ensuring a coarse lamellar pearlite to coarse spheroidite microstructure.
WELDABILITY
This grade is readily welded with the correct procedure. Welding in the through hardened or flame or induction hardened conditions is not recommended.
Low-hydrogen electrodes are recommended together with preheat at 400-570ºF (200-300 ºC.) to be maintained during welding, Cool slowly in sand or ashes and stress relieve where possible.
What we can offer?
-We offer a wide range of steel products in a wide variety of dimensions and executions, according to the common international specifications or customize.
-Machining and heat treatment are available.
-Also, we advise you in choosing the right materials.
Shape Available
Our Advantages
OUR MAIN PRODUCTS ARE LISTED AS BELOW
Notes:
Available Size:
-Round: Dia. 4 -1600 mm
-Flat: T. 10-120 mm x W. 60-810 mm
-Block: T. 80-1200 mm x W. 100-1600 mm
PAYMENT AND SHIPPING
1. Both T/T and L/C will be acceptable
2. Trade Terms: FOB, CIF, CFR
3. The delivery will be in 10-15 days if have stock; For customized items, the delivery will be negotiated by both parties
4. Shipping by sea freight from Shanghai Port (PRC) for Bulk orders, by airfreight or express for samples
COMPANY INFORMATION
Shanghai Unite Steel Trading Co., Ltd
We are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national famous steel enterprise.
In the aspect of resources and information, we have established cooperative and stronger relationship with nearly hundred enterprises, either state-owned or private owned in china.
What’s more, we have built long, deep and close business relationship with dozens of steel company, Sharing and holding equities with several steel enterprises. Because of the close cooperation with steel companies and our pioneering spirit, which can ensure us stay at the top competition, and ensure our customers get what they really want!
FAQ
Q: Are you a manufacturer or merely a trader?
A: We are group of companies and owned manufacturer bases and trading company. We specialized in special steel which include alloy structural steel and carbon steel and stainless steel, etc. All material are with high quality and competitive price.
Q: How do you guarantee the quality of your product?
A: Firstly, we can provide the certificates from the third party, such as TUV, CE, if you need. Secondly, we have a complete set of inspection system and every process is checked by QC. Quality is the lifeline of enterprise survival.
Q: Delivery time?
A: We have ready stock for most of material grades in our warehouse. If the material doesn't have stock, the delivery lead time is about 5-30 days after receiving your prepayment or firm order.
Q: What is the payment term?
A: T/T or L/C.
Q: Can we visit your company and factory?
A: Yes, warmly welcome! We can book the hotel for you before you come to China and arrange our driver to our airport to pick you up when you come.
Company Details
Business Type:
Manufacturer,Distributor/Wholesaler,Agent,Exporter,Trading Company,Seller
Year Established:
2010
Total Annual:
10000000-25000000
Employee Number:
50~110
Ecer Certification：
Active Member
We, Shanghai Unite Steel are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national... We, Shanghai Unite Steel are committed to integrate engineering steel resources in china and serve the global engineering steel market. Our company has more than 15 years of experience in steel researching, production, managing and sales. And our team mostly are based on and worked in national...
Get in touch with us
Leave a Message, we will call you back quickly!