Hongya Power Generating Equipment To Utilities Limited
| Payment Terms | T/T |
| Supply Ability | 1 set 4-5 month |
| Delivery Time | 150 work days |
| Packaging Details | plywood |
| water head | 70 m |
| water flow | 2.64 m³/s |
| Runner Material | stainless steel |
| efficiency | 92.6 % |
| capacity | 1450 kw |
| frequency | 50HZ/60Hz |
| Power factor | 0.80 |
| Rated efficiency | 92.6 % |
| Brand Name | Wawushan |
| Model Number | HLA-069 |
| Certification | ISO9000 |
| Place of Origin | Sichuan |
View Detail Information
Explore similar products
Highly Hydro Electric Power System with Brushless Generator Type 400v or 6300v
Hydro Energy Generation System with Low Maintenance Requirements and Vertical
High Reliability Brushless Hydro Energy Generation System for Long-Term Power
1450 Kw Capacity Energy Storage Hydro Electric Power System with Brushless
Product Specification
| Payment Terms | T/T | Supply Ability | 1 set 4-5 month |
| Delivery Time | 150 work days | Packaging Details | plywood |
| water head | 70 m | water flow | 2.64 m³/s |
| Runner Material | stainless steel | efficiency | 92.6 % |
| capacity | 1450 kw | frequency | 50HZ/60Hz |
| Power factor | 0.80 | Rated efficiency | 92.6 % |
| Brand Name | Wawushan | Model Number | HLA-069 |
| Certification | ISO9000 | Place of Origin | Sichuan |
| High Light | 1450kw Francis Turbine Generator ，Francis Turbine Generator 70m Head ，70m Head turbine kaplan francis pelton | ||
1450kw Francis Turbina Generator For Hydro Power Station Water Head 70m
rief introduction of turbine structure and main component
1.Water inlet part
Water inlet part consists of valve. The valve is used to close the unit in static water when need stop, it is also used to close the unit and cut the water flow in dynamic water when the unit is in emergency and turbine distributor break down.
2.Spiral case
Spiral case is welding part, equipped with fixed guide vane in it. Spiral case shall make the water become number of swirl of water flow and guide water to flow regularly into guide vane apparatus and runner along circumference. It is equipped with an air relieve valve on the top of spiral case to exhaust air when filling water initially.
3.Turbine distributor
It consists of guide vane, guide vane lever, shaft sleeve, front cover, back cover, etc. It can form or change number of swirls of water flow to adjust turbine discharge according to variation of load. It is also used to normal and emergency shut down. The guide vane shaft sleeve has O ring for sealing. The control ring is welded by steel plate as a whole. Circular guiding rail and wiring plate with lubricating performance are located on the bottom surface of the control ring. The control ring has enough strength and rigidity, won’t occur excessive bending due to unbalance stress of servomotor. Counterweight is located on counterweight support. In case the servomotor is in fault, counterweight will close the guide vane by action of gravity.
4.Runner
Runner is the heart of turbine to change the water energy to mechanical energy. It is casted and welded as a whole, crown, band and blade is made of stainless steel ZG06Cr13Ni4Mo which has perfect performance of anti-cavitation, anti- corrosion and weldable. The runner is subject to static balance testing after machining. Holes on runner crown can reduce the pressure applied on runner by the water.
5.Draft tube assembly
Draft tube assembly consists of draft tube elbow and draft tube cone, guide the water flow into lower stream, make use of the potential energy of water flow at suction height, recycle major kinetic energy of the flow at runner outlet by its diffusion. All connecting flange shall be sealed, immersed depth of draft tube shall not be less than 30cm to prevent air into draft tube.
6.Pressure gauge and vacuum gauge
Pressure gauge is located on spiral case for observing the pressure in spiral case.
Vacuum gauge is located on draft tube elbow for observing the degree of vacuum. Valves shall be equipped on pressure gauge and vacuum gauge piping for close and open the piping.
| Place of Origin: | Sichuan, China |
| Brand Name: | Customized |
| Warranty: | 1 year |
| Application: | Hydropower Plant |
| Certificate: | ISO9001 |
| Lifetime | 35 years |
Company Details
Business Type:
Manufacturer,Exporter,Seller
Year Established:
2003
Total Annual:
800-1000
Employee Number:
70~110
Ecer Certification：
Verified Supplier
Established in 2003, Hongya power is an international company offering tailored solutions for “small”hydroelectric developments. Hongya power complete water to wire package includes design, manufacture,installation & commissioning. Hongya power offers a range of hydroe... Established in 2003, Hongya power is an international company offering tailored solutions for “small”hydroelectric developments. Hongya power complete water to wire package includes design, manufacture,installation & commissioning. Hongya power offers a range of hydroe...
Get in touch with us
Leave a Message, we will call you back quickly!